메뉴
Bare-metal UART skill for serial console and debug. Use when configuring baud rate, polling or IRQ-driven TX/RX, or integrating DMA with UART. Activates on queries about UART bare-metal, baud BRR, serial printf, or USART interrupt.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
SOC 직업 분류 기준
| name | uart-serial-baremetal |
| description | Bare-metal UART skill for serial console and debug. Use when configuring baud rate, polling or IRQ-driven TX/RX, or integrating DMA with UART. Activates on queries about UART bare-metal, baud BRR, serial printf, or USART interrupt. |
Implement UART/USART for debug console and device communication: baud rate calculation, 8N1 framing, polling and interrupt-driven I/O, overrun handling, and optional DMA basics.
printf/log output on new hardwareBRR = pclk / (16 * baud) /* oversampling by 16 — check RM for USART */
void usart2_init(uint32_t pclk, uint32_t baud) {
RCC->APB1ENR |= RCC_APB1ENR_USART2EN;
/* GPIO PA2/PA3 AF — see gpio-baremetal */
USART2->BRR = pclk / baud; /* simplified — RM has fractional formula */
USART2->CR1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE;
}
Verify pclk from actual clock tree (SystemCoreClock, APB prescaler).
void uart_putc(USART_TypeDef *u, char c) {
while (!(u->SR & USART_SR_TXE))
;
u->DR = (uint8_t)c;
}
char uart_getc(USART_TypeDef *u) {
while (!(u->SR & USART_SR_RXNE))
;
return (uint8_t)u->DR;
}
void USART2_IRQHandler(void) {
if (USART2->SR & USART_SR_RXNE) {
uint8_t b = USART2->DR;
rb_push(&rx_rb, b);
}
if (USART2->SR & USART_SR_ORE) {
(void)USART2->DR; /* clear overrun — required on STM32 */
}
}
printf (newlib)int _write(int fd, char *ptr, int len) {
(void)fd;
for (int i = 0; i < len; i++)
uart_putc(USART2, ptr[i]);
return len;
}
Link with --specs=nosys.specs or provide full syscalls.
/uart-serial-baremetal Calculate USART BRR for 115200 at 84 MHz PCLK
| Symptom | Cause | Fix |
|---|---|---|
| Garbage chars | Wrong baud/PCLK | Recompute BRR; check APB divider |
| Lost bytes | ORE not cleared | Read DR on ORE; use IRQ + ringbuf |
| No output | TX pin not AF | GPIO alternate function |
printf hangs | _write missing | Implement retarget |
skills/baremetal/gpio-baremetal — TX/RX pin muxskills/baremetal/interrupts-and-exceptions-baremetal — USART IRQskills/baremetal/dma-baremetal — UART RX DMAskills/embedded/openocd-jtag — semihosting alternativeCustom allocator skill for memory allocation strategies. Use when implementing pool/slab/arena allocators, tuning jemalloc/mimalloc, writing Rust GlobalAlloc, or benchmarking allocator performance. Activates on queries about jemalloc, mimalloc, tcmalloc, arena allocator, GlobalAlloc, or fragmentation.
NUMA programming skill for multi-socket memory locality. Use when detecting NUMA topology, binding processes with numactl, using libnuma API, building NUMA-aware data structures, or measuring remote access penalties. Activates on queries about numactl, libnuma, NUMA topology, mbind, lstopo, or remote memory access.
AF_XDP skill for high-performance XDP sockets. Use when creating AF_XDP sockets, configuring UMEM and XSK rings, XDP_REDIRECT programs, copy vs zero-copy mode, or comparing with DPDK. Activates on queries about AF_XDP, xsk_umem, XDP_REDIRECT, libbpf xsk, or zero-copy XDP.
DPDK skill for userspace packet I/O. Use when initializing EAL, configuring PMD drivers, using mbuf pools and rte_ring, setting up huge pages, RSS, or testpmd validation. Activates on queries about DPDK, EAL, rte_eth_rx_burst, hugepages, PMD, or testpmd.
io_uring skill for Linux async I/O. Use when building high-performance servers with liburing, multi-shot operations, provided buffers, fixed files, zero-copy send, or tokio-uring. Activates on queries about io_uring, SQE/CQE, liburing, IORING_OP_PROVIDE_BUFFERS, or io_uring vs epoll.
Bare-metal ADC and DAC skill. Use when configuring analog sampling, DMA-driven ADC, calibration, or DAC output on MCUs. Activates on queries about ADC bare-metal, sampling time, DMA ADC, or DAC channel setup.