omni-gateway-install

name

omni-gateway-install

description

Install and register MuleSoft Omni Gateway on self-managed infrastructure: Linux (Ubuntu/Debian via APT), Docker or Docker Compose, or Kubernetes / OpenShift (Helm). Use when the user wants to install Omni Gateway, connect it to Anypoint Platform's control plane, re-register after a token expires or a new environment is needed, and verify the gateway is running. CloudHub 2.0 managed deployments are not covered by this skill bundle.

Install Omni Gateway

Choose Your Platform

Pick the target platform, then read the matching reference file for the full step-by-step walkthrough. Each reference covers both connected mode (registered with Anypoint Platform) and local mode (standalone).

flowchart TD
    Start{Which platform?}

    Start -->|Linux Ubuntu/Debian| L[references/linux.md]
    Start -->|Docker or Docker Compose| D[references/docker.md]
    Start -->|Kubernetes or OpenShift| K[references/kubernetes.md]

Platform	Read	Covers
Linux (Ubuntu/Debian, APT)	references/linux.md	APT repo setup, flex-gateway package, systemd service
Docker / Docker Compose	references/docker.md	Image pull, docker run and Compose, conf.d bind mount
Kubernetes / OpenShift (Helm)	references/kubernetes.md	Helm repo, values.yaml, OpenShift SCC settings

RHEL, CentOS, and Amazon Linux are not covered by the APT instructions. Contact the MuleSoft gateway team for RPM repository details — do not use the APT repository on RPM-based systems.

After completing the platform walkthrough, return here for connected-mode verification and troubleshooting.

---

Connected mode vs. local mode

All three platforms support two modes; pick before you start:

• Connected mode — the gateway registers with Anypoint Platform and appears in Runtime Manager. Requires an organization ID and a registration token (expires 24 hours after issue).
• Local mode — the gateway runs standalone with no control-plane connection. Skip the registration step in the platform reference.

Each platform reference spells out which steps to skip for local mode.

---

Confirm in Anypoint Runtime Manager (connected mode)

After installation and registration, verify that the gateway is online.

Option 1: Anypoint Platform UI

1. Navigate to Anypoint Platform → Runtime Manager → Flex Gateways
2. Find your gateway by name
3. Confirm the status shows STARTED (green indicator)

Option 2: Flex Gateway Manager API

GET https://anypoint.mulesoft.com/flexgateway/api/v1/organizations/{orgID}/environments/{envID}/gateways/{gatewayID}
Authorization: Bearer <access-token>

Expect a 200 response with "status": "STARTED".

---

Troubleshooting

Problem	Likely Cause	Fix
authentication failed or 401 Unauthorized	Token expired or belongs to a different organization	Generate a fresh token from Runtime Manager → Add Gateway → Self-managed, then re-run registration
environment not found or 404	Organization ID wrong or token scoped to a different organization	Verify org ID in Anypoint Admin Settings and regenerate token in the correct organization
permission denied or conf.d not writable	Output directory has restrictive permissions	Run sudo chown -R $USER /usr/local/share/mulesoft/flex-gateway/conf.d (Linux) or adjust volume permissions (Docker/Kubernetes)
409 Conflict — gateway already registered	A gateway with this name already exists in Anypoint	Use a different <gateway-name> or delete the old record from Runtime Manager
Status stays DISCONNECTED after restart	Registration file not in conf.d, or gateway using wrong conf.d path	Verify with ls -la /usr/local/share/mulesoft/flex-gateway/conf.d/; for Docker/Kubernetes check volume mount path
flexctl: command not found (Linux)	flexctl is not in $PATH	Reinstall flex-gateway or add the installation directory to $PATH
Container exits immediately (Docker)	Missing or malformed registration.yaml, permissions mismatch on conf.d/, or port in use	Run docker logs flex-gateway to see the error
bind: address already in use	Another process is listening on the mapped port	Change the host-side port (e.g., -p 18081:8081) or stop the conflicting process
ImagePullBackOff (Kubernetes)	Node cannot reach Docker Hub or image tag does not exist	Check network egress rules; confirm tag with docker pull mulesoft/flex-gateway:<tag>
(Kubernetes)

---

Next Steps After Installation

Once the gateway is installed and running:

1. Apply a policy to an API — configure API proxying and security: see secure-api.
2. Monitor logs — parse and interpret gateway log output: see omni-gateway-logs.
3. Validate your conf.d configuration — check YAML resource files for misconfigurations before deploying changes: see omni-gateway-config.

---

Related Jobs

• omni-gateway-config — Validate conf.d YAML configuration
• omni-gateway-logs — Parse and interpret gateway log output
• omni-gateway-diagnose — End-to-end triage when the gateway returns errors