quality-checks
Use when asked to "fix things", "qa", "run tests and fix things", "test until clean", or similar requests to iteratively run quality checks and fix failures until everything passes. Don't use for single-purpose tasks like running only tests or only linting without fixes.
소스 정보
- 저장소
- tedivm/opencode-config
- 최근 소스 활동
- 2026년 5월 22일 15:01
- 감지된 SKILL.md 언어
- 영어
- 스타
- 15
- 포크
- 2
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
SKILL.md 표시 중
SKILL.md
소스 지침 · 읽기 전용 미리보기- name
- quality-checks
- description
- Use when asked to "fix things", "qa", "run tests and fix things", "test until clean", or similar requests to iteratively run quality checks and fix failures until everything passes. Don't use for single-purpose tasks like running only tests or only linting without fixes.
- license
- MIT
- metadata
- {"author":"Robert Hafner","source":"https://github.com/tedivm/opencode-config"}
## Quick start
Discover project tooling, run all quality checks, fix failures, and repeat until everything passes.
## Workflow
1. Check for task definitions in `AGENTS.md`, `Makefile`, `justfile`, or `package.json` scripts
2. Identify commands for: tests, linting, formatting, documentation builds, and other chores
3. Run all checks and capture results
4. If any check fails, fix the issues
5. Re-run formatting/chores, then the full test suite
6. Repeat steps 4-5 until all checks pass
7. Report final status
## Constraints
- Prefer project-defined tooling (AGENTS.md, Makefile, justfile, package.json) over guessing
- On subsequent runs, reuse previously discovered commands instead of re-researching
- Always re-run the full suite after each fix — do not assume partial re-checks are sufficient
- Report all failures with file paths and line numbers before fixing
## Checklist
- [ ] Test suite executed
- [ ] Lint/format checks completed
- [ ] Documentation/chores run (if applicable)
- [ ] All failures fixed
- [ ] Final pass confirms everything green
GitHub에서 보기