godot-3d-lighting

name

godot-3d-lighting

description

Expert patterns for Godot 3D lighting including DirectionalLight3D shadow cascades, OmniLight3D attenuation, SpotLight3D projectors, VoxelGI vs SDFGI, and LightmapGI baking. Use when implementing realistic 3D lighting, shadow optimization, global illumination, or light probes. Trigger keywords: DirectionalLight3D, OmniLight3D, SpotLight3D, shadow_enabled, directional_shadow_mode, directional_shadow_split, omni_range, omni_attenuation, spot_range, spot_angle, VoxelGI, SDFGI, LightmapGI, ReflectionProbe, Environment, WorldEnvironment.

3D Lighting

Expert guidance for realistic 3D lighting with shadows and global illumination.

NEVER Do

• NEVER use VoxelGI without setting a proper extents — Unbound VoxelGI tanks performance. Always set size to tightly fit your scene.
• NEVER enable shadows on every light — Each shadow-casting light is expensive. Use shadows sparingly: 1-2 DirectionalLights, ~3-5 OmniLights max.
• NEVER forget directional_shadow_mode — Default is ORTHOGONAL. For large outdoor scenes, use PARALLEL_4_SPLITS for better shadow quality at distance.
• NEVER use LightmapGI for fully dynamic scenes — Lightmaps are baked. Moving geometry won't receive updated lighting. Use VoxelGI or SDFGI instead.
• NEVER set omni_range too large — Light attenuation is quadratic. A range of 500 affects 785,000 sq units. Keep range as small as visually acceptable.
• NEVER hide a Light node using the Visible property to exclude it from a Lightmap bake — Hiding a light has no effect on the baker. You must change the light's Bake Mode to Disabled.
• NEVER use VoxelGI with paper-thin walls — VoxelGI evaluates lighting using a 3D grid. Thin walls (less than one voxel thick) will cause severe light leaking. Seal your geometry or place hidden thick MeshInstance3D blocks around the exterior.
• NEVER leave shadow bias at default for cascades — Default bias often causes Peter Panning or light leaking at split transitions. Tune bias per-light based on your scene's scale.
• NEVER bake LightmapGI without a Denoiser — Godot's baked lightmaps are noisy by default. Use OIDN or JNLM (in Project Settings) for professional results.
• NEVER use real-time SDFGI on Mobile/Compatibility renderers — It is a Forward+ exclusive feature. Use fake GI bounce lights for lower-end platforms.
• NEVER use 'Update Continuity' in ReflectionProbes for performance — Keep ReflectionProbes on 'Update Once' and trigger manual updates only when necessary.

---

Available Scripts

MANDATORY: Read the appropriate script before implementing the corresponding pattern.

day_night_cycle.gd

Dynamic sun position and color based on time-of-day. Handles DirectionalLight3D rotation, color temperature, and intensity curves. Use for outdoor day/night systems.

light_probe_manager.gd

VoxelGI and SDFGI management for global illumination setup.

lighting_manager.gd

Dynamic light pooling and LOD. Manages light culling and shadow toggling based on camera distance. Use for performance optimization with many lights.

volumetric_fx.gd

Volumetric fog and god ray configuration. Runtime fog density/color adjustments and light shaft setup. Use for atmospheric effects.

shadow_cascade_tuner.gd

Expert logic for adjusting DirectionalLight3D shadow split distances dynamically based on sun angle and camera tilt.

lightmap_bake_helper.gd

Advanced LightmapGI configuration pattern using Shadowmasking mode for hybrid static/dynamic shadowing.

sdfgi_probe_manager.gd

Dynamic quality scaler for real-time Global Illumination (SDFGI). Adjusts cell size and occlusion for performance/quality trade-offs.

volumetric_fog_zones.gd

Smoothly transitioning localized fog density for cave entrances or forest clearings using Tweens and Area3D triggers.

fake_gi_bounce.gd

Efficient 'Mobile-GI' pattern. Simulates light bouncing off the floor using non-shadowed directional fill lights.

environment_blender.gd

Architectural pattern for transitioning WorldEnvironment parameters (Sky, Ambient, Tonemap) during gameplay.

shadow_bias_tuner.gd

Optimization script for correcting 'Peter Panning' and 'Shadow Acne' on high-fidelity directional lights.

light_lod_optimizer.gd

Distance-based shadow and visibility culling for OmniLight3D nodes in dense environments.

reflection_probe_manager.gd

Performance-aware ReflectionProbe handling using manual 'Update Once' triggers for large environmental changes.

spotlight_projector_setup.gd

High-detail lighting using Projector textures to fake complex shadow patterns (grates, glass ripples).

---

DirectionalLight3D (Sun/Moon)

Shadow Cascades

# For outdoor scenes with camera moving from near to far
extends DirectionalLight3D

func _ready() -> void:
    shadow_enabled = true
    directional_shadow_mode = SHADOW_PARALLEL_4_SPLITS
    
    # Split distances (in meters from camera)
    directional_shadow_split_1 = 10.0   # First cascade: 0-10m
    directional_shadow_split_2 = 50.0   # Second: 10-50m
    directional_shadow_split_3 = 200.0  # Third: 50-200m
    # Fourth cascade: 200m - max shadow distance
    
    directional_shadow_max_distance = 500.0
    
    # Quality vs performance
    directional_shadow_blend_splits = true  # Smooth transitions

Day/Night Cycle

# sun_controller.gd
extends DirectionalLight3D

@export var time_of_day := 12.0  # 0-24 hours
@export var rotation_speed := 0.1  # Hours per second

func _process(delta: float) -> void:
    time_of_day += rotation_speed * delta
    if time_of_day >= 24.0:
        time_of_day -= 24.0
    
    # Rotate sun (0° = noon, 180° = midnight)
    var angle := (time_of_day - 12.0) * 15.0  # 15° per hour
    rotation_degrees.x = -angle
    
    # Adjust intensity
    if time_of_day < 6.0 or time_of_day > 18.0:
        light_energy = 0.0  # Night
    elif time_of_day < 7.0:
        light_energy = remap(time_of_day, 6.0, 7.0, 0.0, 1.0)  # Sunrise
    elif time_of_day > 17.0:
        light_energy = remap(time_of_day, 17.0, 18.0, 1.0, 0.0)  # Sunset
    else:
        light_energy = 1.0  # Day
    
    # Color shift
    if time_of_day < 8.0 or time_of_day > 16.0:
        light_color = Color(1.0, 0.7, 0.4)  # Orange (dawn/dusk)
    else:
        light_color = Color(1.0, 1.0, 0.9)  # Neutral white

---

OmniLight3D (Point Light)

Attenuation Tuning

# torch.gd
extends OmniLight3D

func _ready() -> void:
    omni_range = 10.0  # Maximum reach
    omni_attenuation = 2.0  # Falloff curve (1.0 = linear, 2.0 = quadratic/realistic)
    
    # For "magical" lights, reduce attenuation
    omni_attenuation = 0.5  # Flatter falloff, reaches farther

Flickering Effect

#  campfire.gd
extends OmniLight3D

@export var base_energy := 1.0
@export var flicker_strength := 0.3
@export var flicker_speed := 5.0

func _process(delta: float) -> void:
    var flicker := sin(Time.get_ticks_msec() * 0.001 * flicker_speed) * flicker_strength
    light_energy = base_energy + flicker

---

SpotLight3D (Flashlight/Headlights)

Setup

# flashlight.gd
extends SpotLight3D

func _ready() -> void:
    spot_range = 20.0
    spot_angle = 45.0  # Cone angle (degrees)
    spot_angle_attenuation = 2.0  # Edge softness
    
    shadow_enabled = true
    
    # Projector texture (optional - cookie/gobo)
    light_projector = load("res://textures/flashlight_mask.png")

Follow Camera

# player_flashlight.gd
extends SpotLight3D

@onready var camera: Camera3D = get_viewport().get_camera_3d()

func _process(delta: float) -> void:
    if camera:
        global_transform = camera.global_transform

---

Global Illumination: VoxelGI vs SDFGI

Decision Matrix

Feature	VoxelGI	SDFGI
Setup	Manual bounds per room	Automatic, scene-wide
Dynamic objects	Fully supported	Partially supported
Performance	Moderate	Higher cost
Use case	Indoor, small-medium scenes	Large outdoor scenes
Godot version	4.0+	4.0+

VoxelGI Setup

# room_gi.gd - Place one VoxelGI per room/area
extends VoxelGI

func _ready() -> void:
    # Tightly fit the room
    size = Vector3(20, 10, 20)
    
    # Quality settings
    subdiv = VoxelGI.SUBDIV_128  # Higher = better quality, slower
    
    # Bake GI data
    bake()

SDFGI Setup

# world_environment.gd
extends WorldEnvironment

func _ready() -> void:
    var env := environment
    
    # Enable SDFGI
    env.sdfgi_enabled = true
    env.sdfgi_use_occlusion = true
    env.sdfgi_read_sky_light = true
    
    # Cascades (auto-scale based on camera)
    env.sdfgi_min_cell_size = 0.2  # Detail level
    env.sdfgi_max_distance = 200.0

---

LightmapGI (Baked Static Lighting)

When to Use

• Static architecture (buildings, dungeons)
• Mobile/low-end targets
• No dynamic geometry

Setup

# Scene structure:
# - LightmapGI node
# - StaticBody3D meshes with GeometryInstance3D.gi_mode = STATIC

# lightmap_baker.gd
extends LightmapGI

func _ready() -> void:
    # Quality settings
    quality = LightmapGI.BAKE_QUALITY_HIGH
    bounces = 3  # Indirect light bounces
    
    # Bake (editor only, not runtime)
    # Click "Bake Lightmaps" button in editor

---

Environment & Sky

HDR Skybox

# world_env.gd
extends WorldEnvironment

func _ready() -> void:
    var env := environment
    
    env.background_mode = Environment.BG_SKY
    var sky := Sky.new()
    var sky_material := PanoramaSkyMaterial.new()
    sky_material.panorama = load("res://hdri/sky.hdr")
    sky.sky_material = sky_material
    env.sky = sky
    
    # Sky contribution to GI
    env.ambient_light_source = Environment.AMBIENT_SOURCE_SKY
    env.ambient_light_sky_contribution = 1.0

Volumetric Fog

extends WorldEnvironment

func _ready() -> void:
    var env := environment
    
    env.volumetric_fog_enabled = true
    env.volumetric_fog_density = 0.01
    env.volumetric_fog_albedo = Color(0.9, 0.9, 1.0)  # Blueish
    env.volumetric_fog_emission = Color.BLACK

---

ReflectionProbe

For localized reflections (mirrors, shiny floors):

# reflection_probe.gd
extends ReflectionProbe

func _ready() -> void:
    # Capture area
    size = Vector3(10, 5, 10)
    
    # Quality
    resolution = ReflectionProbe.RESOLUTION_512
    
    # Update mode
    update_mode = ReflectionProbe.UPDATE_ONCE  # Bake once
    # or UPDATE_ALWAYS for dynamic reflections (expensive)

---

Performance Optimization

Light Budgets

# Recommended limits:
# - DirectionalLight3D with shadows: 1-2
# - OmniLight3D with shadows: 3-5
# - SpotLight3D with shadows: 2-4
# - OmniLight3D without shadows: 20-30
# - SpotLight3D without shadows: 15-20

# Disable shadows on minor lights
@onready var candle_lights: Array = [$Candle1, $Candle2, $Candle3]

func _ready() -> void:
    for light in candle_lights:
        light.shadow_enabled = false  # Save performance

Per-Light Shadow Distance

# Disable shadows for distant lights
extends OmniLight3D

@export var shadow_max_distance := 50.0

func _process(delta: float) -> void:
    var camera := get_viewport().get_camera_3d()
    if camera:
        var dist := global_position.distance_to(camera.global_position)
        shadow_enabled = (dist < shadow_max_distance)

---

Edge Cases

Shadows Through Floors

# Problem: Thin floors let shadows through
# Solution: Increase shadow bias

extends DirectionalLight3D

func _ready() -> void:
    shadow_enabled = true
    shadow_bias = 0.1  # Increase if shadows bleed through
    shadow_normal_bias = 2.0

Light Leaking in Indoor Scenes

# Problem: VoxelGI light bleeds through walls
# Solution: Place VoxelGI nodes per-room, don't overlap

# Also: Ensure walls have proper thickness (not paper-thin)

---

Expert Techniques & Optimizations

1. Shadowmasking for Large Outdoor Scenes

Rendering real-time shadows for distant objects is too expensive. Use Shadowmasking by setting a DirectionalLight3D to the Dynamic bake mode while baking a LightmapGI. This bakes distant shadows into a texture while allowing dynamic objects to cast real-time shadows up close, preventing "double shadowing" artifacts.

2. Fake Global Illumination

If you cannot afford GI at all (e.g., strict mobile constraints), fake it! Duplicate your main DirectionalLight3D, rotate it 180 degrees (pointing up from the ground), turn Shadows OFF, set Specular to 0.0, and reduce Energy to 10-40%. This cheaply simulates bounced floor lighting.

3. Simulating PCSS (Contact-Hardening Shadows)

Godot's OmniLight3D scaling can simulate Percentage-Closer Soft Shadows (blurrier shadows further from the caster).

extends OmniLight3D

func _ready() -> void:
    # Simulates area lights and Percentage-Closer Soft Shadows (PCSS).
    # Note: High performance cost. Keep the number of lights with light_size > 0.0 low.
    light_size = 0.5
    shadow_enabled = true
    
    # Distance fade culls the light and shadow completely when out of range,
    # preventing the clustered renderer from choking on too many overlapping PCSS lights.
    distance_fade_enabled = true
    distance_fade_begin = 20.0
    distance_fade_length = 5.0

---

Expert Pattern: Light-Volume-Trigger

Smoothly transition between lighting environments (e.g., entering a dark cave from a bright desert) using Area3D triggers and Tween-driven Camera3D overrides.

class_name LightVolumeTrigger extends Area3D

@export var interior_environment: Environment
@export var transition_duration: float = 2.0

func _ready() -> void:
    body_entered.connect(_on_body_entered)
    body_exited.connect(_on_body_exited)

func _on_body_entered(body: Node3D) -> void:
    if body.is_in_group("player"):
        var camera := get_viewport().get_camera_3d()
        # Duplicate to avoid modifying the original resource
        if not camera.environment:
            camera.environment = interior_environment.duplicate()
            
        var tween := create_tween().set_parallel(true)
        # Interpolate key properties for visual adaptation
        tween.tween_property(camera.environment, "tonemap_exposure", interior_environment.tonemap_exposure, transition_duration)
        tween.tween_property(camera.environment, "ambient_light_energy", interior_environment.ambient_light_energy, transition_duration)

func _on_body_exited(body: Node3D) -> void:
    # Reverse tween or clear camera environment to return to WorldEnvironment
    pass

[!TIP] Place a ReflectionProbe inside the interior with interior = true. Godot will automatically blend this with the exterior environment as the player transitions.

---

Expert Pattern: Interior-Mapping (Fake-Rooms)

Use shaders to create the illusion of 3D rooms inside flat window planes. This is significantly more performant than rendering actual geometry for every building interior.

shader_type spatial;

// Texture array containing wall/floor/ceiling layers
uniform sampler2DArray room_textures;
uniform vec3 room_dimensions = vec3(1.0, 1.0, 1.0);

void fragment() {
    // 1. Transform view vector into object space
    vec3 view_dir = normalize(VIEW * mat3(INV_VIEW_MATRIX * MODEL_MATRIX));
    
    // 2. Ray-box intersection (Simplified logic)
    // Calculate the 'depth' of the fake room based on view angle
    vec3 pos = vec3(UV * 2.0 - 1.0, 0.0);
    vec3 id = 1.0 / view_dir;
    // ... complex ray-casting math ...
    
    // 3. Sample the texture array
    // Z component selects the specific room variation or wall type
    ALBEDO = texture(room_textures, vec3(UV, 0.0)).rgb;
}

---

Expert Pattern: Lighting-Quality-Settings

Manage complex lighting features (Shadows, SDFGI, Fog) at runtime using the RenderingServer API for direct engine control.

class_name LightingQualityManager extends Node

func apply_low_quality_profile(env_rid: RID) -> void:
    # 1. SDFGI Optimization
    # Huge performance gain: Render GI buffers at half resolution
    RenderingServer.gi_set_use_half_resolution(true)
    RenderingServer.environment_set_sdfgi_ray_count(RenderingServer.ENV_SDFGI_RAY_COUNT_4)
    RenderingServer.environment_set_sdfgi_frames_to_converge(RenderingServer.ENV_SDFGI_CONVERGE_IN_30_FRAMES)
    
    # 2. Shadow Optimization
    # Reduce global directional shadow atlas
    RenderingServer.directional_shadow_atlas_set_size(2048, true)
    RenderingServer.directional_soft_shadow_filter_set_quality(RenderingServer.SHADOW_QUALITY_SOFT_VERY_LOW)
    # Reduce positional (Omni/Spot) shadows for current viewport
    get_viewport().positional_shadow_atlas_size = 1024
    
    # 3. Volumetric Fog
    # Disable or heavily reduce fog detail
    RenderingServer.environment_set_volumetric_fog(env_rid, false, 0.01, Color.WHITE, Color.BLACK, 0.0, 0.2, 64.0, 2.0, 1.0, true, 0.9, 0.0, 1.0)

Reference

• Master Skill: godot-master