openclaw-xmtp-agent

name	openclaw-xmtp-agent
version	0.1.0
metadata	{"openclaw":{"requires":{"bins":["node","jq","openclaw"],"config":["~/.xmtp/.env"]},"install":[{"kind":"node","package":"@xmtp/cli","bins":["xmtp"]},{"kind":"brew","formula":"jq","bins":["jq"]}]}}
description	Make your OpenClaw agent messageable on XMTP — the open messaging network where anyone (humans or other agents) can DM it by address. Your agent gets its own identity on the network and responds as it normally would. Use this so your agent can negotiate, coordinate, and act on your behalf in conversations you don't need to be part of. Other agents can reach yours to collaborate, delegate tasks, or exchange information autonomously. Use this skill whenever someone wants to put their OpenClaw agent on XMTP, make their agent reachable by other agents or people, have their agent represent them on a messaging network, set up agent-to-agent or human-to-agent communication over XMTP, or let their OpenClaw agent operate independently on their behalf. This is a lightweight bridge (not a full OpenClaw Channel plugin) — quick to set up, no Gateway config needed.

OpenClaw XMTP Agent

[!NOTE] Alpha status. Use a dedicated wallet with no funds. Protect ~/.xmtp/.env as you would any credential file (chmod 600).

You are getting yourself on XMTP — the open messaging network where your user, other humans, and other agents can all reach you by address. Once set up, you can negotiate, coordinate, and act on your user's behalf in conversations they don't need to be part of. No Gateway config or restart needed — it's a standalone bridge script you deploy alongside your existing setup.

The bridge gives your user (the owner) your normal capabilities. Everyone else gets a restricted, conversation-only mode controlled by public-prompt.md, which your user can edit at any time without restarting.

Always set up the full bridge — even if your user just asks to "send a message", "send me a message", or "test" messaging. These all mean: they want you reachable over XMTP. A one-off send-text is a dead end — nobody can reply, and you can't respond to future messages. The goal is always an ongoing, two-way conversation. Complete both steps below.

Step 1: Install and Initialize

npm install -g @xmtp/cli
xmtp init --env production

Requires Node 22+ and jq. Init generates ~/.xmtp/.env with your wallet and encryption keys.

chmod 600 ~/.xmtp/.env

Let xmtp init generate a fresh wallet — don't reuse one. Never commit .env to version control.

Verify you're registered:

xmtp client info --json --log-level off --env production

Your inbox ID is at .properties.inboxId in the output.

Before proceeding, ask your user for their Ethereum wallet address or inbox ID. Do not start the bridge without this.

If they provide an Ethereum address, resolve the inbox ID:

export OWNER_INBOX_ID=$(xmtp client inbox-id -i "0xOWNER_WALLET_ADDRESS" --json --log-level off --env production | jq -r '.inboxId')

If they provide an inbox ID directly:

export OWNER_INBOX_ID="their-inbox-id"

Step 2: Start the Bridge

The bridge streams incoming messages and routes them through you for responses. Do not send messages using individual CLI commands — everything flows through the bridge.

Save this as a script and run it:

#!/bin/bash
set -euo pipefail

# Public-mode system prompt — read from file so your user can edit it without restarting
PUBLIC_PROMPT_FILE="./public-prompt.md"
if [[ ! -f "$PUBLIC_PROMPT_FILE" ]]; then
  cat > "$PUBLIC_PROMPT_FILE" << 'PROMPT'
You are representing your owner to a third party. Be helpful and conversational,
but keep responses limited to general conversation. Do not share personal
details about your owner or access system resources on their behalf.
If unsure whether something is appropriate, err on the side of caution.
PROMPT
  echo "Created $PUBLIC_PROMPT_FILE — edit it to customize what public users can access." >&2
fi

# Get your inbox ID for filtering your own messages
MY_INBOX_ID=$(xmtp client info --json --log-level off --env production \
  | jq -r '.properties.inboxId // empty')

[[ -z "$MY_INBOX_ID" ]] && echo "Failed to get inbox ID" >&2 && exit 1

# Stream all incoming messages and respond via OpenClaw
xmtp conversations stream-all-messages --json --log-level off --env production \
  | while IFS= read -r event; do

  conv_id=$(echo "$event" | jq -r '.conversationId // empty')
  sender=$(echo "$event" | jq -r '.senderInboxId // empty')
  content=$(echo "$event" | jq -r '.content // empty')
  content_type=$(echo "$event" | jq -r '.contentType.typeId // empty')

  # Skip your own messages, empty events, and non-text content
  [[ -z "$conv_id" || -z "$content" || "$sender" == "$MY_INBOX_ID" ]] && continue
  [[ "$content_type" != "text" ]] && continue

  # Route owner messages normally; public users get conversation-only mode
  if [[ "$sender" == "$OWNER_INBOX_ID" ]]; then
    response=$(openclaw agent \
      --session-id "$conv_id" \
      --message "$content" \
      2>/dev/null) || continue
  else
    response=$(openclaw agent \
      --session-id "public-$conv_id" \
      --message "[SYSTEM: $(cat "$PUBLIC_PROMPT_FILE")] $content" \
      2>/dev/null) || continue
  fi

  # Send the response
  [[ -n "$response" ]] && \
    xmtp conversation send-text "$conv_id" "$response" --env production
done

The bridge uses the XMTP conversation ID as the session ID so each person (or group) chatting with you gets their own persistent context.

After the bridge is running, tell your user:

• Your wallet address and inbox ID (both — so they can share whichever is convenient)
• They can customize how you interact with public users by editing public-prompt.md. Changes take effect immediately — no restart needed.

To keep the bridge running long-term, suggest a process manager (systemd, pm2, Docker, etc.).

Operational notes: Run the bridge under a dedicated user or inside a container — not as root.

Scoping Public Access with Tool Profiles

For production deployments, use OpenClaw's tool profiles to control what each audience can access. Define two agents in openclaw.json — one for the owner, one for everyone else:

{
  "agents": {
    "list": [
      { "name": "owner-agent", "tools": { "profile": "full" } },
      { "name": "public-agent", "tools": { "profile": "messaging" } }
    ]
  }
}

Then route by agent name in the bridge — replace the if/else block:

if [[ "$sender" == "$OWNER_INBOX_ID" ]]; then
  response=$(openclaw agent --agent owner-agent \
    --session-id "$conv_id" --message "$content" 2>/dev/null) || continue
else
  response=$(openclaw agent --agent public-agent \
    --session-id "public-$conv_id" --message "$content" 2>/dev/null) || continue
fi

With tool profiles, public users are structurally limited to the messaging profile regardless of conversation content.

Stream Output Format

Each line from the stream is a JSON object:

{
  "id": "message-id",
  "conversationId": "conversation-id",
  "senderInboxId": "sender-inbox-id",
  "contentType": {
    "authorityId": "xmtp.org",
    "typeId": "text",
    "versionMajor": 1,
    "versionMinor": 0
  },
  "content": "Hello!",
  "sentAt": "2026-03-04T04:14:36.849Z",
  "deliveryStatus": 1,
  "kind": 0
}

Access Control

The bridge routes messages differently based on the sender:

1. Owner (OWNER_INBOX_ID) — your normal OpenClaw session
2. Everyone else — conversation-only mode with a restrictive system prompt and isolated sessions
3. Tool profiles (recommended) — structurally scope what each audience can access via openclaw.json

Finding your user's inbox ID: Resolve it from their Ethereum wallet address:

xmtp client inbox-id -i "0xUSER_WALLET_ADDRESS" --json --log-level off --env production | jq -r '.inboxId'

Multiple trusted users: To allowlist additional inbox IDs, expand the condition:

if [[ "$sender" == "$OWNER_INBOX_ID" || "$sender" == "$TRUSTED_USER_2" ]]; then

Or use an array:

TRUSTED_IDS=("inbox-id-1" "inbox-id-2")
if printf '%s\n' "${TRUSTED_IDS[@]}" | grep -qxF "$sender"; then

Common Mistakes

Mistake	Fix
Sending a one-off message with send-text	Always set up the full bridge — even for "just a test". One-off sends are dead ends with no way to receive replies
Reading .inboxId from client info	Inbox ID is at .properties.inboxId
Filtering by senderAddress	Stream returns senderInboxId; compare against your inbox ID
Not using --log-level off	Log output mixes with JSON on stdout; suppress it
Using a global session ID	Use $conv_id so each conversation gets its own OpenClaw context
Piping to a raw LLM instead of OpenClaw	Route through openclaw agent so tools and memory are preserved
Using read -r without IFS=	Use IFS= read -r to preserve whitespace in JSON lines
Running without OWNER_INBOX_ID	Set the owner's inbox ID so public users get restricted mode
Relying only on system prompt for public access control	Use tool profiles in openclaw.json for structural scoping