| name | avr:check |
| version | 1.0.0 |
| description | Pre-flight system check. Verifies all hardware is connected and reachable.
|
| allowed-tools | ["Bash","Read","Write","Edit","Glob","Grep","Agent","AskUserQuestion"] |
/avr:check
Run a pre-flight system check to verify all hardware is connected and working.
Arguments
None.
Workflow
Step 1 — Run check_system
Call the check_system MCP tool. This runs all pre-flight checks in parallel:
- Config: Valid config.yaml present
- miniDSP: USB device connected + minidspd daemon reachable
- Denon AVR: AVR reachable (with auto-discovery if host not configured)
- Signal Path: DSP source/preset matches config (if configured)
Step 2 — Report results
For each check, report:
- Pass/fail status
- Detail (what was found)
- Error message and fix suggestion if failed
Format as a clear checklist.
Step 3 — Troubleshoot failures
If any check failed, provide specific debugging guidance:
- Config: Suggest running
/avr:configure to configure.
- miniDSP USB: Check USB cable, try different port, check
lsusb output.
- miniDSP daemon: Check if minidspd is running (
systemctl status minidspd).
- Denon AVR: Check power, network, try ping. Suggest
/avr:configure to configure host.
- Signal Path: Explain the mismatch and what to do about it.
Step 4 — Overall verdict
If all checks pass: "System is ready for calibration."
If some fail: "N of M checks failed. Fix the issues above before calibrating."
Important rules
- Always run check_system first. Don't try to manually check things.
- Be specific about fixes. Don't just say "check the connection" — say which cable, which port.
- Suggest /avr:configure if config is missing or incomplete.
