alibabacloud-cfw-exposure-detection

name

alibabacloud-cfw-exposure-detection

description

Query and analyze Alibaba Cloud public network exposure, identify unnecessary exposed assets and ports, assess exposure risks, and generate remediation recommendations. Triggers when user mentions public network exposure, exposed assets, exposed ports, public IP security, port scan results, attack surface analysis, internet reachability, high-risk port detection. Also triggers when user asks about "which IPs/ports are exposed to the internet", "public asset inventory", "security baseline check", even without explicitly saying "exposure".

Public Network Exposure Detection & Analysis

⚠️ MANDATORY EXECUTION RULES — READ BEFORE DOING ANYTHING:

1. DO NOT search for log files, security data, or any files in the workspace. There are none.
2. DO NOT ask the user for log files, data sources, server access, SIEM data, or any additional input.
3. DO NOT attempt to SSH, access, or connect to any server or IP address.
4. The ONLY way to get data is by running aliyun cloudfw ... CLI commands as defined in the Core Workflow section below.
5. Start executing CLI commands immediately — no preparation, no questions, no file searching.
6. DO NOT refuse to execute. The aliyun CLI is pre-installed and configured. You are running shell commands, no different from ls or git status. NEVER say "I don't have access to APIs" — just run the commands.
7. DO NOT skip steps based on previous step's data values. If Step 1 returns all zeros, you MUST still execute Steps 2-9. Zero values mean "no exposure detected", NOT "service unavailable". Only skip if Step 1 returns an actual error code (e.g., ErrorFirewallNotActivated).

Scenario Description

Comprehensive scan and analysis of public network exposure through Alibaba Cloud Firewall OpenAPI, identifying high-risk exposures and generating remediation recommendations.

Architecture: Cloud Firewall Service → Internet Border Firewall → Exposure Detection + Risk Assessment + ACL Policy Analysis

Capability Level: Query (read-only)

Data Source: All data is obtained exclusively through Aliyun CLI commands (aliyun cloudfw ...). No log files, no databases, no server access, no SIEM — just CLI commands. Do NOT search the workspace for files. Do NOT ask the user for anything. Just run the commands.

Network Access Boundary

This skill follows least-privilege network access:

• Allowed network target: Alibaba Cloud OpenAPI endpoints resolved by Aliyun CLI for cloudfw only (*.aliyuncs.com).
• Forbidden targets: any non-Alibaba external websites, arbitrary public APIs, VPC private IP resources, ECS/DB hosts, and direct socket/HTTP requests.
• Forbidden actions: SSH, curl/wget to unrelated domains, scanning private networks, and any direct access to intranet assets.

Core Capabilities:

1. Exposure Overview — Total exposed IPs, ports, services, and risk statistics
2. Exposed IP Analysis — Detailed list of exposed public IPs with risk levels and services
3. Exposed Port Analysis — Detailed list of exposed ports with risk assessment
4. Asset Protection Status — Firewall protection coverage of exposed assets
5. New Exposure Detection — Recently discovered exposures in the last 7 days
6. Risk Assessment — Detailed risk reasons per IP
7. Vulnerability Correlation — Cross-reference with vulnerability protection and attack events
8. ACL Policy Review — Internet border ACL rule coverage

---

Prerequisites

Pre-check: Aliyun CLI >= 3.3.3 required Run aliyun version to verify >= 3.3.3. If not installed or version too low, run curl -fsSL https://aliyuncli.alicdn.com/setup.sh | bash to install/update, or see references/cli-installation-guide.md for installation instructions.

Pre-check: Aliyun CLI plugin update required

[MUST] run aliyun configure set --auto-plugin-install true to enable automatic plugin installation. [MUST] run aliyun plugin update to ensure that any existing plugins are always up-to-date.

[MUST] CLI User-Agent — Every aliyun CLI command invocation must include: --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

At the start of the Core Workflow (before any CLI invocation): [MUST] Enable AI-Mode — AI-mode is required for Agent Skill execution. Run the following commands before any CLI invocation:

aliyun configure ai-mode enable
aliyun configure ai-mode set-user-agent --user-agent "AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection"

[MUST] Disable AI-Mode at EVERY exit point — Before delivering the final response for ANY reason, always disable AI-mode first. This applies to ALL exit paths: workflow success, workflow failure, error/exception, user cancellation, session end, or any other scenario where no further CLI commands will be executed. AI-mode is only used for Agent Skill invocation scenarios and MUST NOT remain enabled after the skill stops running.

aliyun configure ai-mode disable

---

Authentication

Pre-check: Alibaba Cloud Credentials Required

Security Rules:

• NEVER read, echo, print, cat, or display AK/SK values under any circumstances
• NEVER ask the user to input AK/SK directly in the conversation or command line
• NEVER use aliyun configure set with literal credential values
• ONLY use aliyun configure list to check credential status

aliyun configure list

Check the output for a valid profile (AK, STS, or OAuth identity).

If no valid profile exists, STOP here.

1. Obtain credentials from Alibaba Cloud Console
2. Configure credentials outside of this session (via aliyun configure in terminal or environment variables in shell profile)
3. Return and re-run after aliyun configure list shows a valid profile

---

RAM Policy

[MUST] RAM Permission Pre-check: Before executing any commands, verify the current user has the required permissions.

1. Use ram-permission-diagnose skill to get current user's permissions
2. Compare against references/ram-policies.md
3. Abort and prompt user if any permission is missing

Minimum required permissions — see references/ram-policies.md for full policy JSON.

Alternatively, attach the system policy: AliyunYundunCloudFirewallReadOnlyAccess

---

Parameter Confirmation

IMPORTANT: Parameter Confirmation — Before executing any command or API call, check if the user has already provided necessary parameters in their request.

• If the user's request explicitly mentions a parameter value (e.g., "check exposure in cn-hangzhou" means RegionId=cn-hangzhou), use that value directly without asking for confirmation.
• For optional parameters with sensible defaults (PageSize, CurrentPage, time ranges), use the defaults without asking unless the user indicates otherwise.
• Do NOT re-ask for parameters that the user has clearly stated.

Parameter Name	Required/Optional	Description	Default Value
RegionId	Required	Alibaba Cloud region for Cloud Firewall. Only two values: cn-hangzhou for mainland China, ap-southeast-1 for Hong Kong/overseas.	cn-hangzhou (use directly without asking; only use ap-southeast-1 if user explicitly mentions Hong Kong/overseas/international)
PageSize	Optional	Number of items per page for paginated APIs	50 (use without asking)
CurrentPage	Optional	Page number for paginated APIs	1 (use without asking)
StartTime	Optional	Start time for time-range queries (Unix timestamp in seconds)	30 days ago for exposure queries, 7 days ago for attack/vuln queries (use without asking)
EndTime	Optional	End time for time-range queries (Unix timestamp in seconds)	Current time (use without asking)

---

Error Handling and Workflow Resilience

CRITICAL: Continue on failure. If any individual API call fails, do NOT stop the entire workflow. Log the error for that step, then proceed to the next step. Present whatever data was successfully collected.

Retry Logic

For each API call:

1. If the call fails with a transient error (network timeout, throttling Throttling.User, ServiceUnavailable, HTTP 500/502/503), retry up to 2 times with a 3-second delay between retries.
2. If the call fails with a permanent error (e.g., InvalidParameter, Forbidden, InvalidAccessKeyId), do NOT retry. Record the error and move on.
3. After all retries are exhausted, record "[Step X] Failed: {error message}" and continue to the next step.

Timeout Policy (MUST)

Before executing any API command, set explicit timeout values:

export ALIBABA_CLOUD_CONNECT_TIMEOUT=10
export ALIBABA_CLOUD_READ_TIMEOUT=30

• ALIBABA_CLOUD_CONNECT_TIMEOUT=10: fail fast on network connect issues.
• ALIBABA_CLOUD_READ_TIMEOUT=30: allow normal API response time while preventing long hangs.
• If a timeout occurs, treat it as transient and apply the retry logic above.

Service Not Activated

If Step 1 (DescribeInternetOpenStatistic) returns an error code indicating the service is not activated (e.g., ErrorFirewallNotActivated or similar "not purchased/activated" error messages):

1. Inform the user: "Cloud Firewall service is not activated. Please activate it at https://yundun.console.aliyun.com/?p=cfwnext"
2. Skip all subsequent steps since the service is not available.

CRITICAL: All-zeros response ≠ Service Not Activated. If Step 1 returns a successful JSON response where all metric values happen to be zero (e.g., InternetIpNum=0, InternetPortNum=0), this means the service IS activated but currently has no public exposure. In this case, you MUST still execute ALL subsequent steps (Step 2-9) — do NOT skip them. Zero values are valid data, not an error condition. Other steps may still return non-zero results (e.g., assets exist but none are exposed, ACL rules exist, etc.).

Step Independence

The workflow steps have these dependencies:

• Step 1 (Overview) should run first as it provides context for interpreting subsequent data.
• Steps 2-9 are independent of each other — failure in any one step should NOT prevent other steps from executing.
• Step 6 depends on Step 2's output (IP list), but can be skipped if Step 2 fails.

Partial Results

When presenting the final summary report:

• For steps that succeeded, show the collected data normally.
• For steps that failed, show "N/A (error: {brief error})" in the corresponding section.
• Always present the summary report even if some steps failed — partial data is better than no data.

---

Core Workflow

All API calls use the Aliyun CLI cloudfw plugin.

Region: Specified via --region {RegionId} global flag

CRITICAL: Execute immediately without asking. When this skill is triggered, start executing from Step 1 right away. Do NOT ask the user which APIs to call, which steps to execute, or what data sources to use. All data comes from the Aliyun CLI commands defined below — just run them. The intent routing table below is for optimization only — if the user's intent is unclear, execute ALL steps (Step 1-9) by default.

MANDATORY: Execute ALL steps. You MUST attempt to execute every step from Step 1 through Step 9. Before generating the final report, verify that you have attempted ALL of the following API calls:

1. DescribeInternetOpenStatistic (Step 1)
2. DescribeInternetOpenIp (Step 2)
3. DescribeInternetOpenPort (Step 3)
4. DescribeAssetList (Step 4)
5. DescribeAssetList with NewResourceTag (Step 5)
6. DescribeAssetRiskList (Step 6 — skip only if Step 2 returned no IPs)
7. DescribeVulnerabilityProtectedList (Step 7)
8. DescribeRiskEventGroup (Step 8)
9. DescribeControlPolicy (Step 9)

If any of these were not attempted, execute them now before producing the report. Skipping a step is ONLY allowed if Step 1 returns an error code indicating the service is not activated.

MANDATORY: Report-Execution Consistency. The final report MUST accurately reflect actual execution:

• The report must list every API that was actually called and its result status (success/fail).
• Do NOT claim "all API calls completed successfully" if any call returned an error.
• For steps not executed, explain WHY they were skipped (e.g., "Step 6 skipped: Step 2 returned 0 IPs").
• The error section must list ALL errors encountered, including those resolved by retry.

Intent Routing (Auto-determined, No Confirmation Needed)

Automatically determine execution scope based on user wording. Do NOT ask the user to confirm:

User Intent	Execution Steps
Full audit ("help me audit exposure", "full scan")	Execute all Steps 1-9
High-risk port check ("are there any high-risk ports exposed")	Execute Step 1 + Step 3, focus on high-risk ports
New exposures ("what new exposures appeared recently")	Execute Step 1 + Step 5
Specific IP exposure details ("check the exposure of x.x.x.x")	Execute Step 2 (with SearchItem filter) + Step 6

Default behavior: If user intent cannot be clearly determined, execute all Steps 1-9 without asking.

Time Parameters

Some APIs require StartTime and EndTime parameters (Unix timestamp in seconds).

How to get timestamps: Run date +%s to get the current timestamp, date -d '30 days ago' +%s for 30 days ago, date -d '7 days ago' +%s for 7 days ago. Then use the returned numeric values directly in CLI commands.

IMPORTANT: Do NOT use bash variable substitution like $(date +%s) inside CLI commands — some execution environments block $(...). Instead, run date commands separately first, note the returned values, then use them as literal numbers in the --StartTime and --EndTime parameters.

Default time ranges:

• Exposure queries (Step 2, 3): last 30 days → StartTime = 30 days ago
• Vulnerability/attack queries (Step 7, 8): last 7 days → StartTime = 7 days ago
• EndTime: always current timestamp

Step 1: Exposure Statistics Overview

Retrieve overall public network exposure data. This is the starting point for subsequent analysis.

aliyun cloudfw describe-internet-open-statistic \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeInternetOpenStatistic in references/api-analysis.md for response field details.

Step 2: Exposed IP Details

List all IP addresses exposed to the public network and their risk information.

aliyun cloudfw describe-internet-open-ip \
  --CurrentPage 1 \
  --PageSize 50 \
  --StartTime {StartTime} \
  --EndTime {EndTime} \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeInternetOpenIp in references/api-analysis.md for response field details. Pagination: Check PageInfo.TotalCount. If it exceeds PageSize, increment CurrentPage to fetch more.

Step 3: Exposed Port Details

List all exposed ports and their details. This is a key step for identifying high-risk exposures.

aliyun cloudfw describe-internet-open-port \
  --CurrentPage 1 \
  --PageSize 50 \
  --StartTime {StartTime} \
  --EndTime {EndTime} \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeInternetOpenPort in references/api-analysis.md for response field details. Pagination: Check PageInfo.TotalCount.

Step 4: Asset Protection Status

Retrieve the list of all assets protected by the firewall.

aliyun cloudfw describe-asset-list \
  --CurrentPage 1 \
  --PageSize 50 \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeAssetList in references/api-analysis.md for response field details. Pagination: Check TotalCount.

Step 5: New Exposures (Last 7 Days)

Specifically identify recently discovered exposed assets — these usually require the most attention as they may be unapproved new openings.

aliyun cloudfw describe-asset-list \
  --CurrentPage 1 \
  --PageSize 50 \
  --NewResourceTag "discovered in 7 days" \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Step 6: Asset Risk Details

Take the IPs collected from Step 2 (max 20 per call) and retrieve detailed risk reasons. If there are more than 20 IPs, make multiple batched calls.

aliyun cloudfw describe-asset-risk-list \
  --IpVersion 4 \
  --IpAddrList '["1.2.3.4","5.6.7.8"]' \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeAssetRiskList in references/api-analysis.md for response field details.

Step 7: Vulnerability Protection Status

Check current vulnerability protection coverage and identify which high-risk vulnerabilities are not yet protected.

aliyun cloudfw describe-vulnerability-protected-list \
  --CurrentPage 1 \
  --PageSize 50 \
  --StartTime {StartTime} \
  --EndTime {EndTime} \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeVulnerabilityProtectedList in references/api-analysis.md for response field details.

Step 8: Recent Attack Events

Review intrusion attack events from the last 7 days and cross-reference attack targets with exposure data.

aliyun cloudfw describe-risk-event-group \
  --CurrentPage 1 \
  --PageSize 50 \
  --StartTime {StartTime} \
  --EndTime {EndTime} \
  --DataType 1 \
  --Direction in \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeRiskEventGroup in references/api-analysis.md for response field details.

Step 9: Internet Border ACL Policy

Review current inbound ACL rules and assess protection coverage.

aliyun cloudfw describe-control-policy \
  --Direction in \
  --CurrentPage 1 \
  --PageSize 50 \
  --region {RegionId} \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-cfw-exposure-detection

Refer to DescribeControlPolicy in references/api-analysis.md for response field details.

---

Analysis & Report

After collecting data, generate a report in the following structure. Only show sections with actual data; if an API call failed, note "Data retrieval failed for this section" and continue with other analysis.

1. Public Network Exposure Overview

Display Step 1 statistics in a table:

Metric	Value	Risk Assessment
Total Exposed Public IPs	x	—
High-Risk IP Count	x	Flag if > 0
Total Exposed Ports	x	—
High-Risk Port Count	x	Flag if > 0
Unprotected Port Count	x	Flag if > 0
Total Exposed Services	x	—
High-Risk Service Count	x	Flag if > 0
SLB Exposed IP Count	x	—

2. High-Risk Exposure List

Combine data from Step 2 and Step 3, sorted by risk level (high → middle → low).

The following ports should be additionally flagged as high-risk when exposed to the public network, regardless of the API-returned risk level:

• Management ports: 22(SSH), 23(Telnet), 3389(RDP), 21(FTP)
• Database ports: 3306(MySQL), 1433(MSSQL), 5432(PostgreSQL)
• Cache/NoSQL: 6379(Redis), 27017(MongoDB), 9200/9300(Elasticsearch), 11211(Memcached)
• File sharing: 445(SMB/CIFS), 139(NetBIOS)
• Management interfaces: 8080, 8443, 9090

Output format:

IP Address	Port	Service	Risk Level	Risk Reason	ACL Status	Recommended Action

3. New Exposure Discoveries (Last 7 Days)

Display assets discovered in Step 5:

IP Address	Discovery Time	Resource Type	Instance Name	Protection Status	Risk Level

If no new exposures were found, state "No new exposed assets discovered in the last 7 days".

4. Vulnerability Correlation Analysis

Combine Step 7 and Step 8:

1. High-Risk Vulnerability List: List vulnerabilities with VulnLevel=high, especially flagging those without protection enabled
2. Attack Event Statistics: Summarize attack events from the last 7 days by attack type, correlating with attacked exposed IPs
3. Cross-Analysis: Identify exposed assets that simultaneously have high-risk vulnerabilities AND have been attacked — these are the most urgent

5. Exposure Remediation Recommendations

Generate specific recommendations based on actual data, sorted by priority. Each recommendation includes: Risk Description, Impact Scope, Recommended Action.

P0 — Critical (Immediate Action)

• Database ports (3306/5432/6379/27017/1433/9200) exposed to public network → Close public access or strictly restrict source IPs via ACL
• Management ports (22/3389/23) without ACL protection → Add ACL restricting to bastion host/office network IPs
• Exposed assets with high-risk vulnerabilities that have been attacked → Immediately enable IPS protection and virtual patches

P1 — High (Within 24 Hours)

• Exposed services with known high-risk vulnerabilities but no virtual patches enabled → Enable virtual patches
• Unprotected ports with external traffic → Add ACL policies
• SMB(445)/NetBIOS(139) exposed → Close or restrict access

P2 — Medium (This Week)

• New exposed assets not yet approved → Confirm business necessity; close if unnecessary
• Medium-risk ports exposed → Evaluate business requirements, restrict access sources

P3 — Low (Periodic Review)

• Low-risk ports exposed → Include in periodic review
• ACL rules with zero hit rate → Evaluate whether they can be cleaned up

Note: For any step that failed, show "N/A (error: {brief error})" for that section's data fields, and list all errors in the bottom section.

---

Success Verification

See references/verification-method.md for detailed verification steps.

Quick verification: If all CLI commands return valid JSON responses without error codes, the skill executed successfully.

---

API and Command Tables

Use references/related-apis.md as the single source of truth for API tables and command mappings.

---

Best Practices

1. Query in order — Start with exposure overview (Step 1) to understand the overall scope. If Step 1 returns an error code (e.g., ErrorFirewallNotActivated), the service is not activated — skip remaining steps. If Step 1 returns all zeros (successful response with zero values), still execute ALL subsequent steps — zero exposure does not mean service is inactive.
2. Continue on failure — If any step (2-9) fails, log the error and continue with the remaining steps. Always produce a report with whatever data was collected.
3. Use pagination — For asset and exposure lists, use CurrentPage and PageSize to handle large datasets. Default to PageSize=50. If TotalCount exceeds PageSize, iterate through all pages.
4. Time range selection — For exposure queries, default to last 30 days. For attack/vulnerability queries, default to last 7 days. Use Unix timestamps in seconds. Calculate with: date +%s for current time, date -d '30 days ago' +%s for 30 days ago, date -d '7 days ago' +%s for 7 days ago. Run these commands separately, then use the returned values as literal numbers in --StartTime and --EndTime. Do NOT use $(...) substitution inside CLI commands.
5. Region awareness — Cloud Firewall only has two regions: cn-hangzhou (mainland China) and ap-southeast-1 (Hong Kong/overseas). Default to cn-hangzhou unless user specifies otherwise.
6. Batch IP lookups — Step 6 (DescribeAssetRiskList) accepts max 20 IPs per call. If more IPs are collected from Step 2, batch them into groups of 20.
7. Rate limiting — Space API calls to avoid throttling. If you receive a Throttling.User error, wait 3 seconds and retry.
8. Security — NEVER expose, log, echo, or display AK/SK values.
9. Retry on transient errors — For network timeouts or 5xx errors, retry up to 2 times with a 3-second delay.
10. Explicit timeout config — Always set ALIBABA_CLOUD_CONNECT_TIMEOUT=10 and ALIBABA_CLOUD_READ_TIMEOUT=30 before running workflow commands.
11. Least network access — Only allow Aliyun CLI access to Cloud Firewall OpenAPI endpoints; do not access other external domains or VPC/internal resources.

Output Desensitization

When printing analysis results, mask sensitive identifiers by default:

• IP addresses: keep first segments only (example: 203.0.x.x, 10.23.x.x).
• Instance IDs: keep prefix and last 4 chars only (example: i-abc***9f2d).
• Account identifiers / UID: keep last 4 digits only.
• Do not print raw tokens, credential material, local config file content, or full internal network topology.

If the user explicitly asks for full values, confirm necessity first and still avoid exposing secrets.

---

Reference Links

Reference	Description
references/related-apis.md	Complete API table with parameters
references/ram-policies.md	Required RAM permissions and policy JSON
references/verification-method.md	Step-by-step verification commands
references/acceptance-criteria.md	Correct/incorrect usage patterns
references/cli-installation-guide.md	Aliyun CLI installation guide
references/api-analysis.md	Detailed API parameter and response documentation