sim-setup

name	sim-setup
description	Set up Virtuoso simulation with Ocean SKILL. Use when configuring simulator, design target, model files, or design variables before running simulation.
allowed-tools	Bash(*/virtuoso *)

Simulation Setup

Configure Ocean environment for circuit simulation via virtuoso-cli.

Steps

1. Set simulator and design

virtuoso sim setup --lib <LIB> --cell <CELL> --view <VIEW> --format json

View defaults to schematic. Check available views first if setup returns nil:

virtuoso skill exec 'let((cell) cell=ddGetObj("LIB" "CELL") foreach(mapcar v cell~>views v~>name))' --format json

2. Set model files (if not already configured in ADE)

virtuoso skill exec 'modelFile(list("/path/to/models.lib" "tt") list("/path/to/models.lib" "res_tt"))' --format json

Critical: Do NOT include entries with empty section names "" for .lib files — spectre will fail with SFE-675. Only .ckt files can have empty sections.

3. Set design variables

virtuoso skill exec 'desVar("L" 130e-9)' --format json
virtuoso skill exec 'desVar("VGS" 0.6)' --format json

Check required variables by looking at spectre.out errors — they list undefined parameters.

4. Set results directory

virtuoso skill exec 'resultsDir("/tmp/my_sim_results")' --format json

Critical workflow

The correct order for a fresh simulation is:

# 1. Setup simulator and design
virtuoso sim setup --lib LIB --cell CELL

# 2. Set resultsDir BEFORE anything else
virtuoso skill exec 'resultsDir("/tmp/my_sim")' --format json

# 3. Set modelFile with CORRECT absolute paths (verify files exist!)
virtuoso skill exec 'modelFile(list("/path/to/model.lib" "tt") list("/path/to/model.lib" "res_tt"))' --format json

# 4. Set design variables
virtuoso skill exec 'desVar("L" 130e-9)' --format json

# 5. Run
virtuoso sim run --analysis dc --param saveOppoint=t --timeout 120

# 6. Measure
virtuoso sim measure --analysis dcOp --expr 'value(getData("/NM0:gm" ?result "dcOpInfo"))'

Known issues

• simulator('spectre) resets modelFile — always re-set modelFile after sim setup
• Ocean functions don't work inside let blocks — call simulator(), design(), analysis(), run() at top level
• Ocean state persists across CLI calls — no need to re-setup between runs, but modelFile must be set each session
• design() returns nil: the cell may not have the view you specified — check with v~>name
• run() takes <0.3s and no spectre.out: modelFile not set or paths wrong — spectre silently fails
• run() takes >1s with spectre.out: real execution happened — check spectre.out for errors
• Netlisting error OSSHNL-116: a subcell has no spectre/schematic view (e.g., notes cell)
• Model path errors: verify paths exist on disk — PDK symlinks can break (use direct path, not through oa/)