recommend-plane-mappings

name	recommend-plane-mappings
description	Recommends net -> plane-layer assignments for a KiCad PCB with signal-integrity rationale. Reads the stackup, identifies plane-worthy nets (GND plus power rails by pad count and current), and assigns copper layers (GND adjacency for return paths, GND/VCC pairing for interplane capacitance, split layers for multiple rails). Use before creating planes on the Planes tab or with route_planes.py.

Recommend Plane Mappings

When this skill is invoked with a KiCad PCB file, recommend which nets should get copper planes and on which layers, with the reasoning a layout engineer would apply.

Step 1: Read the Board

from kicad_parser import parse_kicad_pcb
pcb = parse_kicad_pcb('path/to/file.kicad_pcb')

print(pcb.board_info.copper_layers)                # e.g. ['F.Cu', 'In1.Cu', 'In2.Cu', 'B.Cu']
for layer in pcb.board_info.stackup:               # List[StackupLayer], ordered top to bottom
    print(layer.name, layer.layer_type, layer.thickness, layer.epsilon_r)

# Existing zones - don't silently duplicate them
for zone in pcb.zones:
    print(zone.net_name if hasattr(zone, 'net_name') else zone, getattr(zone, 'layer', '?'))

Report the layer count up front. On a 2-layer board there are no inner layers to give away: recommend a pour on B.Cu (and/or F.Cu) for GND, note the compromise, and suggest /recommend-stackup if the board's signal content justifies 4 layers.

Step 2: Identify Plane-Worthy Nets

Use pad counts plus the /analyze-power-nets approach (datasheet lookup for supply pins and current estimates) rather than name matching alone:

python3 -X utf8 list_nets.py path/to/file.kicad_pcb --power

• GND (or the dominant ground net): always plane-worthy.
• Power rails: plane-worthy when pad count is high or estimated current is large; a rail feeding a handful of pins is better served by wide traces (--power-nets / --power-nets-widths) - say so instead of forcing a plane.
• Multiple low-current rails can share one split layer when their regions don't interleave; flag the split seams as return-path hazards for any signals that cross them.

Step 3: Assign Layers with SI Rationale

• Put GND adjacent to the primary signal layers (return paths for outer-layer routing; on 4-layer boards: signals on F.Cu -> GND on In1.Cu).
• Pair a power plane against GND where the stackup allows (interplane capacitance; e.g. VCC on In2.Cu against GND on In1.Cu).
• High-speed content raises the stakes: reference-plane adjacency for the layers carrying fast signals comes first, rail convenience second.
• Mention existing zones that already cover a recommendation instead of repeating them.

Step 4: Report and Machine-Readable Result

Present the recommended mappings as a table (net(s), layer, rationale), note any nets deliberately left to wide traces, and flag stackup problems.

End the reply with exactly one line:

RESULT=GND:In1.Cu;VCC|+3V3:In2.Cu

• Assignment groups separated by ;
• Nets within a group joined by | (they share the layer)
• One copper layer per group, after the final : - a net needing planes on two layers appears in two groups
• Use exact net names as they appear on the board (including any / prefix)

This line maps 1:1 onto the Planes tab's assignment list and route_planes.py --nets ... --plane-layers ... arguments.