Systematic workflow for decomposing a monolithic application into microservices using the strangler fig pattern. Covers domain analysis, service extraction, inter-service communication, data ownership migration, deployment strategies, and the organizational changes needed to support a distributed architecture.
Use when the user wants to migrate monolith to microservices or needs a structured multi-step process for this goal.
Do NOT use when the request is a single-step task or requires professional advice beyond educational guidance.
Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.
Um comando direto ignora o prompt de revisão. Verifique a origem antes de executá-lo.
Instruções da origem · Visualização somente leitura
name
migrate-monolith-to-microservices
description
Systematic workflow for decomposing a monolithic application into microservices using the strangler fig pattern. Covers domain analysis, service extraction, inter-service communication, data ownership migration, deployment strategies, and the organizational changes needed to support a distributed architecture.
Use when the user wants to migrate monolith to microservices or needs a structured multi-step process for this goal.
Do NOT use when the request is a single-step task or requires professional advice beyond educational guidance.
Migrating from a monolith to microservices is one of the highest-risk, highest-reward architectural transformations a team can undertake. Done well, it unlocks independent deployability, team autonomy, and technology flexibility. Done poorly, it creates a "distributed monolith" that is harder to operate than what you started with.
This workflow uses the strangler fig pattern: rather than a risky big-bang rewrite, you incrementally extract services from the monolith, routing traffic through a facade. Each extraction follows a disciplined sequence of domain analysis, boundary definition, data migration, service implementation, and cutover. The monolith shrinks over time until only the facade remains.
When to Use
User wants to migrate monolith to microservices
User needs a structured, step-by-step process for migrate monolith to microservices
User wants to break up my monolith
I need to migrate to microservices
How do I extract services from my monolith
Do NOT use when: the request is outside the scope of migrate monolith to microservices or requires professional advice beyond educational guidance
Do NOT use for single-step tasks that one atomic skill can handle independently
Prerequisites
Before starting this workflow, ensure:
A running monolithic application with production traffic
Access to application source code and database schemas
Monitoring and logging infrastructure (or willingness to build it first)
Team alignment on the motivation for migration (scalability, team autonomy, deployment speed)
Executive sponsorship -- this is a multi-month investment
At least one team member with distributed systems experience
Steps
Step 1: Assess the Monolith and Identify Domains (uses: domain-driven-designer)
run event storming sessions with domain experts. Map bounded contexts by analyzing code dependencies, database table relationships, and team ownership boundaries. Use the Tech Debt Analyzer skill to identify areas of high coupling and technical debt that will complicate extraction. Produce a domain map showing potential service boundaries.
Input: Application source code and architecture diagrams, Database schema and entity relationships, Business domain knowledge from product and engineering teams
Output: Bounded context map with domain boundaries, Event storming results (commands, events, aggregates), Dependency graph (code-level and data-level)
Key focus: Use the Domain-Driven Designer skill to run event storming sessions with domain experts
Step 2: Define the Migration Strategy and Sequence (uses: microservices-architect)
prioritize which bounded contexts to extract first. Apply the strangler fig pattern: start with a low-risk, high-value domain that has clear boundaries and minimal data sharing. Define the facade layer (API gateway or reverse proxy) that will route traffic between the monolith and new services. Create a migration roadmap with phases, each extracting one service.
Input: Bounded context map from Step 1, Business priorities (which domains change most frequently), Risk tolerance and deployment maturity
Output: Prioritized extraction sequence with rationale, Strangler fig facade architecture design, Migration roadmap with phases and milestones
Key focus: Use the Microservices Architect skill to prioritize which bounded contexts to extract first
Step 3: Design Inter-Service Communication (uses: api-designer)
define synchronous APIs between services (REST or gRPC). Use the Event-Driven Architect skill to design asynchronous communication for eventual consistency scenarios. Define event schemas, choose a message broker, and establish contracts. Design for failure: every synchronous call must have timeout, retry, and circuit breaker patterns.
Input: Service boundary definitions from Steps 1-2, Synchronous vs asynchronous communication needs, Consistency requirements between services
Output: API contracts (OpenAPI specs) for synchronous communication, Event schemas and topic/queue definitions, Communication pattern decision matrix (sync vs async per interaction)
Key focus: Use the API Designer skill to define synchronous APIs between services (REST or gRPC)
Step 4: Extract the First Service (uses: microservices-architect)
implement the strangler fig extraction. First, create the new service alongside the monolith. Implement the service's API and business logic. Use the Database Architect skill to design the data migration: start with the "database per service" goal but use a transitional pattern (shared database with schema separation, or CDC-based sync) during migration. Route traffic through the facade, starting with read operations, then writes.
Input: First service candidate from Step 2, Database tables owned by this domain, API contracts from Step 3
Output: New service codebase with API implementation, Database migration scripts (schema and data), Facade routing configuration
Key focus: Use the Microservices Architect skill to implement the strangler fig extraction
Step 5: Set Up Deployment Infrastructure (uses: docker-engineer)
containerize the extracted service with production-ready Dockerfiles (multi-stage builds, non-root users, health checks). Use the Kubernetes Operator skill to define deployment manifests (or Helm charts) with proper resource limits, readiness probes, and horizontal pod autoscaling. Use the CI/CD Architect skill to create independent deployment pipelines so the new service can be deployed without touching the monolith.
Input: New service from Step 4, Existing deployment infrastructure, Team's container and orchestration experience
Output: Dockerfile with multi-stage build, Kubernetes manifests or Helm chart, CI/CD pipeline for independent service deployment
Key focus: Use the Docker Engineer skill to containerize the extracted service with production-ready Dockerfiles (multi-stage builds, non-root users, health checks)
instrument the service with the three pillars of observability: metrics (latency, error rate, throughput), structured logs with correlation IDs, and distributed traces that span the monolith-to-service boundary. Set up dashboards and alerts. This is critical -- you cannot safely operate microservices without observability.
Input: Deployed service from Step 5, SLIs/SLOs for the service, Existing monitoring stack
Output: Service metrics dashboard (latency p50/p95/p99, error rate, throughput), Distributed tracing configuration (correlation IDs across service boundary), Structured logging with consistent format
Key focus: Use the Monitoring Engineer skill to instrument the service with the three pillars of observability: metrics (latency, error rate, throughput), structured logs with correlation IDs, and distributed traces that span the monolith-to-service boundary
Step 7: Validate with Contract Tests (uses: contract-tester)
implement consumer-driven contract tests that verify the service meets its API contracts. Use the Resilience Engineer skill to test failure scenarios: what happens when the service is down, slow, or returning errors? Verify the facade correctly falls back to the monolith during failures.
Input: API contracts from Step 3, Deployed service from Step 5, Known failure modes
Output: Contract test suite (Pact or similar), Resilience test scenarios and results, Fallback behavior documentation
Key focus: Use the Contract Tester skill to implement consumer-driven contract tests that verify the service meets its API contracts
Step 8: Cut Over and Decommission Monolith Code (uses: microservices-architect)
Execute the full cutover: route all traffic (reads and writes) for the extracted domain through the new service. Monitor closely for the first 48 hours. Once stable, remove the extracted domain's code from the monolith and clean up the shared database tables. This is the "fig" completing its strangling of that branch. Document lessons learned and apply them to the next extraction.
Input: Validated service from Steps 6-7, Production traffic patterns, Stakeholder approval for cutover
Output: Cutover runbook with step-by-step procedures, Rollback procedure tested in staging, Monolith code removal commit
Key focus: Execute the full cutover: route all traffic (reads and writes) for the extracted domain through the new service
Step 9: Iterate for Remaining Services (uses: microservices-architect)
Repeat Steps 3-8 for each subsequent service extraction. Each iteration should be faster as the team builds muscle memory and reusable infrastructure (Helm chart templates, CI/CD pipelines, observability patterns). Revisit the extraction sequence periodically -- priorities may shift as you learn more about the domain boundaries.
Input: Lessons learned from first extraction, Updated migration roadmap, Next service candidate from Step 2
Output: Updated migration roadmap reflecting progress, Reusable templates for service extraction, Cross-service integration test suite
Key focus: Repeat Steps 3-8 for each subsequent service extraction
Decision Points
After Step ?:
If After Step 1: Invest more time in domain analysis; consider module boundaries within the monolith instead
If After Step 4: Debug discrepancies; do not proceed with data inconsistencies
If After Step 7: Fix failures; do not cut over with known issues
If After Step 8: Investigate instability before extracting more services
Failure Handling
Extracting too many services too fast: -- Start with one, prove the pattern, then accelerate. Premature parallelization creates chaos.
Ignoring data ownership: -- Shared databases between services create distributed monoliths. Each service must own its data, even if that means eventual consistency.
No strangler fig facade: -- Big-bang cutovers are high-risk. The facade lets you incrementally shift traffic and roll back safely.
Skipping observability: -- You cannot debug distributed systems with printf. Invest in tracing, metrics, and logs before cutting over.
Nano-services: -- Not everything needs to be its own service. If two domains always change together and are owned by the same team, keep them together.
Expected Outcome
When this workflow is complete, the user will have:
Each extracted service can be deployed independently in under 15 minutes
Inter-service latency stays within defined SLOs (typically < 50ms p99 for sync calls)
Team deployment frequency increases measurably after extraction
No data loss or consistency issues during any extraction
Monolith codebase shrinks measurably with each extraction phase
Teams can develop and deploy their services without coordinating with other teams
Output Format
MIGRATE MONOLITH TO MICROSERVICES TRACKER
========================================
[ ] Step 1: Assess the Monolith and Identify Domains
Status: [pending/in-progress/complete]
[ ] Step 2: Define the Migration Strategy and Sequence
Status: [pending/in-progress/complete]
[ ] Step 3: Design Inter-Service Communication
Status: [pending/in-progress/complete]
[ ] Step 4: Extract the First Service
Status: [pending/in-progress/complete]
[ ] Step 5: Set Up Deployment Infrastructure
Status: [pending/in-progress/complete]
[ ] Step 6: Implement Observability
Status: [pending/in-progress/complete]
[ ] Step 7: Validate with Contract Tests
Status: [pending/in-progress/complete]
[ ] Step 8: Cut Over and Decommission Monolith Code
Status: [pending/in-progress/complete]
[ ] Step 9: Iterate for Remaining Services
Status: [pending/in-progress/complete]
Timeline: ______ weeks
Overall Status: [IN PROGRESS / COMPLETE]
Adaptation notes:
Adjust timeline based on user's availability and prior experience
Steps may be reordered if dependencies allow parallel execution
Skip optional steps if time or budget is constrained
Edge Cases
Extracting too many services too fast: -- Start with one, prove the pattern, then accelerate. Premature parallelization creates chaos.
Ignoring data ownership: -- Shared databases between services create distributed monoliths. Each service must own its data, even if that means eventual consistency.
No strangler fig facade: -- Big-bang cutovers are high-risk. The facade lets you incrementally shift traffic and roll back safely.
Skipping observability: -- You cannot debug distributed systems with printf. Invest in tracing, metrics, and logs before cutting over.
Example
Input: "I want to migrate monolith to microservices and need a structured plan to follow step by step."
Output:
Step 1 (domain-driven-designer-tech-debt-analyzer): Assess the Monolith and Identify Domains -- produces concrete deliverables for this phase.
Step 2 (microservices-architect): Define the Migration Strategy and Sequence -- produces concrete deliverables for this phase.
Step 3 (api-designer-event-driven-architect): Design Inter-Service Communication -- produces concrete deliverables for this phase.
Step 4 (microservices-architect-database-architect): Extract the First Service -- produces concrete deliverables for this phase.
Step 5 (docker-engineer-kubernetes-operator-cicd-architect): Set Up Deployment Infrastructure -- produces concrete deliverables for this phase.
Step 6 (monitoring-engineer): Implement Observability -- produces concrete deliverables for this phase.
Step 7 (contract-tester-resilience-engineer): Validate with Contract Tests -- produces concrete deliverables for this phase.
Step 8 (microservices-architect): Cut Over and Decommission Monolith Code -- produces concrete deliverables for this phase.
Step 9 (microservices-architect-domain-driven-designer): Iterate for Remaining Services -- produces concrete deliverables for this phase.
Result: User has a complete migrate monolith to microservices plan with all deliverables produced, validated, and ready for implementation.
