Run the upstream Flux controller patch release procedure for helm-controller, image-automation-controller, image-reflector-controller, kustomize-controller, notification-controller, source-controller, and source-watcher. Use when preparing a new controller patch release from a release series branch, drafting changelog entries, tagging releases, and opening the follow-up changelog PRs back to main.
Instalação
Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.
Run the upstream Flux controller patch release procedure for helm-controller, image-automation-controller, image-reflector-controller, kustomize-controller, notification-controller, source-controller, and source-watcher. Use when preparing a new controller patch release from a release series branch, drafting changelog entries, tagging releases, and opening the follow-up changelog PRs back to main.
license
Apache-2.0
Flux Controller Patch Releases
Use this skill for upstream Flux controller patch releases only. Do not use it
for flux2, pkg, or other non-controller repos.
Supported controllers:
helm-controller
image-automation-controller
image-reflector-controller
kustomize-controller
notification-controller
source-controller
source-watcher
Important rules
Go deep until you block, then switch. Drive one controller all the way
through every step you can do locally — branch, changelog commit, version
bump commit, push, open PR — before switching to the next. Only move on
when you hit something you cannot progress (CI running, PR awaiting review,
tag workflow running). The moment something unblocks (PR merged, CI green,
workflow finished), come back to it immediately — do not finish the current
controller's local work first if an earlier one is ready to advance.
Never block the conversation on long-running operations. CI checks,
release workflow runs, tag-triggered workflows, and similar waits must be
watched in the background so the user can keep steering and so you can pick
up any other controller the moment it unblocks. When a background watch
completes, report the result and proceed.
Always quote PR/issue links as full URLs (e.g.
https://github.com/fluxcd/helm-controller/pull/1465), never the
<owner>/<repo>#<number> shorthand — full URLs are clickable from the
user's terminal, the shorthand is not.
Start background watches on every PR immediately after opening it. Kick
off gh pr checks <num> -R fluxcd/<repo> --watch in the background as
soon as the PR is created so CI status lands in the conversation the
moment it finishes. Do the same for tag-triggered release workflows
(gh run watch <id> -R fluxcd/<repo> in the background). Do not wait
until "everything is pushed" to start watching — start watching the first
PR while you prepare the second.
Also start a background approval watch per PR.gh pr checks --watch
only covers CI; it does not fire on maintainer approval. Poll the review
state in the background so you are notified the moment it flips to
APPROVED + CLEAN:
while :; do
state=$(gh pr view <num> -R fluxcd/<repo> --json mergeStateStatus,reviewDecision --jq '.reviewDecision+" "+.mergeStateStatus')
case "$state" in "APPROVED CLEAN") echo "$state"; break;; esac
sleep 30
done
Run this in the background; when it exits, merge the PR and proceed.
Every git commit must use -s (sign-off). Never include Co-Authored-By
lines, your own name, or any AI attribution in commit messages, PR titles,
or PR descriptions. This applies to all PRs, including PRs that update this
skill file itself.
Always wait for CI to go green before merging any PR.
You cannot approve your own PRs. If a PR was opened by the git user driving
the session, ask a maintainer to approve it (or confirm it is already
approved) before merging.
Merge release PRs yourself (controller release PRs, changelog cherry-pick
PRs) as soon as CI is green and a maintainer has approved. No need to
ask the user to click merge — act on it immediately so the next step (tag
push, etc.) unblocks. This applies only to PRs opened with the user's
account during this session.
Review feedback on release PRs is applied by amending, not by adding
new commits. A release PR must stay at exactly two commits
(Add changelog entry for vX.Y.Z and Release vX.Y.Z). When the fix
belongs in the changelog, amend the changelog commit; when it belongs in
the release bump, amend that one. Use
git reset --soft HEAD~2 + re-commit, or an interactive rebase, then
git push --force-with-lease.
After applying a review fix, reply Fixed, thanks! on the thread and
resolve it. Reply via
gh api repos/<owner>/<repo>/pulls/<n>/comments/<cid>/replies -f body='Fixed, thanks!'
and resolve via the GraphQL resolveReviewThread mutation. Find thread
IDs with
gh api graphql -f query='{ repository(owner:"<o>",name:"<r>") { pullRequest(number:<n>) { reviewThreads(first:50) { nodes { id isResolved comments(first:1){nodes{databaseId body}} } } } } }'.
Do not watch CI on the skill-update PR continuously — it only needs to
merge at the very end of the procedure, so check CI right before merging
rather than keeping a watch open throughout the session.
Tags must be annotated and signed (git tag -s -m ...). Never create
release tags through the GitHub API — that produces lightweight tags which
break git tag -v verification.
Strictly follow the git commands documented in the release flow below. Do
not invent substitutions or skip steps — each step has a reason.
Do not declare a controller "done" until every step in the Release Flow
below has been executed for it, including the final changelog
cherry-pick PR back to main (step 11). Merging the release PR and
tagging is not the last step. Before reporting completion, walk through
each controller against the numbered steps and confirm each one ran.
PRs opened by this procedure use the commit subject as the PR title and an
empty body.
Preconditions
Read the upstream procedure at website/content/en/flux/releases/procedure.md,
section Controllers: patch releases.
Treat git and gh commands as confirmation points if the user wants that.
Use date to get the release date for changelog entries.
Fetch before reasoning about release branches or merged PRs. Do not trust stale
local origin/* refs.
Release Flow
For each controller:
Refresh local state.
git fetch --all --tags --prune
git switch release/vX.Y.x
git pull origin release/vX.Y.x
Create the release preparation branch exactly from the release series branch.
git switch -c release-vX.Y.Z release/vX.Y.x
Draft the new CHANGELOG.md entry.
Use the existing changelog structure in that repo.
Use the current date from date.
Build the entry from the commits merged into the release series branch since
the previous tag.
Prefer PR titles over commit subjects for bullets.
Check the PRs that introduced the changes; do not infer titles from local
commit messages.
For dependency-update PRs, inspect the PR body, any referenced upstream
PRs, and the go.mod diff for notable content (see "Dependency update
PRs" below) rather than settling for a generic bump line.
In the intro paragraph, summarize the concrete bug fixes shipped in the
patch release.
Commit the changelog entry.
git add CHANGELOG.md
git commit -s -m "Add changelog entry for vX.Y.Z"
Apply the release version bump exactly as documented.
Update the controller self-API version in the root go.mod.
Update config/manager/kustomization.yamlnewTag to vX.Y.Z.
Commit with:
git add go.mod config/manager/kustomization.yaml
git commit -s -m "Release vX.Y.Z"
Push the release preparation branch.
git push origin release-vX.Y.Z
Open and merge the release PR into the release series branch.
Base: release/vX.Y.x
Head: release-vX.Y.Z
Refresh the release series branch after merge.
git switch release/vX.Y.x
git pull origin release/vX.Y.x
Create and push signed tags from the updated release series branch.
Push the api/ tag first — the release tag depends on it.
git tag -s -m "api/vX.Y.Z" api/vX.Y.Z
git push origin api/vX.Y.Z
git tag -s -m "vX.Y.Z" vX.Y.Z
git push origin vX.Y.Z
Confirm the non-api/ tag triggered the release workflow.
Cherry-pick only the changelog commit back to main.
git switch main
git pull origin main
git switch -c pick-changelog-vX.Y.Z main
git cherry-pick -x <Add changelog entry commit>
git push origin pick-changelog-vX.Y.Z
Open PR from pick-changelog-vX.Y.Z to main
Do this one controller at a time — never chain several controllers'
cherry-picks into a single shell invocation. If such a batch is
interrupted partway, the branches it already created make a later
git switch -c fail, which silently leaves you on main, so the next
git cherry-pick lands the changelog commit on local main instead of
the pick branch. Before cherry-picking, confirm you are on
pick-changelog-vX.Y.Z; if the branch already exists, switch to it (or
delete and recreate it) rather than letting switch -c fail.
How To Build The Changelog Entry
For a patch release, gather:
the latest release tag on the release line
the merged commits on origin/release/vX.Y.x since that tag
the PRs corresponding to those merges
Write the new section at the top of CHANGELOG.md:
## X.Y.Z
**Release date:** YYYY-MM-DD
short intro paragraph describing the actual bug fixes in user-facing language
Fixes: when there are bug-fix items
Improvements: for dependency updates, docs, feature gates, or cleanup
Rules:
Use PR titles, not raw commit messages
Group multiple dependency bump PRs naturally when the repo history already does that
Verify the title against GitHub when the local merge commit is vague
Dependency update PRs
Do not reduce a dependency bump to a generic "Update fluxcd/pkg dependencies"
line and move on — the user-facing substance is usually hidden inside the bump.
Read the PR description and follow any referenced upstream PRs (e.g. an
Includes: fluxcd/pkg#NNNN line), and look at the actual go.mod diff to see
what really changed.
Call out notable items in the intro and bullets: security fixes with their
CVE/GHSA and an advisory link, plus a short parenthetical describing the
impact. When several controllers pull the same bump (e.g. the same go-git
release), use matching wording across their changelogs so readers can
correlate them.
Only mention a dependency change if it is relevant to what that controller
actually does. A bumped module often ships capabilities the controller never
exercises, and listing them implies a capability it does not have. For
example, GCP sovereign cloud artifact registry support (shipped via a
pkg/auth bump) is worth noting for source-controller and
image-reflector-controller, which pull from registries, but not for
image-automation-controller, which only talks to Git.
Critical Checks
Always fetch before comparing tag..origin/release/....
Always pull the release series branch before creating release-vX.Y.Z.
Always pull the release series branch again after merging the release PR and
before tagging.
Always inspect the actual root go.mod; do not assume the self-API path form.
source-watcher uses github.com/fluxcd/source-watcher/api/v2, so it still
needs the same self-API release bump pattern.
Do not silently special-case a controller. If the documented step seems not to
apply, inspect the file and confirm before proceeding.
Tag from the release series branch merge commit, not from the release prep branch.
Cherry-pick only the changelog commit back to main, not the release version bump.
Updating this skill
Improvements to this skill should land as a single-commit PR on a dedicated
branch. When accumulating more changes during a release session, amend and
force-push rather than adding new commits.
Keep the skill-update PR open during the release session and merge it
last, after all controller patch releases are done. Session learnings
tend to surface throughout the flow; amend them in as they come up.
Do not leak session-specific state, downstream/enterprise distribution
details, or AI attribution into the skill file.
