gridcoin-gui-wsl

name	gridcoin-gui-wsl
description	Build and run the Gridcoin Qt wallet GUI on Windows using WSL2 + WSLg, for iterating on the src/qt UI. Use when a Windows contributor asks to build, run, launch, or screenshot the Gridcoin GUI (gridcoinresearch). Windows-only — Linux/macOS contributors should build natively per doc/build.md.

Build & run the Gridcoin GUI on Windows (WSL2 + WSLg)

Native Windows (MSVC) builds are not supported. On Windows the fast path is to build a Linux-native Qt6 GUI inside WSL2 and let WSLg display the window on the Windows desktop. This skill automates the build → run → iterate loop for UI work. It complements doc/build-windows-wsl.md.

Scope: Windows 10/11 only. On Linux/macOS, build natively (see doc/build.md); this skill does not apply.

Prerequisites (one-time)

• Windows 10/11 with WSL2 + WSLg — check wsl --version shows a WSLg version. If WSL isn't installed: run wsl --install in an admin PowerShell, then reboot.
• Clone the repo INSIDE the WSL filesystem (e.g. ~/Gridcoin-Research on ext4), NOT under /mnt/c or OneDrive — building from /mnt/c is very slow and can hit file-permission issues.
• Build dependencies + the Qt6 Wayland plugin (see Setup).

Conventions (for the assistant running this skill)

• Run shell steps in the user's default WSL distro: wsl bash -lc '<cmd>' (or wsl -d <distro> … if they name one — discover with wsl -l -q). Never hardcode a distro name.
• Single-quote the bash -lc payload. Snippets wrapped in wsl bash -lc '…' are launched from the Windows host (PowerShell/cmd); single quotes stop the host shell from expanding $HOME, $REPO, $(nproc) etc. — they're resolved by bash inside WSL. Bare snippets below (Setup, Optional) are meant to be run from inside a WSL terminal.
• Repo path: default $HOME/Gridcoin-Research; if the user's clone is elsewhere, take the path as an argument and substitute. Always use $HOME / $USER — never a hardcoded username.
• Editing GUI source from a Windows editor: derive the Windows path with wslpath -w "$HOME/Gridcoin-Research/src/qt" (gives the \\wsl.localhost\<distro>\… UNC path). Don't hardcode it.
• Build dir: build-gui/ (kept separate from any build/ the user uses for tests). Binary: build-gui/bin/gridcoinresearch (CMake emits to bin/).

Setup (first time)

1. Install build deps — easiest is the helper script once: ./build_targets.sh TARGET=native USE_CCACHE=true (installs system deps, configures, builds). Or install Qt6/Boost/etc. per doc/build-dependencies.md.
2. Install the Qt6 Wayland platform plugin — REQUIRED for the window to render under WSLg (see Rendering note). Run in a real WSL terminal (sudo prompts for a password):

   sudo apt install -y qt6-wayland
   

   Verify (Ubuntu path; varies by distro):

   ls /usr/lib/x86_64-linux-gnu/qt6/plugins/platforms/ | grep wayland   # expect libqwayland-*.so
   

Configure + build (fast dev loop)

Configure build-gui/ once (GUI on, tests off, ccache); then incremental rebuilds are seconds. Reconfigure only if it's not already a GUI build:

wsl bash -lc 'REPO="$HOME/Gridcoin-Research"; cd "$REPO" && \
  grep -q "^ENABLE_GUI:BOOL=ON" build-gui/CMakeCache.txt 2>/dev/null || \
  cmake -B build-gui -DENABLE_GUI=ON -DUSE_QT6=ON -DENABLE_TESTS=OFF -DCMAKE_BUILD_TYPE=RelWithDebInfo \
    -DCMAKE_C_COMPILER_LAUNCHER=ccache -DCMAKE_CXX_COMPILER_LAUNCHER=ccache'
wsl bash -lc 'cd "$HOME/Gridcoin-Research" && cmake --build build-gui -j$(nproc)'

Replace $HOME/Gridcoin-Research with the clone path if it differs. The payload is single-quoted so the Windows host shell leaves $HOME/$REPO/$(nproc) for bash inside WSL to expand (see Conventions). Run the build in the background — a cold build is several minutes; incremental builds (after editing src/qt/...) are seconds thanks to ccache.

Run (WSLg)

Launch with native Wayland + an isolated datadir + regtest so the window comes up instantly and offline:

wsl bash -lc 'cd "$HOME/Gridcoin-Research" && mkdir -p "$HOME/gc-devdata" && \
  exec env QT_QPA_PLATFORM=wayland ./build-gui/bin/gridcoinresearch -datadir="$HOME/gc-devdata" -regtest'

• This blocks the terminal while the GUI runs. exec makes the GUI the foreground process, so the wsl call stays attached until you close the window — it does not return immediately. To keep working, launch it from a second WSL terminal, or background the whole wsl call from the Windows side (e.g. PowerShell Start-Process wsl -ArgumentList 'bash','-lc','<the payload>').
• Don't background it from inside WSL with nohup … & and then let the wsl invocation exit — WSL reaps the GUI when the distro goes idle. Keep at least one live wsl invocation holding it (the attached terminal, or the Windows-side Start-Process).
• QT_QPA_PLATFORM=wayland is REQUIRED (see Rendering note).
• -regtest gives a private, offline chain (no sync → instant idle UI); -datadir keeps it off your real wallet. For real-network behaviour use -testnet. Plain mainnet will sync ~4M blocks and starve the UI — avoid it for dev.

Rendering note (WSLg quirks — read if the window is blank)

• Blank/white window usually means it's rendering through XWayland. Ensure qt6-wayland is installed and QT_QPA_PLATFORM=wayland is set.
• WSLg's compositor tends to reliably render only the first Qt client after a fresh WSL start. If a relaunch comes up blank, reset and start clean:

  wsl --shutdown            # closes ALL WSL — save other WSL work first
  # then bring WSL back and wait for the compositor before launching:
  wsl bash -lc 'until [ -S "$XDG_RUNTIME_DIR/wayland-0" ]; do sleep 1; done; echo ready'
  

  Launch the GUI as the first client after that.
• These behaviours are environment-dependent (WSL/WSLg/GPU/driver). If your setup renders fine on relaunch, you can skip the reset step.

Optional: real Windows .exe / installer

Cross-compile a Windows build from WSL:

./build_targets.sh TARGET=win64 BUILD_TYPE=RelWithDebInfo USE_CCACHE=true

First run compiles the depends system (slow). Output: build_win64/bin/gridcoinresearch.exe; build the NSIS installer via the cpack step in doc/build-windows-wsl.md. On Ubuntu 22.04 you must install a newer MinGW toolchain first (see that doc); 24.04+ works out of the box.