remotecmd-cli

name	remotecmd-cli
description	Use this skill when the user or an agent wants to execute shell commands on remote machines via the remotecmd WebSocket relay, manage the remotecmd daemon/relay infrastructure, or check fleet health.

remotecmd-cli Skill

Remote command execution via WebSocket relay. Execute shell commands on remote machines over any network.

Architecture

Client → remotecmd-cli → WebSocket → Relay Hub → WebSocket → Target Daemon → sh -c

Three components:

• Target Daemon — runs on remote machine, executes commands
• Relay Hub — WebSocket relay that connects clients to daemons
• Client — triggers commands on remote targets

Channel — Direct CLI

Execute commands (single target)

remotecmd-cli --target <name> --cmd '<command>' --timeout 30 [--stream]
remotecmd-cli exec --target <name> --cmd '<command>' [--timeout <s>] [--stream]

Streaming mode: Add --stream flag to see output in real-time as it is produced. Without --stream, output is buffered and returned after command completion.

Execute commands (multi-target)

remotecmd-cli exec --targets <t1,t2,...> --cmd '<command>' [--timeout <s>] [--format json|table]
remotecmd-cli exec --group <name> --cmd '<command>' [--timeout <s>] [--format json|table]

Fleet health check

remotecmd-cli list-targets                              # smart: auto-probes stale nodes (>1h cache)
remotecmd-cli list-targets --refresh                    # force re-probe every target now
remotecmd-cli list-targets --json                       # machine-readable JSON output
remotecmd-cli list-targets --no-health                  # legacy config-only view (no probing)

rcl (default) probes each target by sending hostname via the relay in one multi-exec round trip. Results are cached per-target in ~/.remotecmd/health.json for 1 hour. Stale or never-probed targets are auto-probed; fresh ones use the cache (instant). Output table:

TARGET                 STATUS  SEEN              HOSTNAME
----------------------------------------------------------------------
dk1 → vpspoly1         up      3min ago          vpspoly1
rbm20                  down    checked 1h ago    target not connected

Target daemon management (on remote machine)

remotecmd-cli daemon start [--token <t>] [-daemon]     # start daemon (--daemon = background)
remotecmd-cli daemon stop                               # stop daemon
remotecmd-cli daemon status                             # check if running
remotecmd-cli daemon systemd install|remove             # install/remove systemd service

Relay management (on relay host)

remotecmd-cli relay daemon start --port <port> [-daemon]  # start relay hub
remotecmd-cli relay daemon stop                            # stop relay hub
remotecmd-cli relay daemon status                          # check relay hub status
remotecmd-cli relay daemon systemd install|remove          # install/remove systemd service

Configuration

remotecmd-cli set-relay --url <url> --name <n>          # configure relay connection
remotecmd-cli add-target --name <n> --token <t>         # add remote target
remotecmd-cli remove-target --name <n>                  # remove target
remotecmd-cli list-targets [--refresh] [--json] [--no-health]  # list targets + health
remotecmd-cli version                                    # show version

Port forwarding (tunnel — replaces ssh -L)

rcmd tunnel --target <name> --local <port> --remote <host:port>

Forwards a local port to a remote address through the target daemon.

Scheduled commands (cron — cloud relay only)

rcmd cron add --target <name> --schedule "0 3 * * *" --cmd "docker restart app" [--timeout 30]
rcmd cron list [--json]
rcmd cron remove --id <job-id>
rcmd cron logs --id <job-id> [--limit 10]
rcmd cron enable --id <job-id>
rcmd cron disable --id <job-id>

5-field cron expressions. Relay runs a scheduler goroutine. Offline targets = "skipped" (no retry).

Team access (cloud — scoped sub-tokens)

rcmd team token --role <admin|operator|viewer> [--targets prod,staging] [--label "Bob"] [--expires 24h]
rcmd team invite --email <e> --role <admin|operator|viewer> [--targets prod,staging] [--label "Bob"]
rcmd team accept <code>
rcmd team list [--json]
rcmd team revoke --token <sub-token>
rcmd team audit [--target <name>] [--since 7d] [--limit 50] [--json]

Roles: admin (all targets), operator (exec/cp/tunnel/cron on assigned targets), viewer (read-only). All command executions are recorded in the audit log.

Agent self-discovery

rcmd guide                                              # print the full operator reference

HTTP endpoints on the relay:

• GET /llms.txt — short agent breadcrumb (entry point for a lost AI assistant)
• GET /guide — full operator reference (all commands, flags, gotchas)

CRITICAL: The --name in set-relay must match the target name you use in add-target and when executing commands. The daemon registers with the relay using this name, and clients look up targets by this name. If they don't match, commands will fail with "target not connected" even if the daemon is running.

Group management

remotecmd-cli group create --name <n> --targets <t1,t2,...>
remotecmd-cli group add --name <n> --targets <t1,t2,...>
remotecmd-cli group remove --name <n> --targets <t1,t2,...>
remotecmd-cli group delete --name <n>
remotecmd-cli group list

File transfer

remotecmd-cli cp --target <name> --src <path> --dst <path> [--stream]

Alias Management

remotecmd-cli alias install                             # install all 8 aliases
remotecmd-cli alias uninstall                           # remove installed aliases

Convenience Aliases (after running remotecmd-cli alias install):

Alias	Usage	Description
rc	rc <any-command>	Full CLI shortcut
rcx	rcx <target> <cmd> [--stream] [timeout]	Execute on one target (default 10s)
rcx	rcx --targets <t1,t2> <cmd> [timeout]	Multi-target execute (table output, default 30s)
rcx	rcx --group <name> <cmd> [timeout]	Group execute (table output, default 30s)
rcl	rcl [--refresh] [--json] [--no-health]	List targets with health (auto-probes stale >1h)
rcs	rcs <target>	Check daemon status on target via PID file
rcc	rcc <target> <src> <dst> [--stream]	Copy files/directories to remote target
rcg	rcg list|create|add|remove|delete	Manage target groups
rcd	rcd start|stop|status|systemd	Manage local daemon
rcr	rcr start|stop|status|systemd	Manage local relay hub

Daemon Persistence (survive reboots)

Daemons do NOT auto-start after reboot unless a systemd service is installed.

Standard Linux (system-level service, recommended)

# On the target machine — works for root, VMs, physical hosts:
remotecmd-cli daemon systemd install

This creates a systemctl --user service. In LXC containers this fails (no D-Bus user session — "Failed to connect to bus: No medium found").

LXC containers (manual system service)

LXC containers need a system-level unit at /etc/systemd/system/ with Environment=HOME=/root (without it, systemd doesn't set HOME, so the daemon can't find ~/.remotecmd/config.json and fails with "Relay not configured"):

BIN=$(which remotecmd-cli)
cat > /etc/systemd/system/remotecmd-daemon.service << EOF
[Unit]
Description=remotecmd-cli Target Daemon
After=network-online.target
Wants=network-online.target

[Service]
Type=simple
Environment=HOME=/root
ExecStart=$BIN daemon start
Restart=always
RestartSec=5
StandardOutput=journal
StandardError=journal

[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload && systemctl enable remotecmd-daemon && systemctl start remotecmd-daemon

Relay hub persistence (dk1)

Same pattern but system-level (relay needs root for port binding):

remotecmd-cli relay daemon systemd install   # run as root

Channel — Supercli Plugin

If the supercli remotecmd plugin is installed, use sc remotecmd:

sc remotecmd exec run --target <name> --cmd "<command>" --timeout <s> [--stream]
sc remotecmd daemon start [--token <t>] [--daemon]
sc remotecmd daemon stop
sc remotecmd daemon status
sc remotecmd relay start --port <port> [--daemon]
sc remotecmd relay stop
sc remotecmd relay status
sc remotecmd relay config --url <u> --name <n>
sc remotecmd target add --name <n> --token <t>
sc remotecmd target remove --name <n>
sc remotecmd target list
sc remotecmd self version

Installation

curl -LO https://github.com/javimosch/remotecmd-cli/releases/latest/download/remotecmd-cli-linux-amd64
chmod +x remotecmd-cli-linux-amd64
sudo mv remotecmd-cli-linux-amd64 /usr/local/bin/remotecmd-cli

File Locations

• Config file: ~/.remotecmd/config.json
• Daemon token: ~/.remotecmd/token (auto-generated on daemon start)
• Health cache: ~/.remotecmd/health.json (per-target last-seen, status, hostname, latency)
• Daemon PID file: /tmp/remotecmd-daemon.pid
• Relay PID file: /tmp/remotecmd-relay.pid

Output Format

All command execution returns JSON:

{
  "ok": bool,
  "stdout": "...",
  "stderr": "...",
  "exit_code": int,
  "duration_ms": int
}

Key Concepts

• Timeout: Commands support --timeout <seconds> to prevent hanging
• Daemon mode: Use --daemon flag to run processes in background
• Auto-reconnect: Daemons automatically reconnect every 5s if connection drops
• Token authentication: Daemons require tokens for security; tokens are generated on start
• Health cache: rcl caches probe results for 1h per target; --refresh forces a fresh probe

Common Workflow

1. Start relay hub on a central machine
2. Start daemon on target machine with token
3. Configure client with relay URL and target token
4. Install convenience aliases: remotecmd-cli alias install
5. Execute commands remotely: rcx <target> <cmd>
6. Check fleet health: rcl (or rcl --refresh to force)
7. Install systemd service on targets so daemons survive reboots

Troubleshooting

"target not connected" — daemon not running on target

This is the #1 issue. The daemon simply stopped (not crashed — config is fine).

ssh <target> "remotecmd-cli daemon status"
ssh <target> "remotecmd-cli daemon start -daemon"
rcx <target> "hostname"   # verify

If this keeps happening after reboots, install the systemd service (see Daemon Persistence above).

Daemon not starting

• Check if port is already in use
• Remove stale PID files: rm /tmp/remotecmd-*.pid
• Verify token file exists at ~/.remotecmd/token
• If running under systemd: journalctl -u remotecmd-daemon --no-pager -n 20

systemd service fails with "Relay not configured"

Missing Environment=HOME=/root in the unit file. systemd doesn't set HOME by default, so the daemon can't find ~/.remotecmd/config.json. See the LXC container pattern above.

Relay connectivity issues

• Test relay health: curl -s http://<relay-host>:<port>/health
• Expected response: {"status":"healthy"}
• Verify firewall allows WebSocket traffic

Command execution failures

• Test with simple command: remotecmd-cli --target <name> --cmd 'echo test' --timeout 10
• Check daemon status on target machine
• Verify target configuration in ~/.remotecmd/config.json
• CRITICAL: Ensure the daemon's set-relay --name matches the target name used in commands

Stale health cache

If rcl shows outdated status, force a fresh probe: rcl --refresh Or delete the cache: rm ~/.remotecmd/health.json