Conduct wireless network security assessments using Kismet to detect rogue access points, hidden SSIDs, weak encryption, and unauthorized clients through passive RF monitoring. Use when conducting wireless network security assessments using kismet to detect rogue.
Instalar com Codex ou Claude Copie este prompt, cole no Codex, Claude ou outro assistente e deixe que ele revise a página da skill e instale para você.
Um comando direto ignora o prompt de revisão. Verifique a origem antes de executá-lo.
Conduct wireless network security assessments using Kismet to detect rogue access points, hidden SSIDs, weak encryption, and unauthorized clients through passive RF monitoring. Use when conducting wireless network security assessments using kismet to detect rogue.
Performing Wireless Security Assessment with Kismet
Overview
Kismet is an open-source wireless network detector, packet sniffer, and wireless intrusion detection system (WIDS) supporting 802.11a/b/g/n/ac/ax. Unlike active scanners, Kismet operates in passive monitor mode, making it undetectable to the networks being assessed. It captures raw 802.11 frames, identifies access points, clients, probe requests, and encryption types without transmitting any packets. This skill covers deploying Kismet for comprehensive wireless security assessments, identifying rogue access points, detecting weak encryption, mapping hidden networks, and analyzing client behavior.
When to Use
Trigger phrases:
"performing wireless security assessment with kismet"
"Conduct wireless network security assessments using Kismet to detect rogue acces"
When conducting security assessments that involve performing wireless security assessment with kismet
When following incident response procedures for related security events
When performing scheduled security testing or auditing activities
When validating security controls through hands-on testing
Prerequisites
Linux system (Kali Linux, Ubuntu 22.04+) with Kismet 2023+ installed
Scope the task — define objectives, boundaries, and success criteria
Gather information — collect all necessary data and context before proceeding
Execute the core workflow — follow the domain-specific steps methodically
Validate results — verify outputs against expected outcomes or baselines
Document findings — record results, anomalies, and recommendations
Step 1: Prepare Wireless Adapter
# Identify wireless interfaces
iwconfig
# Check adapter capabilities
iw list | grep -A 10 "Supported interface modes"# Kill processes that may interferesudo airmon-ng check kill# Enable monitor modesudo ip linkset wlan0 down
sudo iw dev wlan0 settype monitor
sudo ip linkset wlan0 up
# Verify monitor mode
iw dev wlan0 info | grep type
Step 2: Configure and Launch Kismet
Edit /etc/kismet/kismet.conf:
# Data sourcessource=wlan0:name=WiFi-Monitor,channel_hop=true,channel_hoprate=5/sec
# Logging configurationlog_types=kismet,pcapng
log_prefix=/opt/kismet/logs/assessment
# Enable all 802.11 channels (2.4GHz and 5GHz)channel_hop_speed=5channel_list=IEEE80211:1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165# GPS configuration (if available)gps=gpsd:host=localhost,port=2947# Alert configurationalert=ADVCRYPTCHANGE,5/min,1/sec
alert=BSSTIMESTAMP,5/min,1/sec
alert=CRYPTODROP,5/min,1/sec
alert=DISASSOCTRAFFIC,10/min,1/sec
alert=DEAUTHFLOOD,10/min,2/sec
alert=PROBENOMFP,5/min,1/sec
Launch Kismet:
# Start Kismet serversudo kismet -c wlan0
# Access web interface# Open browser to http://localhost:2501# Default credentials: kismet / kismet (change immediately)
Step 3: Conduct Assessment Scans
Rogue Access Point Detection:
# Export device list via Kismet REST API
curl -u kismet:kismet http://localhost:2501/devices/summary/devices.json | \
python3 -m json.tool > all_devices.json
# Filter for access points
curl -u kismet:kismet \
'http://localhost:2501/devices/summary/devices.json' \
-d 'json={"fields":["kismet.device.base.macaddr","kismet.device.base.name","kismet.device.base.type","kismet.device.base.crypt","kismet.device.base.channel","kismet.device.base.manuf","dot11.device/dot11.device.advertised_ssid_map/dot11.advertisedssid.ssid"]}' \
> access_points.json
Client Probe Analysis:
Probe requests reveal networks that clients have previously connected to, which can indicate:
Corporate devices connecting to insecure home networks
Devices searching for known-evil SSIDs (evil twin susceptibility)
Unauthorized personal devices in corporate space
Step 4: Analyze Results
Python analysis script for Kismet database:
#!/usr/bin/env python3"""Analyze Kismet capture database for wireless security findings."""import sqlite3
import json
import sys
from collections import defaultdict
defanalyze_kismet_db(db_path: str):
"""Analyze Kismet SQLite database for security issues."""
conn = sqlite3.connect(db_path)
cursor = conn.cursor()
findings = []
# Query all devices
cursor.execute("""
SELECT devmac, type, device
FROM devices
""")
devices = cursor.fetchall()
ap_count = 0
client_count = 0
open_networks = []
wep_networks = []
wpa_tkip_networks = []
hidden_networks = []
all_aps = []
for mac, dev_type, device_json in devices:
try:
device = json.loads(device_json)
except json.JSONDecodeError:
continue
base = device.get('kismet.device.base.type', '')
if'Wi-Fi AP'in base or'Wi-Fi Device'in base:
ap_count += 1
ssid_map = device.get('dot11.device', {}).get(
'dot11.device.advertised_ssid_map', []
)
crypt = device.get('kismet.device.base.crypt', '')
name = device.get('kismet.device.base.name', 'Unknown')
channel = device.get('kismet.device.base.channel', '')
manuf = device.get('kismet.device.base.manuf', 'Unknown')
ap_info = {
'mac': mac,
'ssid': name,
'encryption': crypt,
'channel': channel,
'manufacturer': manuf,
}
all_aps.append(ap_info)
if'None'in crypt or crypt == '':
open_networks.append(ap_info)
elif'WEP'in crypt:
wep_networks.append(ap_info)
elif'WPA+TKIP'in crypt and'AES'notin crypt:
wpa_tkip_networks.append(ap_info)
for ssid_entry in ssid_map:
ifisinstance(ssid_entry, dict):
ssid = ssid_entry.get('dot11.advertisedssid.ssid', '')
if ssid == ''or ssid isNone:
hidden_networks.append(ap_info)
elif'Wi-Fi Client'in base:
client_count += 1# Generate findingsprint(f"\n{'='*70}")
print("WIRELESS SECURITY ASSESSMENT REPORT")
print(f"{'='*70}")
print(f"\nTotal Access Points Detected: {ap_count}")
print(f"Total Clients Detected: {client_count}")
if open_networks:
print(f"\n[CRITICAL] Open Networks (No Encryption): {len(open_networks)}")
for net in open_networks:
print(f" - SSID: {net['ssid']}, MAC: {net['mac']}, "f"Channel: {net['channel']}, Vendor: {net['manufacturer']}")
if wep_networks:
print(f"\n[CRITICAL] WEP-Encrypted Networks: {len(wep_networks)}")
for net in wep_networks:
print(f" - SSID: {net['ssid']}, MAC: {net['mac']}, "f"Channel: {net['channel']}")
if wpa_tkip_networks:
print(f"\n[HIGH] WPA-TKIP Networks (Deprecated): {len(wpa_tkip_networks)}")
for net in wpa_tkip_networks:
print(f" - SSID: {net['ssid']}, MAC: {net['mac']}, "f"Channel: {net['channel']}")
if hidden_networks:
print(f"\n[MEDIUM] Hidden SSIDs Detected: {len(hidden_networks)}")
for net in hidden_networks:
print(f" - MAC: {net['mac']}, Channel: {net['channel']}, "f"Vendor: {net['manufacturer']}")
# Channel utilization analysis
channel_usage = defaultdict(int)
for ap in all_aps:
ch = ap.get('channel', 'Unknown')
channel_usage[ch] += 1print(f"\n[INFO] Channel Utilization:")
for ch, count insorted(channel_usage.items()):
print(f" Channel {ch}: {count} APs")
conn.close()
if __name__ == '__main__':
db_path = sys.argv[1] iflen(sys.argv) > 1else'Kismet-*.kismet'
analyze_kismet_db(db_path)
Step 5: Detect Rogue Access Points
Compare discovered APs against authorized inventory:
#!/usr/bin/env python3"""Detect rogue access points by comparing against authorized AP list."""import json
import sys
defload_authorized_aps(filepath: str) -> set:
"""Load authorized AP MAC addresses from file."""
authorized = set()
withopen(filepath, 'r') as f:
for line in f:
mac = line.strip().lower()
if mac andnot mac.startswith('#'):
authorized.add(mac)
return authorized
defdetect_rogues(kismet_json: str, authorized_file: str):
"""Compare discovered APs against authorized list."""
authorized = load_authorized_aps(authorized_file)
withopen(kismet_json, 'r') as f:
devices = json.load(f)
rogues = []
for device in devices:
mac = device.get('kismet.device.base.macaddr', '').lower()
dev_type = device.get('kismet.device.base.type', '')
if'AP'in dev_type and mac notin authorized:
rogues.append({
'mac': mac,
'ssid': device.get('kismet.device.base.name', 'Unknown'),
'encryption': device.get('kismet.device.base.crypt', ''),
'channel': device.get('kismet.device.base.channel', ''),
'manufacturer': device.get('kismet.device.base.manuf', ''),
'signal': device.get('kismet.device.base.signal', {}).get(
'kismet.common.signal.last_signal', 0),
})
if rogues:
print(f"\n[ALERT] {len(rogues)} ROGUE ACCESS POINTS DETECTED\n")
for rogue in rogues:
print(f" MAC: {rogue['mac']}")
print(f" SSID: {rogue['ssid']}")
print(f" Encryption: {rogue['encryption']}")
print(f" Channel: {rogue['channel']}")
print(f" Vendor: {rogue['manufacturer']}")
print(f" Signal: {rogue['signal']} dBm")
print()
else:
print("No rogue access points detected.")
if __name__ == '__main__':
iflen(sys.argv) < 3:
print("Usage: python detect_rogues.py <kismet_devices.json> <authorized_aps.txt>")
sys.exit(1)
detect_rogues(sys.argv[1], sys.argv[2])
Assessment Checklist
All authorized APs identified and verified
Rogue/unauthorized APs identified and located
Encryption types documented for all SSIDs
Hidden SSIDs discovered and documented
Client probe requests analyzed for sensitive patterns
Evil twin susceptibility assessed
WPS status checked on all APs
Signal coverage boundaries mapped
Guest network isolation verified
Management interfaces not exposed on wireless
Best Practices
Written Authorization - Always obtain signed authorization before performing wireless assessments
Passive Only - Use Kismet in passive mode; do not transmit deauth frames or probe requests
Comprehensive Channel Coverage - Scan both 2.4GHz and 5GHz bands including DFS channels
Multiple Locations - Perform captures from multiple physical locations for complete coverage
Time Duration - Capture for at least 30-60 minutes to observe intermittent devices
GPS Mapping - Use GPS to create heat maps for signal boundary analysis
Baseline Comparison - Maintain an authorized AP inventory and compare against each assessment
When NOT to Use
You don't have explicit written authorization to test
Task is about defense/detection, not offense (use detection skills)
You need to implement security controls (use implementing-* skills)
