skillshare-codebase-audit

name	skillshare-codebase-audit
description	Cross-validate CLI flags, docs, tests, and targets for consistency across the codebase. Use this skill whenever the user asks to: audit the codebase, check for consistency issues, find undocumented flags, verify test coverage, validate targets.yaml, check handler split conventions, or verify oplog instrumentation. This is a read-only audit — it reports issues but never modifies files. Use after large refactors, before releases, or whenever you suspect docs/code/tests have drifted out of sync.
metadata	{"targets":["claude","universal"]}

Read-only consistency audit across the skillshare codebase. $ARGUMENTS specifies focus area (e.g., "flags", "tests", "targets") or omit for full audit.

Scope: This skill only READS and REPORTS. It does not modify any files. Use implement-feature to fix issues or update-docs to fix documentation gaps.

Audit Dimensions

Run all 4 dimensions in parallel where possible. For each, produce a summary table.

1. CLI Flag Audit

Compare every flag defined in cmd/skillshare/*.go against website/docs/commands/*.md.

# Find all flags in Go source
grep -rn 'flag\.\(String\|Bool\|Int\)' cmd/skillshare/
grep -rn 'Args\|Usage' cmd/skillshare/

Report:

• UNDOCUMENTED: Flag exists in code but not in docs
• STALE: Flag documented but not found in code
• OK: Flag matches between code and docs

2. Spec vs Code

For each spec in specs/ marked as completed/done:

• Verify the described feature exists in source code
• Check that the spec's acceptance criteria are testable

Report:

• IMPLEMENTED: Spec complete, code exists
• MISMATCH: Spec says done but code missing or partial
• PENDING: Spec not yet marked complete (informational)

3. Test Coverage

For each command handler in cmd/skillshare/<cmd>.go:

• Check if tests/integration/<cmd>_test.go exists
• Check if key behaviors have test cases

# List all command handlers
ls cmd/skillshare/*.go | grep -v '_test.go\|main.go\|helpers.go\|mode.go'

# List all integration tests
ls tests/integration/*_test.go

Report:

• COVERED: Command has integration test file with test cases
• PARTIAL: Test file exists but missing key scenarios
• MISSING: No integration test for this command

4. Target Audit

Verify internal/config/targets.yaml entries:

• Each target has both global_path and project_path
• Aliases are consistent
• No duplicate entries

Report:

• OK: Target entry complete and valid
• INCOMPLETE: Missing required fields
• DUPLICATE: Name or alias collision

Output Format

== Skillshare Codebase Audit ==

### CLI Flags (N issues)
| Command   | Flag        | Status       |
|-----------|-------------|--------------|
| install   | --force     | OK           |
| install   | --into      | UNDOCUMENTED |

### Specs (N issues)
| Spec File            | Status      |
|----------------------|-------------|
| copy-sync-mode.md    | IMPLEMENTED |
| some-feature.md      | MISMATCH    |

### Test Coverage (N issues)
| Command   | Status  | Notes              |
|-----------|---------|--------------------|
| sync      | COVERED |                    |
| audit     | PARTIAL | missing edge cases |
| target    | MISSING |                    |

### Targets (N issues)
| Target    | Status     | Notes         |
|-----------|------------|---------------|
| claude    | OK         |               |
| newagent  | INCOMPLETE | no project_path |

== Summary: X OK / Y issues found ==

5. Handler Split Audit

For commands with >300 lines in cmd/skillshare/<cmd>.go, verify the handler split convention is followed:

# Find large command files
wc -l cmd/skillshare/*.go | sort -rn | head -20

Check that large commands are properly split:

Suffix	Expected for large commands
_handlers.go	Core logic extracted
_render.go	Output rendering separated
_tui.go	TUI components isolated

Report:

• SPLIT: Large command properly follows handler split convention
• MONOLITH: >300 lines without split (should be refactored)
• N/A: Small command, no split needed

6. Oplog Coverage

Verify all mutating commands have oplog instrumentation:

# Find commands that modify state
grep -rn 'func handle\|func cmd' cmd/skillshare/*.go

# Check for oplog.Write calls
grep -rn 'oplog.Write' cmd/skillshare/

Mutating commands (install, uninstall, sync, update, init, collect, backup, restore, trash) should all write to oplog. Read-only commands (list, status, check, search, audit, log, version) should not.

Report:

• INSTRUMENTED: Mutating command has oplog.Write
• MISSING: Mutating command lacks oplog instrumentation
• N/A: Read-only command (no oplog expected)

7. Web API Consistency

Verify internal/server/handler_*.go routes match CLI commands:

# List all handler files
ls internal/server/handler_*.go | grep -v _test.go

# Check route registration in server.go
grep -n 'HandleFunc\|Handle(' internal/server/server.go

Report:

• SYNCED: CLI command has corresponding API handler
• CLI-ONLY: Command exists in CLI but not in Web API (may be intentional)
• API-ONLY: API handler without CLI counterpart (unusual)

Output Format

== Skillshare Codebase Audit ==

### CLI Flags (N issues)
| Command   | Flag        | Status       |
|-----------|-------------|--------------|
| install   | --force     | OK           |
| install   | --into      | UNDOCUMENTED |

### Specs (N issues)
| Spec File            | Status      |
|----------------------|-------------|
| copy-sync-mode.md    | IMPLEMENTED |
| some-feature.md      | MISMATCH    |

### Test Coverage (N issues)
| Command   | Status  | Notes              |
|-----------|---------|--------------------|
| sync      | COVERED |                    |
| audit     | PARTIAL | missing edge cases |
| target    | MISSING |                    |

### Targets (N issues)
| Target    | Status     | Notes         |
|-----------|------------|---------------|
| claude    | OK         |               |
| newagent  | INCOMPLETE | no project_path |

### Handler Split (N issues)
| Command   | Lines | Status    | Notes              |
|-----------|-------|-----------|--------------------|
| install   | 450   | SPLIT     | 6 sub-files        |
| audit     | 320   | MONOLITH  | should split render |
| status    | 80    | N/A       |                    |

### Oplog (N issues)
| Command   | Mutating? | Status        |
|-----------|-----------|---------------|
| install   | Yes       | INSTRUMENTED  |
| trash     | Yes       | MISSING       |
| list      | No        | N/A           |

### Web API (N issues)
| Command   | CLI | API | Status   |
|-----------|-----|-----|----------|
| install   | Yes | Yes | SYNCED   |
| diff      | Yes | No  | CLI-ONLY |

== Summary: X OK / Y issues found ==

Rules

• Read-only — never modify files, only report
• Evidence-based — every finding must include file path and line number
• No false positives — verify with grep before flagging
• Scope $ARGUMENTS — if user specifies "flags", only run dimension 1; "handlers" for dimension 5, "oplog" for dimension 6, "api" for dimension 7