kernel-debug

# Debug a live Windows kernel target ## MCP connection Use the existing mcp-windbg MCP connection, whether it is launched by a plugin, a native executable, Python, or an HTTP service. Tool names below are base names; resolve them against the tools exposed by that connection rather than assuming a plugin-specific prefix. Keep each session on the server that opened it. If multiple servers match, use the user's selected server or ask which one. If the required tools are unavailable, report the missing connection or tool and help check its configuration; do not register a second server. Drive a kernel target with the `mcp-windbg` kd tools. A kernel session halts the whole machine while it is broken in, so treat the target's running state as something you are responsible for. ## Connecting `open_kd_session` with the `-k` connection string: - KDNET: `net:port=50000,key=1.2.3.4` - Named pipe: `com:pipe,port=\.\pipe\com_1,baud=115200,reconnect` - Serial: `com:port=COM1,baud=115200` Ask for the string rather than guessing it. The session arrives already broken in, so you can issue commands immediately. ## Working the target `run_kd_command` with the `session_id`. Common ground: - `vertarget`, `!pcr`, `lm m nt` to confirm what you are attached to - `!process 0 0`, `!thread`, `!irp` for OS state - `bp <module>!<symbol>` to set a breakpoint - `!analyze -v` after a bugcheck ## Letting the machine run This is where a kernel session differs from a dump, and where it is easy to leave a machine frozen: - `g` resumes the target and returns immediately. It does not wait, and it does not produce output until the target stops again. - `wait_for_break` blocks until the target stops on its own - a bugcheck, a breakpoint, a manual break - and returns what the debugger printed. - `send_ctrl_break` halts a running target now. - Any ordinary command issued while the target runs breaks in automatically first, and the reason it stopped leads that command's output. A typical loop: set a breakpoint, `g`, tell the user to trigger the code path, then `wait_for_break`. ## Finishing `close_kd_session` with `resume: true` (the default) so the machine runs again. Only pass `resume: false` when the user explicitly wants it left halted, and say plainly that the machine will stay frozen until a debugger releases it. If you set breakpoints, clear them with `bc *` before closing unless the user wants them kept.