merge-up

name	merge-up
description	Cascade-merge maintained Symfony branches from oldest to newest (e.g. 6.4 → 7.4 → 8.0 → 8.1). Use when the user says "merge branches", "merge up", "cascade merge", "sync branches", or "update branches".

Symfony Branch Cascade Merge

Merges each maintained branch into the next one, from oldest to newest.

Progress checklist

• Step 0: Pre-flight checks
• Step 1: Fetch maintained branches and pull them
• Step 2: Cascade merge loop

---

Confirmation rule

Whenever the skill says "Wait for confirmation", treat anything other than an explicit affirmative as no: stop and ask the user how they want to proceed.

---

Step 0 — Pre-flight checks

git status --porcelain --untracked-files=no

If any output, stop:

"The working tree is not clean. Please commit or stash your changes first."

---

Step 1 — Fetch maintained branches and pull them

1a. Get the branch list

curl -s https://symfony.com/releases.json

Read maintained_versions. It is already sorted oldest → newest (e.g. ["6.4", "7.4", "8.0", "8.1"]). Store as BRANCHES.

1b. Pull every branch

For each branch in BRANCHES:

git checkout <branch>
git pull --ff-only origin <branch>

Using --ff-only ensures local branches haven't diverged from origin. If the pull fails, stop and report the error.

---

Step 2 — Cascade merge loop

For each consecutive pair (SOURCE, TARGET) in BRANCHES:

2a. Merge

git checkout <TARGET>
composer up
git merge <SOURCE>

Three outcomes are possible:

• Already up-to-date: print "✓ <TARGET> already up-to-date with <SOURCE>" and skip to the next pair.
• Clean merge (no conflicts): git creates the merge commit automatically. Proceed directly to step 2c.
• Conflicts: proceed to step 2b.

2b. Resolve conflicts (only when git reports conflicts)

List conflicts:

git diff --name-only --diff-filter=U

Read each conflicted file, resolve it, then git add it. When all are resolved:

git commit --no-edit

Conflict resolution rules

File pattern	Strategy
CHANGELOG*.md	Keep entries from both sides; newer branch entries on top
Version constants, composer.json branch aliases	Keep the TARGET branch value
.github/workflows/*.yml, CI config	Keep the TARGET value for branch-specific pins. A new job merged from SOURCE may carry SOURCE's php-version (its branch minimum); bump it to the TARGET's minimum (see min_php_requirements in releases.json)
Idiom the TARGET replaced (e.g. unserialize(serialize()) - a deep-clone helper, logic extracted to a trait, a method/class removed)	Take the TARGET version; the SOURCE change is superseded. git checkout --ours <file> then re-apply any security option (e.g. allowed_classes) the TARGET's version happens to drop
File the TARGET deleted (modify/delete conflict)	Keep it deleted if the TARGET removed the feature (confirm with git log <TARGET> -- <file>); the SOURCE edit is moot. git rm <file>
Test using docblock metadata (@dataProvider, @testWith, @group legacy)	Convert to attributes (#[DataProvider(...)], #[TestWith([...])], #[Group(...)]) when the TARGET runs PHPUnit 10+ (7.4/8.x here); PHPUnit ignores all metadata in doc-comments, so the data sets are never passed and the test errors with "too few arguments"
Compat guard added by SOURCE (class_exists() / method_exists() fallback for a symbol that may be missing from an older sibling package)	Check whether the TARGET dropped it on purpose: git log <TARGET> -S'<guard text>' -- <file>. Symfony removes these in "Remove legacy code paths that rely on feature checks" style commits, so take SOURCE's new structure but leave the guard out
Both sides added a member at the same spot (no overlapping content, git just collapsed them onto a shared closing)	Keep both. Give each its own terminator: two elseif branches each need their own return/closing brace, and two methods each need their own }. Private methods go last, after all public ones

Structural divergence across major versions

A newer major may have removed deprecated classes, attributes, or config formats (e.g. TaggedLocator, XML DI config), raised the minimum PHP version, or refactored shared logic into a trait or a new utility class. When merging across such a boundary:

• Remove test methods marked @group legacy / #[Group('legacy')] for deprecations the new major dropped, and any test/fixture/import that references a removed symbol (otherwise it fatals on the TARGET).
• Each major raises the minimum PHP (min PHP per branch in releases.json min_php_requirements: 6.4=8.1, 7.4=8.2, 8.0=8.4). Code merged from SOURCE that branches on or polyfills a PHP below the TARGET's minimum (\PHP_VERSION_ID < ... guards, or function_exists() / class_exists() fallbacks for now-always-available symbols) is dead on the TARGET and can be collapsed to the modern path. The TARGET usually dropped it already, so prefer its version; clean up only where SOURCE's old-PHP code lands somewhere the TARGET had not simplified.
• Prefer the TARGET branch's approach for any refactored idiom.
• Fastest sanity check: look at how the downstream branch (one already past this divergence, e.g. 8.2 while resolving on 8.0) resolved the same files, and match it.

Divergence a clean merge hides

Most of these produce no conflict at all: the merge succeeds and the tests fail. All three show up as a merged test that is fine on SOURCE and wrong on TARGET.

• A config key the TARGET removed or deprecated. A merged test builds a config array ('annotations' => false, 'profiler' => ['collect_serializer_data' => true]) that the TARGET no longer accepts. The symptom is Unrecognized option "x" under "framework" with the valid list attached, or a deprecation the run reports as an issue. Drop the key: these are boilerplate, not what the test is about. Grep the whole merge diff for the key, since several merged tests usually carry it.
• Registration the TARGET gates. The TARGET may drop a service unless something consumes it (profiler or test mode, for instance), so a merged test asserting on it fails with "You have requested a non-existent service". Do not assert on a stripped container: rebuild it the way the TARGET's own sibling tests do, keeping the assertion intact.
• A default the TARGET flipped. SOURCE adds a code path behind a flag whose default the TARGET changed, so the new path becomes the TARGET's default and changes observable output. Both sides merge cleanly and the assertions SOURCE wrote for the old path now fail. Confirm with git log <TARGET> -S'<flag> = <value>', then adapt the expectations, capturing the real output from a run rather than guessing at it.

After resolving, show git diff HEAD~1 (first parent of the merge commit, i.e. the previous TARGET state) and wait for the user to confirm the resolution looks correct before proceeding.

2c. Run tests for affected components

Extract component, bridge, and bundle names from changed files:

git diff --name-only HEAD~1..HEAD

Paths look like src/Symfony/{Component,Bridge,Bundle}/<NAME>/.... Deduplicate, then run tests for each:

./phpunit src/Symfony/Component/<NAME>
./phpunit src/Symfony/Bridge/<NAME>
./phpunit src/Symfony/Bundle/<NAME>

For files under src/Symfony/Contracts/, run the single shared test suite:

./phpunit src/Symfony/Contracts

Ignore files outside these directories (root configs, .github/, etc.): they don't have component-level test suites.

Read the whole summary line, not just the exit status: a suite can end with Tests: N, Failures: 1 or abort on a Fatal error well before any FAILURES! banner, and ANSI colour codes sit in front of those words, so a check anchored to the start of a line reports a red run as green.

If tests fail or report PHPUnit deprecations (the PHPUnit version may differ between branches), first check whether the failure is pre-existing. Cheapest test first: if the merge did not touch the failing area, it did not cause the failure.

git diff --name-only HEAD~1..HEAD -- <path of the failing test or the code it covers>

Only when that is inconclusive, run the test on the TARGET before the merge (git checkout HEAD~1, run, git checkout <TARGET>). Beware a CI baseline as evidence: a branch tip that has not been pushed in a while keeps an old green run, and CI installs dependencies fresh on every run, so a release made in between can turn a suite red with no commit to blame.

Only fix failures introduced by the merge:

1. Analyze and fix the code, including any PHPUnit deprecation notices.
2. Commit the fix: [<ComponentName>] Fix merge conflict resolution.
3. Re-run failing tests until green and deprecation-free.

Report any pre-existing failures to the user without attempting to fix them.

Failures a local run cannot show

Locally, every sibling symfony/* package resolves to the branch you are on, so cross-component drift is invisible. CI's high-deps job installs the newest dev of the other components and low-deps the oldest each composer.json allows, which is where merged tests break even though the merge itself is sound:

• An assertion pinned to another component's message. A newer sibling appends to an exception message and an expectation that ended at the old last word stops matching. Assert the part that identifies the failure and leave the tail free (drop a trailing ., or use expectExceptionMessageMatches()), and fix it on the oldest branch that has the test so the cascade carries it up.
• A test in the wrong component. A test exercising code that lives in component B but sitting in component A passes everywhere except low-deps, where A's composer.json pulls a B too old to have the feature. Move the test to B rather than raising A's constraint or skipping the case; low-deps is what proves A's declared constraints are honest.

2c-bis. Run the repo's static-analysis / hardening checks

If the repo ships custom static analysis (this one has .github/sa-tools/ with PHPStan rules and check-hardening-tests.php), the merge carries those rules into the TARGET, where they now apply to the TARGET's own code. Newer-branch code can trip rules the SOURCE introduced but never had to satisfy. Run them:

php .github/sa-tools/check-hardening-tests.php
# and the custom PHPStan rules, as wired in .github/workflows/static-analysis.yml

Fix the branch-specific gaps (e.g. add ['allowed_classes' => …] to a bare unserialize(), add an instanceof \Stringable guard to a string-property __unserialize(), or add the missing regression test). These gaps are not introduced by the merge, but the merge makes the checks apply — so they must be green before pushing. Confirm scope with the user before a large hardening pass.

Beware false positives: untracked nested vendor/ dirs and the local PHP extension set (a missing extension falls back to a possibly-outdated polyfill) can produce findings/failures that do not exist on a clean checkout / CI.

2d. Ask for confirmation before pushing

Show:

Merge: <SOURCE> → <TARGET>
Affected: <component list>
Tests: all passing

Commits since origin/<TARGET>:
git log --oneline origin/<TARGET>..<TARGET>

Ready to push? (yes / no)

Wait for confirmation. The user may make changes themselves before confirming.

2e. Push and continue

git push origin <TARGET>

If the push fails, stop and report the error.

Print "✓ <SOURCE> → <TARGET> done." and continue to the next pair.

---

Final summary

All merges complete:
  6.4 → 7.4  ✓
  7.4 → 8.0  ✓
  8.0 → 8.1  ✓

---

Gotchas

• CHANGELOG.md conflicts are the most common; entries must be kept from both sides, never dropped.
• A merge can introduce test failures even without conflicts, because behavior from the older branch may be incompatible with newer code. Always run tests.
• A clean (no-conflict) merge still needs verification, not just a commit: auto-merged test metadata (docblock vs attribute), security-guard slot indices, and CI version pins can each be wrong even when git reports no conflict.
• Some components have slow test suites. Only run tests for components with changed files, not the entire project.
• When the user states a constraint about the merge as a whole ("8.x stays on ext-redis 6"), it applies to the entire merge diff, not only to the files git flagged as conflicting. Grep the whole diff for the concept and check every hit, including root composer.json, static-analysis baselines, and other components' bridges. Auto-merged hunks are where a constraint like that gets lost silently.
• Resolving only the conflicted hunk of a file leaves the rest of it auto-merged. When the two sides restructured the same file, read the resolved file end to end before staging it, otherwise it can end up declaring the same thing twice or dropping a return.

Recurring CI failures that are not yours

These recur across runs and are unrelated to any merge. Re-run the job to confirm rather than investigating the component:

• Windows: AmpHttpClientTest idle timeouts on localhost:8057, and RedisException: Redis server went away in the Redis Messenger integration tests.
• Any job: composer aborting with curl error 60 ... SSL certificate problem, and PHPUnit dying in RecursiveDirectoryIterator on a vendor/composer/<hash> temp directory that vanished while it was walking the tree.
• Timing assertions that compare an elapsed duration against a bound (Failed asserting that 0.0 is greater than 0).

Before writing one off, check that the group meant to exclude it is actually excluded: a marker only takes effect if the job passes the matching --exclude-group, and if the TARGET runs PHPUnit 10+, only if the marker is an attribute rather than a doc-comment.

Error handling

• Never force-push or rewrite history.
• Never use --no-verify on commits.
• Never git add -A (or git add .) while resolving: it sweeps the user's untracked working files into the merge commit. Stage the files you resolved, by name.
• Never git reset in the middle of a merge: it deletes .git/MERGE_HEAD, and the commit that follows records a single parent, silently turning the merge into a squash.
• Never auto-recover from a failed git push or git pull. Stop and hand control back to the user.
• Never parallelize the cascade or run branches concurrently (e.g. via subagents): each merge depends on the previous one and shares the git working tree. Run strictly oldest to newest, one at a time.