gograbber

name	gograbber
description	Guide for executing the gograbber CLI tool for TCP port scanning, directory bruteforcing, and automated screenshotting of web targets. Use this skill when you need to run gograbber or discover web services across IPs, CIDR ranges, and URLs. Use when this capability is needed.
metadata	{"author":"bonzitechnology"}

Gograbber Execution Skill

This skill provides instructions for AI agents on how to construct commands and execute the gograbber CLI tool effectively.

Core Directives

1. Understand Input Types (-i vs -U):

   • Use -i <file> when you have raw IP addresses, CIDR ranges, or hostnames (e.g., 10.0.0.1, 10.0.0.0/24, example.com). These targets will be routed through the TCP port scanner first.
   • Use -U <file> when you have a list of fully qualified URLs (e.g., https://example.com:8443/admin). This completely bypasses the port scanner.
   • For single targets, use -u <url> (e.g., -u http://example.com).

2. Always Output Structured Formats:

   • By default, gograbber outputs Markdown. When acting as an agent, always append -f json or -f csv to generate machine-readable output that you can easily parse later.
   • Example: -f md,json,csv

3. Concurrency Safety:

   • gograbber is highly concurrent. The default threads are 500 (-t 500). For smaller networks or to avoid rate limits, lower this value (-t 50).
   • Limit the screenshot workers to avoid CPU/memory spikes. Default is 5 (-p_procs 5). Do not increase this excessively unless running on a high-resource server.

Recommended Workflows

1. The "Easy" Discovery Mode

If a user just wants a general scan of a target with standard web ports (80, 443, 8080, 8443) and screenshots, use -easy:

./gograbber -i targets.txt -w wordlist.txt -easy -f md,json

2. Comprehensive Subnet Scanning

To discover web services across a large CIDR range, specify the ports explicitly and enable all phases:

./gograbber -i 10.0.0.0/24 -p 80,443,8000,8080,8443 -scan -dirbust -w paths.txt -screenshot -f json,csv

3. Fast Screenshotting of Existing URLs

If you already possess a list of valid URLs (e.g., output from httpx), skip scanning and dirbusting, and go straight to screenshots:

./gograbber -U discovered_urls.txt -screenshot -f json

4. Bypassing WAFs / Rate Limits

When running against protected targets, slow down the requests (-j), add custom Host headers (-H), and supply a session cookie (-C):

./gograbber -i hosts.txt -dirbust -w paths.txt -screenshot -H vhosts.txt -C "sessionid=xyz123" -j 500

Parsing the Output

Once gograbber completes, it will write files to gograbber_output/report/. To read the results programmatically, load the JSON report:

cat gograbber_output/report/hack_*_Report.json | jq .

Each JSON object represents a Host and contains:

• protocol, host_addr, port, path
• screenshot_filename (path to the PNG/JPG file)
• response_body_filename (path to the raw HTML response)

---

Source: bonzitechnology/gograbber — distributed by TomeVault.