fireworks-agent

name	fireworks-agent
description	Run end-to-end fine-tuning on Fireworks via the Fireworks Agent (a.k.a. Pilot Agent, exposed through `firectl session`). Use this skill whenever the user asks to fine-tune, SFT, DPO, ORPO, post-train, custom-train, auto-train, hyperparameter-tune, or hp-sweep a model on Fireworks — including `qwen3-4b`, `qwen3-8b`, `qwen3p5-9b`, `qwen3p5-27b`, `qwen3p5-35b-a3b`, `llama-v3p3-70b-instruct`, `kimi-k2p5`, `kimi-k2p6`, `glm-5p1`, `qwen3p5-397b-a17b`, or any other Fireworks-hosted base model. Also use it for kicking off a training session, monitoring or resuming a session, answering the agent's mid-run questions, approving training plans, troubleshooting `failed` sessions, listing/cancelling/deleting sessions, and figuring out how to call a fine-tuned model after training. Triggers on commands like `firectl session create / get / events / list / update / cancel / delete`, on terms like "Pilot Agent", "Fireworks Agent", "auto-tune on Fireworks", "fine-tune on Fireworks", and on session IDs of the form `1779157376-41e1`. Runs read commands (`create`, `get`, `events`, `list`) autonomously; routes mutating commands (`update`, `cancel`, `delete`) through user confirmation because they spend real money and influence training decisions. Use when this capability is needed.
metadata	{"author":"fw-ai"}

Fireworks Agent

The Fireworks Agent is an autonomous fine-tuning agent exposed through firectl session. You give it a single natural-language instruction — "SFT qwen3-8b on my customer-support dataset" — and it:

1. Inspects the dataset (schema, size, distribution).
2. Picks or confirms a base model from the validated set.
3. Proposes a plan (model, dataset, LoRA config, eval path, cost estimate) and waits for your approval.
4. Runs training — a single LoRA job for smoke runs, a full hyperparameter sweep + promoted winner for larger runs.
5. Registers the fine-tuned model so it's immediately callable via the standard inference API (no separate deployment needed — served through implicit live-merge LoRA).
6. Writes a structured final report with model ID, losses, metrics URL, actual cost, and reproducible Python code.

It is interactive — at decision points (model/dataset/eval choices, plan approval, and for sweep runs the promotion gate) it pauses and asks you a question. Your job (or the assistant's) is to surface that question verbatim, get your answer, and send it back.

This skill is the operator's guide: how to start a session, stream events, answer the agent's questions, recover from failures, and clean up.

Two rules that govern everything below.

1. Session continuity. If you're resuming work on an existing session, always send follow-ups to that same <session-id> via session update. Never create a new session for a follow-up — it loses all prior context, restarts dataset inspection, and re-bills any setup work.
2. Confirmation rule for assistants. Read and initiation commands (create, get, events, list) are safe to run without asking. The three commands that have side effects — session update, session cancel, session delete — should be confirmed with the user first. update in particular sends a message directly to the training agent and influences how training proceeds (e.g. approving a plan starts spending real money on GPU time).

---

For coding agents (Claude / Cursor / Codex / etc.)

If you are an LLM agent reading this skill on a customer's machine, optimize for the patterns below. Humans can skip this section.

Session status state machine

A session moves through a small set of states. Use them to decide what to do next:

                    [user instruction]
                            │
                            ▼
                       ┌─────────┐
   ┌───────────────────▶ running │◀──────────────┐
   │   (session update) └────┬────┘              │
   │                         │                   │
   │       ┌─────────────────┼─────────────────┐ │
   │       │                 │                 │ │
   │       ▼                 ▼                 ▼ │
   │  ┌─────────┐       ┌──────────┐    ┌────────┴───┐
   └──┤ waiting │       │succeeded │    │   failed   │
      └─────────┘       └──────────┘    └────────────┘
       (terminal:        (terminal,      (terminal,
        loop back        Phase 5)         Phase 6)
        with update)

• running → keep streaming with events --wait.
• waiting → extract the ask_user block, present verbatim, get confirmation, send update -n once.
• succeeded / failed / cancelled → terminal. Do not try to update the session; create a new one if more work is needed.

Cost-ceiling heuristic

Every plan-approval waiting state contains an estimated-cost table. Parse it and:

• Estimate < $5: safe to auto-approve for an explicit smoke/CI flow when the user has already given a one-shot "go" earlier in the conversation.
• $5 – $50: always confirm with the user before sending Approved, proceed..
• > $50: confirm AND summarize the line items (model size, dataset rows, sweep grid breadth) — the cost is usually high because the agent picked a big sweep grid that can be narrowed.
• No cost table found in the waiting block: do not approve; ask the user or send "Please re-state the plan with an explicit cost estimate.".

Polling cadence and stuck detection

Sessions can stay in running for tens of minutes without visible progress (queue waits, dataset downloads, training time). Use:

• Stream with events --wait as your default — it's a long-poll that returns when state changes. Don't busy-loop session get.
• If events --wait returns before terminal state, the stream just dropped — re-issue it.
• Heuristic for "stuck": more than 10 minutes since the last status_info: line AND status is still running. Surface this to the user; do not auto-cancel.
• Hard ceiling: more than 2 hours total wall time on a small SFT, more than 8 hours on a sweep run — abnormal, surface and ask.

Don't do these things

Bad pattern	Why	Do instead
Create a new session to "retry the same question"	Loses context, double-bills setup	session update <same-id> -n "<corrected response>"
Auto-approve any plan above a few dollars	User loses cost control	Show the cost table, ask explicitly
Use --dry-run to "preview" a session	It actually creates and runs the session in the backend	Just print the instruction string to the user
Use -o json / --output json on any session command	Silently ignored; output is still text. The --output flag in the help is non-functional today	Parse the text with grep / awk / sed
Polish or paraphrase the agent's ask_user block before showing the user	The agent's wording sometimes encodes options the user needs to see verbatim	Forward the block as-is
Run two session update calls in parallel on the same session	Race condition in the agent's state	Always wait for the next waiting or [done] before the next update
Delete a failed session before reading its events	You lose the only forensic trail	events first, then optionally delete

Text-parsing recipes

There is no JSON output. Use these shell snippets verbatim:

# Extract session ID from `session create` stdout.
SESSION_ID=$(firectl session create --api-key $FIREWORKS_API_KEY -n "<instr>" \
              | awk '/^Session ID:/{print $3}')

# Get current status (one of: running, waiting, succeeded, failed, cancelled).
STATUS=$(firectl session get $SESSION_ID --api-key $FIREWORKS_API_KEY \
          | awk '/^Status:/{print $2}')

# Extract the latest `status_info` block (agent's current question or update).
firectl session events $SESSION_ID --api-key $FIREWORKS_API_KEY 2>/dev/null \
  | awk '/\] status_info:/{buf=""} {buf=buf"\n"$0} /\[done\] session status: waiting/{print buf}' \
  | tail -100

# After `succeeded`: extract the final fine-tuned model ID from the completion report.
MODEL_ID=$(firectl session events $SESSION_ID --api-key $FIREWORKS_API_KEY 2>/dev/null \
            | grep -oE 'accounts/[a-z0-9_-]+/models/[a-z0-9-]+' \
            | tail -1)

# After `succeeded`: extract the training job ID (alphanumeric, 8 chars).
JOB_ID=$(firectl session events $SESSION_ID --api-key $FIREWORKS_API_KEY 2>/dev/null \
          | awk -F'`' '/Training Job ID/{print $2}' | tail -1)

Pre-flight before session create

Run these three checks before spending compute on a new session. They take < 5 seconds total:

# 1. Key has Pilot scope (returns 403 if not).
firectl session list --api-key $FIREWORKS_API_KEY > /dev/null 2>&1 \
  || { echo "API key lacks Pilot scope"; exit 1; }

# 2. Account is implicit — discover what account this key is bound to.
# Service-account keys are tied to one account; this prints existing dataset names from that account.
firectl list datasets --api-key $FIREWORKS_API_KEY | head -3

# 3. (If the user named a specific dataset) confirm it's reachable on this account.
firectl get dataset <dataset-id> --api-key $FIREWORKS_API_KEY > /dev/null 2>&1 \
  || { echo "Dataset not reachable on this account"; exit 1; }

If your key is scoped to one account and the user wants a different account, pass -a <account-id> on every firectl call (don't try to rewrite ~/.fireworks/auth.ini).

Account discovery

There's no firectl whoami command. To figure out what account your key is bound to:

# Option A — cheapest. Get any dataset and read the full resource name.
DATASET=$(firectl list datasets --api-key $FIREWORKS_API_KEY 2>/dev/null \
            | awk 'NR>2{print $1; exit}')
ACCOUNT=$(firectl get dataset "$DATASET" --api-key $FIREWORKS_API_KEY 2>/dev/null \
            | awk '/^Name:/{split($2, a, "/"); print a[2]}')
echo "ACCOUNT=$ACCOUNT"

# Option B — for interactive `firectl auth login` flows only (service-account keys are opaque).
python3 -c "
import base64, json, configparser, os
c = configparser.ConfigParser()
c.read_string('[d]\n' + open(os.path.expanduser('~/.fireworks/auth.ini')).read())
t = c['d'].get('id_token', '')
if t:
    payload = t.split('.')[1] + '=='
    print(json.loads(base64.urlsafe_b64decode(payload))['fireworks_account'])
"

In practice, you can also just read the first event in the stream — the worker name is prefixed optimize-<account>-<session-id>-....

---

Task → command

Task	Command
Start a new fine-tuning session	§2 session create
Stream events from a running session	§3 session events --wait
Check the current status of a session	firectl session get <id>
Respond to a question the agent is waiting on	§4 session update -n ...
List all your sessions	§Reference: list
Stop a session that's running	§7 session cancel
Delete a session record	§7 session delete
Resume monitoring after a network drop	§3 fallback poll
Diagnose a failed session	§6 failure recovery
Replay history without retraining	firectl session events <id> (without --wait)

---

0. Prerequisites

You need:

• firectl installed and on your $PATH. See Fireworks CLI installation.

• A Fireworks API key with Pilot Agent scope. A regular user API key is not enough — calls will fail with HTTP 403: This scope requires specific permissions not present on your API key. You need a service-account key scoped to your account. Have an admin create one:

  firectl api-key create --service-account=<your-service-account>
  

  Save it to a .env file in your project (the rest of this skill assumes $FIREWORKS_API_KEY is set; some teams use $FIREWORKS_PILOT_KEY or $PI_API_KEY instead — pick a name your team understands):

  echo 'FIREWORKS_API_KEY=fw_...' >> .env
  source .env
  

• (Optional) A dataset already uploaded to Fireworks if you want supervised fine-tuning on your own data — the agent can also discover and pick one for you from the account. See Datasets.

• (Optional) An account override. Service-account keys are usually tied to one account. To run against a different account, pass -a / --account-id <acct> on any command, or set account_id in ~/.fireworks/auth.ini.

# Sanity check before doing anything else.
firectl session list --api-key $FIREWORKS_API_KEY
# Expect: a list (possibly empty) of sessions.
# If you get HTTP 403, your key doesn't have Pilot scope — see above.

Every command in this skill passes --api-key $FIREWORKS_API_KEY explicitly so it works whether your shell has the key in the environment or in a .env file you've sourced.

---

1. Decide on the instruction

The agent takes a single natural-language instruction. Be specific about three things if you know them; otherwise leave them out and the agent will ask or pick a sensible default:

• Task — "Run supervised fine-tuning", "DPO fine-tune", "Evaluate", etc.
• Model — e.g. "qwen3-8b", "llama-v3p3-70b-instruct". Use one of the supported names (see the tip below).
• Dataset — full resource name, e.g. "accounts/my-acct/datasets/customer-support-v3".

Good example:

"Run supervised fine-tuning on qwen3-8b using dataset accounts/my-acct/datasets/customer-support-v3"

Minimal example (the agent will ask you the rest):

"Fine-tune a small model on accounts/my-acct/datasets/customer-support-v3"

You do not need to pre-specify learning rate, batch size, number of epochs, LoRA rank, or hardware shape — the agent fills those in. For larger runs it runs a hyperparameter sweep and picks the winner; for small/smoke runs it uses sensible defaults straight away.

Discovering supported models. The agent only fine-tunes models on a curated list. If you don't know what's supported, just ask in your instruction ("What text models can you fine-tune?") — the agent prints its supported-models reference. As of writing, the smallest/cheapest options are qwen3-4b, qwen3-4b-instruct-2507, qwen3-8b, and qwen3p5-9b; large options include llama-v3p3-70b-instruct, kimi-k2p5, kimi-k2p6, glm-5p1, and qwen3p5-397b-a17b. The list evolves, so let the agent be the source of truth.

---

2. Create the session

firectl session create \
  --api-key $FIREWORKS_API_KEY \
  -n "Run supervised fine-tuning on qwen3-8b using dataset accounts/my-acct/datasets/customer-support-v3"

Flags:

Flag	Purpose
-n / --instruction (required)	The natural-language instruction.
--scope (default: optimize)	The agent scope. The Pilot/optimize scope is the only public one today.
-a / --account-id	Override the account from ~/.fireworks/auth.ini. Useful if your service-account key is scoped to a different account.

Avoid --dry-run. Despite the help text, --dry-run currently still creates and runs the session in the backend. If you want to verify your instruction before launch, just paste it into a comment or read it aloud — do not rely on --dry-run to be a no-op.

--output / -o is non-functional. The help text advertises text|json|flag but the flag is silently ignored — output stays in text format. Don't plan on JSON parsing; use the text recipes from the "For coding agents" section above.

The command prints a <session-id> (e.g. 1779157376-41e1). Save it — every subsequent command needs it.

---

3. Stream and monitor

Stream events live with --wait:

firectl session events <session-id> \
  --api-key $FIREWORKS_API_KEY --wait

--wait is required. Without it, the command dumps existing events and exits immediately. With it, the stream stays open until the session reaches a terminal state (succeeded, failed, cancelled) or pauses (waiting).

The full stream is very verbose — it includes every bash invocation the agent runs and its full output, often echoed multiple times. If you just want the human-readable narrative, pipe through a noise filter:

firectl session events <session-id> --api-key $FIREWORKS_API_KEY --wait \
  | grep -E "status_info|ask_user|\[done\]|error|failed|JOB_STATE"

What you'll see, roughly in order:

1. Dataset inspection — the agent lists datasets on the account, downloads candidates, inspects schema / row counts / sample previews.
2. Model resolution — confirms which base model and tokenizer will be used; if your requested model isn't supported, this is the first waiting state with a counter-offer (e.g. "qwen3-0.6b isn't supported, use qwen3-4b instead?").
3. Plan + cost — pauses with waiting, shows a plan table (model, dataset, LoRA rank, LR, epochs, eval path) plus an estimated cost. Approve to proceed.
4. Training — launches one or more training jobs and polls them. For a small / smoke run, this is one LoRA job; for a real run with a fresh dataset, the agent runs an HP sweep across LRs / ranks and then promotes the winner to a full training run (a second waiting state).
5. Final report — a structured markdown block with the fine-tuned model ID, job ID, final training and validation loss, metrics URL, an actual-vs-estimated cost table, and reproducible Python code to call the model.

Small smoke runs (≤ a few hundred rows, default config) tend to skip the HP sweep + promotion gate and go straight from plan approval → single training job → done. Large or unconstrained runs typically include the full sweep cycle.

Outcome routing:

• Stream exits with waiting → see §4 handle waiting states.
• Stream exits with succeeded → see §5 completion.
• Stream exits with failed → see §6 handle failures.

Fallback: poll with get

If the stream drops unexpectedly (network blip, laptop sleep, SSH disconnect), don't recreate the session — just poll status until it changes, then re-stream:

until firectl session get <session-id> --api-key $FIREWORKS_API_KEY 2>/dev/null \
        | grep -E "waiting|succeeded|failed|cancelled"; do
  sleep 10
done
firectl session get <session-id> --api-key $FIREWORKS_API_KEY

Then resume with firectl session events <session-id> --wait.

---

4. Handle waiting states

A waiting state means the agent has a question for you. This phase loops with §3 until the session reaches a terminal state.

Step 1 — capture the last event timestamp

Before doing anything else, record the timestamp of the last event currently in the stream. You'll use it to filter out history on the next stream so you don't re-read everything:

LAST_TS=$(firectl session events <session-id> --api-key $FIREWORKS_API_KEY 2>/dev/null \
  | grep -oE '^\[[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\]' | tail -1)

Step 2 — surface the agent's question exactly

Extract the last status_info block — everything from the final status_info line up to [done] session status: waiting:

firectl session events <session-id> --api-key $FIREWORKS_API_KEY 2>/dev/null \
  | awk '/\] status_info:/{buf=""} {buf=buf"\n"$0} /\[done\] session status: waiting/{print buf}'

Read the agent's question verbatim. Don't paraphrase — wording sometimes encodes specific options.

Step 3 — send your response

session update sends a message directly to the training agent and influences its decisions. Confirm the response with the user before running it.

firectl session update <session-id> \
  --api-key $FIREWORKS_API_KEY \
  -n "<your response>"

Note the flag is -n / --instruction (same name as on session create). There is no -i shorthand — calls with -i fail with unknown shorthand flag: 'i'.

Flags: -n / --instruction (required), --scope (default: optimize).

Heads-up: the agent may bundle multiple questions in one ask_user block. A typical first waiting state asks about model choice, dataset choice, and evaluation path all at once. Answer all of them in a single session update, e.g. "Yes use qwen3-4b. Pick any small dataset in the account. Path A (validation loss only) is fine.".

Common questions and good responses:

Question theme	Good response
"Which evaluation path — validation loss only, or a separate evaluator?"	"validation loss is fine" (skips evaluator setup)
"Here's the proposed plan — approve to proceed?"	"Approved, proceed."
"Sweep complete — promote the winning config?"	"Proceed with the winning config."
"Which dataset format — chat or text?"	Answer with the actual format of your file.
"What's your eval target — accuracy, F1, BLEU, custom?"	Be specific; the agent wires the evaluator to match.

Step 4 — resume streaming, filtered

After sending the update, stream again but drop everything at or before LAST_TS so the user only sees new traces:

firectl session events <session-id> --api-key $FIREWORKS_API_KEY --wait 2>/dev/null \
  | awk -v ts="$LAST_TS" '/^\[20/{show=($0>ts)} show{print}'

How the awk works:

• Lines that start with a timestamp ([2025-...): set show=1 if the line is newer than LAST_TS, else show=0.
• Continuation lines (no timestamp prefix): inherit show from the previous timestamped line — so multi-line status_info blocks aren't split.

This loop — stream → waiting → capture timestamp → surface question → get response → update → filtered stream — repeats until the session reaches succeeded, failed, or cancelled.

---

5. Completion

When status is succeeded, the agent writes a structured markdown report as the final stream output. Don't paraphrase it — it already contains everything you need. The report includes:

• Fine-tuned model ID (e.g. accounts/<acct>/models/qwen3-4b-smoke-lr15e5-lora8-1779158908).
• Training job ID (e.g. vfes4zbn) — needed for follow-up actions like firectl jobs get.
• Metrics URL — a GCS link to metrics.jsonl with per-step loss history.
• Final training and validation loss.
• Actual vs estimated cost with a percentage delta.
• A reproducible Python snippet for calling the new model.

What the report looks like (real run, smoke test, ~$0.37 actual)

## How To Access The Final Model

- Model ID:        accounts/pyroworks/models/qwen3-4b-smoke-lr15e5-lora8-1779158908
- Training Job ID: vfes4zbn
- Usage Note:      Served via implicit live-merge LoRA deployment on B200 x1.

## Training Metrics

| Metric                | Value  |
|-----------------------|--------|
| Final Training Loss   | 0.7044 |
| Final Validation Loss | 0.7771 |
| Training Duration     | ~5 min |

## Cost Summary

| Category  | Estimated | Actual | Delta |
|-----------|-----------|--------|-------|
| Inference | $0.00     | $0.00  | 0%    |
| Training  | $0.42     | $0.37  | -12%  |
| Total     | $0.42     | $0.37  | -12%  |

Calling the fine-tuned model

The agent recommends the Fireworks Python SDK (pip install fireworks-ai) — it handles auth and live-merge LoRA deployment transparently:

import os
from fireworks import Fireworks

client = Fireworks(api_key=os.environ["FIREWORKS_API_KEY"])
FINAL_MODEL_ID = "accounts/<acct>/models/<fine-tuned-model-id>"

response = client.chat.completions.create(
    model=FINAL_MODEL_ID,
    messages=[
        {"role": "system", "content": "You are a helpful assistant."},
        {"role": "user", "content": "Hello, how are you?"},
    ],
    temperature=0.0,
    max_tokens=512,
)
print(response.choices[0].message.content)

Or via curl:

curl https://api.fireworks.ai/inference/v1/chat/completions \
  -H "Authorization: Bearer $FIREWORKS_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "model": "accounts/<acct>/models/<fine-tuned-model-id>",
    "messages": [{"role": "user", "content": "Hello"}],
    "temperature": 0.0,
    "max_tokens": 512
  }'

Note on serving. Fine-tuned LoRA adapters are served through an implicit live-merge deployment on shared base-model hardware — you don't need to explicitly create a deployment for the fine-tuned model. The base model's serverless deployment merges the LoRA at request time. First request after long idle may be slightly slower (adapter warm-up).

For more on calling the deployed model, see Querying models.

---

6. Handle failures

When status is failed, the agent's last few status_info lines almost always contain a human-readable explanation — read them first before anything else:

firectl session events <session-id> --api-key $FIREWORKS_API_KEY 2>/dev/null \
  | grep -E "status_info|error|failed|JOB_STATE" | tail -30

Show the relevant lines to the user clearly. Do not retry automatically — the right path depends on the error class. Offer three options:

1. Retry — create a new session with the same instruction. Best for transient infra errors (job-pool exhaustion, GCS timeouts).
2. Modify and retry — adjust the instruction based on the error and create a new session. Best for anything in your control: "model not supported", "dataset not found", "schema mismatch", instruction ambiguity.
3. Abandon — cancel the failed session and clean up. Best when the workload simply doesn't fit (e.g. context length above what any supported shape can handle).

Known patterns

These are patterns reported in practice; treat them as starting hypotheses, not guarantees. Always confirm against the actual status_info and any error: lines in the stream.

Symptom in events	Hypothesis	First action
model not supported / not in the validated base model list	You named a base model that isn't on the agent's supported list (see readonly/skills/sft/references/base_models.md, which the agent will print on request)	Re-prompt with a supported model — qwen3-4b, qwen3-8b, qwen3p5-9b, llama-v3p3-70b-instruct, etc.
dataset not found / dataset access denied	Wrong account or dataset name in the instruction	firectl dataset list to find the right resource name
JOB_STATE_FAILED early after Launching SFT training job	Schema problem in the dataset (column names, JSON shape)	Re-prompt with a different dataset, or inspect locally with firectl dataset download
quota exceeded / 429	Account fine-tuning quota hit	Wait or contact Fireworks support
Long stall at Launching SFT training job then session times out	Training-pool queue full	Retry later; ephemeral
Session stays running for hours without a status_info update	Worker pool issue	Cancel + retry; if it keeps happening, contact Fireworks support with the session ID

---

7. Cancel or delete

Both commands need user confirmation before running.

Cancel stops a running session but keeps the record (you can still read events):

firectl session cancel <session-id> --api-key $FIREWORKS_API_KEY

Delete removes the session record entirely — irreversible:

firectl session delete <session-id> --api-key $FIREWORKS_API_KEY

Both accept --scope (default optimize).

---

Reference: list sessions

firectl session list --api-key $FIREWORKS_API_KEY

Flags:

Flag	Purpose
--filter	AIP-160 filter expression, e.g. status=waiting
--order-by	Field to sort by; append desc for descending
--no-paginate	Return all results without pagination
--page-size	Max results per page
--page-token	Specific page to fetch
--scope	Default optimize
Alias	ls

-o / --output is listed in the help but non-functional (see Phase 2 note). Output stays in text format.

Useful one-liner — find every session currently waiting on you:

firectl session list --api-key $FIREWORKS_API_KEY --filter "status=waiting"

---

Full example session

Start to finish, single SFT run. Tested end-to-end against a 500-row chat dataset on qwen3-4b. Actual run: estimated $0.42, actual $0.37, ~36 min wall clock (planning + ~5 min training):

# 0. Prereqs (service-account key with Pilot scope)
source .env                    # FIREWORKS_API_KEY=fw_...
firectl session list --api-key $FIREWORKS_API_KEY    # smoke check; expect a list, not 403

# 1. Create — single natural-language instruction
firectl session create --api-key $FIREWORKS_API_KEY \
  -n "Run supervised fine-tuning on qwen3-4b using a small chat dataset from the account."
# → Session ID: 1779157376-41e1

# 2. Stream events (low-noise view)
firectl session events 1779157376-41e1 --api-key $FIREWORKS_API_KEY --wait \
  | grep -E "status_info|ask_user|\[done\]|error|failed|JOB_STATE"
# → ... [done] session status: waiting

# 3. Surface the agent's first question and respond
firectl session events 1779157376-41e1 --api-key $FIREWORKS_API_KEY 2>/dev/null \
  | awk '/\] status_info:/{buf=""} {buf=buf"\n"$0} /\[done\] session status: waiting/{print buf}' \
  | tail -100
# (read the question, decide an answer)
firectl session update 1779157376-41e1 --api-key $FIREWORKS_API_KEY \
  -n "Yes use qwen3-4b. Pick any small dataset from the account. Path A (validation loss only) is fine."

# 4. Stream again until the plan-approval gate
firectl session events 1779157376-41e1 --api-key $FIREWORKS_API_KEY --wait \
  | grep -E "status_info|ask_user|\[done\]"
# → ... [done] session status: waiting   (plan + cost table shown)

firectl session update 1779157376-41e1 --api-key $FIREWORKS_API_KEY \
  -n "Approved, proceed."

# 5. Stream until succeeded (or background-poll while you do other work)
firectl session events 1779157376-41e1 --api-key $FIREWORKS_API_KEY --wait \
  | grep -E 




python - <<
import os
from fireworks import Fireworks

client = Fireworks(api_key=os.environ[])
resp = client.chat.completions.create(
    model=,
    messages=[{: , : }],
    temperature=0.0, max_tokens=128,
)
(resp.choices[0].message.content)
PY

---

Cheat sheet

The four commands you'll use 95% of the time:

# Start
firectl session create  --api-key $FIREWORKS_API_KEY -n "<instruction>"

# Watch (low-noise)
firectl session events <id> --api-key $FIREWORKS_API_KEY --wait \
  | grep -E "status_info|ask_user|\[done\]|JOB_STATE|error|failed"

# Respond when waiting
firectl session update  <id> --api-key $FIREWORKS_API_KEY -n "<response>"

# Status check
firectl session get     <id> --api-key $FIREWORKS_API_KEY

Helper to print just the agent's last question:

firectl session events <id> --api-key $FIREWORKS_API_KEY 2>/dev/null \
  | awk '/\] status_info:/{buf=""} {buf=buf"\n"$0} /\[done\] session status: waiting/{print buf}' \
  | tail -100

---

See also

• Fireworks Fine-Tuning docs — high-level overview of the fine-tuning surface.
• firectl reference — full CLI surface, including dataset, model, and deployment commands.
• skills/dev/SKILL.md — Training SDK power-user path (fork a recipe, run your own training loop, custom losses, RL, hotload).

---

Source: fw-ai/cookbook — distributed by TomeVault.