zw008

Use this skill whenever the user needs to manage VMs in VMware/vSphere/ESXi — it's the entry point for all VM operations. Directly handles: power on/off, clone, snapshot, migrate, deploy from OVA or templates, run commands inside VMs, batch operations, cluster management, vCenter alarm acknowledgment, a one-glance cluster-health triage ("is anything on fire?"), and VM/host/datastore investigation drill-downs. Always use this skill for any "power on", "clone", "deploy", "migrate", "batch", "guest exec", "alarm", or VM lifecycle task, and for triage like "is anything on fire" / "what needs attention now" / "investigate this VM", when the context is explicitly VMware, vSphere, or ESXi. Do NOT use for general read-only queries (inventory/events/VM details — use vmware-monitor), NSX networking (use vmware-nsx), storage/iSCSI/vSAN (use vmware-storage), or Kubernetes cluster lifecycle (use vmware-vks). For multi-step workflows use vmware-pilot. For load balancing/AVI/AKO use vmware-avi.

Use this skill for safe, risk-free queries of VMware infrastructure — code-level enforced safety means no destructive operations exist in the codebase. Directly handles: a one-glance cross-cluster health summary, object-centered VM/host/datastore investigation drill-downs (correlating surrounding infrastructure + recent events), a cross-vCenter "what needs attention now?" rollup, list VMs/hosts/datastores/clusters, active alarms, recent events, VM details. Always use vmware-monitor when the user asks to "list VMs", "check vSphere alarms", "show host status", "is anything on fire", "what needs attention now", "what is happening around this VM/host/datastore", "investigate this VM" — or needs read-only VMware info before making changes. Do NOT use for any write operations — this skill is code-level read-only and cannot modify, create, or delete any resource. For VM modifications use vmware-aiops, for networking use vmware-nsx, for metrics/capacity use vmware-aria. For load balancing/AVI/AKO use vmware-avi.

Use this skill whenever the user needs to manage VMware NSX networking — segments, gateways, NAT, routing, and IP pools. Directly handles: create/manage network segments, configure Tier-0/Tier-1 gateways, set up NAT rules, manage static routes, configure IP pools, check transport node and edge cluster health. Always use this skill for "create segment", "set up gateway", "create NAT rule", "check network health", "troubleshoot connectivity", or any NSX/networking/segment task. Do NOT use for DFW firewall rules or security groups (use vmware-nsx-security), VM lifecycle (use vmware-aiops), or AVI/ALB load balancing (use vmware-avi). For multi-step workflows use vmware-pilot.

Use this skill whenever the user needs to manage vSphere Kubernetes Service (VKS) — Supervisor clusters, vSphere Namespaces, and TKC cluster lifecycle. Directly handles: check VKS compatibility, create/delete namespaces, create/scale/upgrade/delete TKC clusters, get kubeconfig, check Harbor registry. Always use this skill for "create Kubernetes cluster", "scale workers", "upgrade K8s version", "create namespace", "get kubeconfig", or any VKS/TKC task. Do NOT use for vanilla VM operations (use vmware-aiops), non-vSphere Kubernetes (e.g., kubeadm, EKS, AKS), or AVI/AKO load balancing (use vmware-avi). For networking use vmware-nsx.

Use this skill whenever the user needs to manage VMware NSX security — distributed firewall (DFW) policies, security groups, microsegmentation, and IDS/IPS. Directly handles: create/manage DFW policies and rules, security groups, VM tags, network traceflow diagnostics, IDPS profiles and status. Always use this skill for "create firewall rule", "set up microsegmentation", "add VM to security group", "run traceflow", "check IDS status", or any NSX security/DFW task. Do NOT use for NSX networking operations like segments, gateways, NAT, or routing (use vmware-nsx), or VM lifecycle (use vmware-aiops). For load balancing/AVI/AKO use vmware-avi.

Use this skill whenever the user wants to design, execute, or manage complex multi-step VMware workflows with human approval and automatic rollback. Pilot is the orchestration brain — it breaks a goal into steps across companion VMware skills (aiops, monitor, nsx, nsx-security, aria, vks, storage, avi), adds approval gates before destructive operations, and rolls back automatically if anything fails. Always use vmware-pilot for: "clone and test before applying to production", "VMware incident response with checkpoints", "investigate alert root cause", "VMware rolling restart with health checks", "baseline capture and drift detection", "rolling maintenance with AVI drain", or any VMware workflow needing approval gates or rollback. 15 built-in templates + custom YAML + AI-designed workflows. Do NOT use for single-step work — use vmware-aiops for one VM action, vmware-monitor for read-only queries, vmware-avi for load balancer queries.

Use this skill whenever the user needs to perform VMware compliance auditing, baseline checking, or drift detection on vSphere/ESXi/NSX environments. Directly handles: CIS / vSphere SCG / 等保 2.0 三级 / PCI-DSS / BSI IT-Grundschutz / EU NIS2 scans; custom YAML baselines; LLM-driven remediation suggestions; web dashboard. Always use this skill for "scan compliance", "check baseline", "audit etcd", "check 等保", "drift detection", "compliance report" when the context is explicitly VMware/vSphere/ESXi. Do NOT use for general vSphere monitoring (use vmware-monitor or vmware-aiops), network changes (use vmware-nsx), or executing remediations directly (this skill only suggests; execution goes through vmware-pilot).

Use this skill whenever the user needs VMware Aria Operations data — performance metrics, alerts, capacity planning, anomaly detection, and automated reports. Directly handles: query resource metrics, list/acknowledge/cancel alerts, manage alert definitions, check capacity and time-remaining forecasts, detect anomalies, generate and manage reports. Always use this skill for "check vSphere capacity", "what Aria Operations alerts are active", "show VMware anomalies", "generate an Aria report", "rightsizing recommendations", or any Aria/vRealize Operations task. Combined with LLM, Aria data powers natural language reports: "give me a capacity report" → Aria collects data → LLM formats the report. Do NOT use for real-time vCenter alarms/events (use vmware-monitor), VM operations (use vmware-aiops), or NSX networking (use vmware-nsx). For load balancing/AVI/AKO use vmware-avi.

Use this skill whenever the user needs to manage VMware storage — datastores, iSCSI targets, and vSAN clusters. Directly handles: browse datastores, scan for deployable images (OVA/ISO), configure iSCSI adapters and targets, check vSAN health and capacity. Always use this skill for "list datastores", "add iSCSI target", "check vSAN health", "browse datastore files", "scan for OVA images", or any storage-related VMware task. Do NOT use for VM lifecycle operations (use vmware-aiops), NSX networking (use vmware-nsx), or Kubernetes clusters (use vmware-vks). For load balancing/AVI/AKO use vmware-avi.

Use this skill whenever the user mentions load balancing, ingress, virtual services, pool members, AVI, NSX ALB, AKO, or application delivery in a VMware/NSX ALB or Tanzu/vSphere Kubernetes context. Directly handles: virtual service listing and enable/disable, pool member drain/enable, SSL certificate expiry checks, analytics and error logs, service engine health, AKO pod troubleshooting, AKO Helm config management, Ingress annotation validation, K8s-to-Controller sync diagnostics, and multi-cluster AKO overview. Always use it for "virtual service", "pool member", "AKO status", "AKO logs", "ingress diagnose", "ssl expiry", "load balancer", "NSX ALB", "AVI controller", "AKO sync", or "负载均衡" tasks. Do NOT use to set up or configure nginx/HAProxy/Traefik from scratch — those are not AVI tasks. For VM lifecycle use vmware-aiops, for NSX networking use vmware-nsx, for Kubernetes cluster lifecycle (Supervisor/TKC) use vmware-vks.

Unified audit logging, policy enforcement, and input sanitization for the entire VMware MCP skill family. Use when querying audit logs, managing policy rules, or when any VMware skill needs audit/policy infrastructure. Provides the @vmware_tool decorator that wraps all 156+ MCP tools across 8 skills. Use when user asks to "show audit log", "check denied operations", "view policy rules", "audit stats", or "query audit trail". For VM lifecycle use vmware-aiops, for monitoring use vmware-monitor, for networking use vmware-nsx, for load balancing use vmware-avi.