菜单
IoT network traffic analyzer for detecting IoT protocols and identifying security vulnerabilities in network communications. Use when you need to analyze network traffic, identify IoT protocols, or assess network security of IoT devices.
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
基于 SOC 职业分类
Probe IoT/embedded targets for exposed SWD/JTAG debug interfaces using a SEGGER J-Link. Detects whether debug is OPEN, LOCKED (readout-protected), or DEAD (fused off). Use when assessing whether a target's on-chip debug port can be reached, identifying the silicon vendor from DPIDR/IDCODE, and confirming halt+memory access for full debugger control.
Use telnet to interact with IoT device shells for pentesting operations including device enumeration, vulnerability discovery, credential testing, and post-exploitation. Use when the user needs to interact with network-accessible shells, IoT devices, or telnet services.
Use picocom to interact with IoT device UART consoles for pentesting operations including device enumeration, vulnerability discovery, bootloader manipulation, and gaining root shells. Use when the user needs to interact with embedded devices, IoT hardware, or serial consoles.
Analyze digital and analog captures from Saleae Logic MSO devices. Decode protocols like UART, SPI, I2C from exported binary files. Use when analyzing logic analyzer captures for CTF challenges, hardware reverse engineering, or protocol decoding.
Static analysis of UEFI/BIOS firmware dumps using Intel's chipsec framework. Decode firmware structure, detect known malware and rootkits (LoJax, ThinkPwn, HackingTeam, MosaicRegressor), generate EFI executable inventories with hashes, extract NVRAM variables, and parse SPI flash descriptors. Use when analyzing firmware .bin/.rom/.fd/.cap files offline without requiring hardware access.
Android APK unpacking and resource extraction tool for reverse engineering. Use when you need to decode APK files, extract resources, examine AndroidManifest.xml, analyze smali code, or repackage modified APKs.
| name | iotnet |
| description | IoT network traffic analyzer for detecting IoT protocols and identifying security vulnerabilities in network communications. Use when you need to analyze network traffic, identify IoT protocols, or assess network security of IoT devices. |
You are helping the user analyze network traffic to detect IoT protocols and identify security vulnerabilities using the iotnet tool.
IoTNet analyzes network packet captures (PCAPs) or performs live traffic capture to:
When the user asks to analyze network traffic, capture IoT traffic, or assess network security:
Determine input type:
Gather requirements:
Execute the analysis:
Analyze one or more existing packet capture files:
iotnet capture1.pcap capture2.pcap
Capture and analyze traffic in real-time:
sudo iotnet -i eth0 -d 30
Input Options:
pcap_files: One or more PCAP files to analyze-i, --interface: Network interface for live captureFiltering Options:
--ip: Filter traffic by IP address-c, --capture-filter: BPF syntax filter for live capture--display-filter: Wireshark display filter for PCAP analysisLive Capture Options:
-d, --duration: Capture duration in seconds (default: 30)Analysis Options:
--config: Custom IoT detection rules configuration file
config/iot/detection_rules.json in the iothackbot directoryOutput Options:
--format text|json|quiet: Output format (default: text)-v, --verbose: Detailed outputAnalyze a packet capture file:
iotnet /path/to/capture.pcap
Live capture for 60 seconds on wifi interface:
sudo iotnet -i wlan0 -d 60
Analyze traffic for specific IP:
iotnet capture.pcap --ip 192.168.1.100
Live capture with BPF filter:
sudo iotnet -i eth0 -c "port 1883 or port 5683" -d 45
Multiple PCAPs with custom config:
iotnet file1.pcap file2.pcap --config custom-rules.json
Filter by display filter (Wireshark syntax):
iotnet capture.pcap --display-filter "mqtt or coap"
The tool can identify:
IoTNet identifies vulnerabilities such as:
Results include: