playwright-selectors

name

playwright-selectors

description

Best practices for writing reliable Playwright E2E tests and adding testID/aria-label selectors in Expo web applications using GlueStack UI and NativeWind. Use this skill when creating, debugging, or modifying Playwright tests, adding E2E test coverage, creating components that need test selectors, reviewing code for testability, or troubleshooting testID/data-testid issues. Trigger on any mention of Playwright, E2E tests, end-to-end tests, testID, data-testid, or GlueStack testing in an Expo web context.

Playwright E2E Testing for Expo + GlueStack UI

The #1 Rule: Browser First, Code Second

Before writing ANY Playwright test, open the target page in a browser and manually walk through the flow. Never write tests blind from code reading alone.

Expo/GlueStack apps have complex rendering pipelines — what you see in source code is not always what renders in the DOM. Components may have state-dependent behavior (a button that opens an actionsheet OR a confirm dialog depending on data), elements may live on different tabs than you expect, and testIDs may or may not forward to the web DOM depending on the component type.

Workflow for each new test

1. Navigate to the page using Playwright MCP browser tools
2. Click through the exact user flow the test will cover
3. Run document.querySelectorAll('[data-testid]') to see which testIDs are actually in the DOM
4. Note any conditional UI states, loading sequences, and tab navigation required
5. Then write the test code matching exactly what you observed

Verify testIDs before scaling

Before writing a batch of tests that depend on testIDs, verify ONE testID end-to-end:

// Run this in the browser console or via Playwright MCP evaluate
document.querySelectorAll('[data-testid]').length
// Should return > 0 after page fully loads

Accessibility snapshots from Playwright MCP may NOT show data-testid attributes. Always use document.querySelectorAll for ground truth. Pages may show very few testIDs before full render (e.g., 3 elements on initial load vs 80+ after data loads) — wait for the page to settle before checking.

---

Selector Strategy

Priority order

1. getByTestId — most stable, survives copy changes and redesigns
2. getByRole — good for interactive elements (button, tab, switch, heading)
3. getByLabel — form elements with labels
4. getByPlaceholder — inputs with placeholder text
5. getByText — fragile, use only when no testID or role is available

The generic web testing advice to prefer getByRole over getByTestId doesn't fully apply to React Native Web apps because ARIA role mapping is inconsistent across GlueStack components. testIDs are more reliable when properly set up.

// 1. Preferred — testID
await expect(page.getByTestId("settings:dark-mode-toggle")).toBeVisible();

// 2. Good — role + accessible name
await page.getByRole("button", { name: "Close dialog" }).click();

// 3. Good — placeholder
await page.getByPlaceholder("Search players...").fill("Messi");

// 4. Fallback — text (fragile)
await expect(page.getByText("Settings").first()).toBeVisible();

Fallback pattern for migration periods

When adding testIDs to components that are deployed separately from tests, use .or() to fall back gracefully:

// Works before AND after testID is deployed
const heading = page
  .getByTestId("feature:heading")
  .or(page.getByText("Feature Title").first());
await expect(heading.first()).toBeVisible();

Remove the .or() fallback once the testID is confirmed deployed and working.

---

testID Naming Convention

Use a namespaced pattern with colons as separators: screen:element

Format

{screen}:{element}

• screen: lowercase screen/feature name (e.g., home, profile, settings)
• element: lowercase element identifier (e.g., container, title, submit-button)

Examples

testID	Description
home:container	Main container on home screen
home:title	Title text on home screen
profile:avatar	User avatar on profile screen
settings:dark-mode-toggle	Dark mode toggle in settings
auth:login-button	Login button on auth screen

Rules

1. Use lowercase only
2. Use colons (:) to separate screen from element
3. Use hyphens (-) for multi-word elements
4. Be descriptive but concise
5. Avoid redundant words (e.g., home:home-title should be home:title)

---

testID Forwarding: Which Components Support What

This is the most critical technical knowledge for this stack. GlueStack UI components have different testID behavior depending on their render pipeline.

The render chain

React Native Web converts testID → data-testid through its createDOMProps function. But this only happens for components that go through RN Web's createElement path. GlueStack wraps many components with NativeWind utilities (withStyleContext, tva) that bypass this path.

Rules by component type

Component	testID approach	Why
Pressable (GlueStack)	testID={value}	Wraps RN Pressable → View → createDOMProps ✅
View (react-native)	testID={value}	Goes through createDOMProps ✅
Text (react-native)	testID={value}	Goes through createDOMProps ✅
Text (GlueStack @/components/ui/text)	{...{"data-testid": value}}	NativeWind wrapper renders <span>, bypasses createDOMProps
HStack / VStack / Box (GlueStack)	{...{"data-testid": value}}	Same — NativeWind wrapper bypasses pipeline
Heading (GlueStack)	data-testid={value}	Renders raw <h1>–<h6> HTML elements
Button (GlueStack)	Unreliable — verify first	May or may not forward depending on version
Third-party (e.g., BouncyCheckbox)	Usually not possible	Use text/role selectors instead

How to tell which path a component uses

Trace the component's render chain:

GlueStack Pressable → createPressable({ Root: withStyleContext(RNPressable) })
  → withStyleContext passes {...props} to RNPressable
  → RN Web Pressable renders <View {...rest}>
  → View goes through createElement → createDOMProps
  → createDOMProps converts testID → data-testid ✅

vs:

GlueStack Text → tva-styled component
  → Renders <span> or <p> directly
  → Never hits createDOMProps
  → testID prop is silently ignored ❌

Adding a testID to a new component

1. Check the component type against the table above
2. If it's a Pressable or RN View/Text, use testID={value} directly
3. If it's GlueStack Text, HStack, VStack, Box, use {...{"data-testid": value}}
4. If it's GlueStack Heading, use data-testid={value} as a JSX attribute
5. Build and verify in the browser before writing tests against it

// Pressable — testID prop works
<Pressable testID="feature:action-button" onPress={handlePress}>
  <Text>Click me</Text>
</Pressable>

// GlueStack Text — use data-testid spread
<Text {...{"data-testid": "feature:section-heading"}}>
  Section Title
</Text>

// GlueStack HStack — use data-testid spread
<HStack {...{"data-testid": "feature:row"}} className="items-center">
  <Icon as={Star} />
  <Text>Rating</Text>
</HStack>

// GlueStack Heading — use data-testid attribute
<Heading data-testid="feature:page-title" size="lg">
  Page Title
</Heading>

---

When to Add testID

Add testID To

1. Interactive elements that E2E tests will click/interact with
2. Key structural containers for page load verification
3. Dynamic content areas that change based on state
4. Form elements that lack semantic labels

Do Not Add testID To

1. Every element (over-testing creates maintenance burden)
2. Elements with good semantic selectors (use getByRole instead)
3. Decorative elements not needed for testing
4. Elements inside third-party components (may not propagate)

---

Accessibility Best Practices

Prefer semantic selectors and aria-labels over testID when possible. This benefits both testing and screen reader users.

aria-label for Testing and Accessibility

// Correct — benefits both testing and accessibility
<Pressable
  accessibilityLabel="Close dialog"
  onPress={handleClose}
>
  <XIcon />
</Pressable>

// E2E test uses accessible name
await page.getByRole("button", { name: "Close dialog" }).click();

accessibilityRole for Semantic Elements

// Correct — semantic role for assistive technology
<Box accessibilityRole="banner" testID="header:container">
  <Text accessibilityRole="heading">Welcome</Text>
</Box>

// E2E test can use role
await expect(page.getByRole("banner")).toBeVisible();
await expect(page.getByRole("heading", { name: "Welcome" })).toBeVisible();

---

CI Architecture: Test the PR's Own Code

Playwright must test against the code in the PR, not a remote deployed environment. If CI tests against a deployed app, new testIDs and component changes are invisible until deployed — creating a frustrating push-wait-fail cycle.

Expo web setup for CI

The CI pipeline should:

1. Build the web app: npx expo export --platform web (creates dist/)
2. Serve it locally: npx serve dist -l 8081 -s
3. Run Playwright against http://localhost:8081/

playwright.config.ts

import { defineConfig } from "@playwright/test";

export default defineConfig({
  // In CI, serve the static web build locally
  ...(process.env.CI
    ? {
        webServer: {
          command: "npx serve dist -l 8081 -s",
          port: 8081,
          reuseExistingServer: false,
        },
      }
    : {}),

  use: {
    baseURL: process.env.CI
      ? "http://localhost:8081/"
      : "https://dev.example.com/",
  },
});

---

Writing Robust Tests

Data independence

Never assert on data-dependent elements as required. The CI test user may have different data than your local environment.

// BAD — fails if test user has no data
const tableRows = page.locator("table tr");
await expect(tableRows.first()).toBeVisible();
expect(await tableRows.count()).toBeGreaterThan(1);

// GOOD — handles empty state gracefully
const tableRows = page.locator("table tbody tr");
const rowCount = await tableRows.count();
if (rowCount === 0) {
  await expect(page.getByPlaceholder("Search...")).toBeVisible();
  return;
}
await tableRows.first().click();

Timeouts

Use environment-aware timeouts from a shared constants file. CI runners are slower than local machines.

export const TIMEOUT = {
  test: isCI ? 90_000 : 60_000,
  expect: isCI ? 30_000 : 15_000,
  navigation: isCI ? 45_000 : 30_000,
};

// In tests — never hardcode
await expect(element).toBeVisible({ timeout: TIMEOUT.navigation });

Serial vs parallel mode

Use serial mode for tests that mutate shared backend state. Read-only tests can run in parallel.

test.describe("Feature with mutations", () => {
  test.describe.configure({ mode: "serial" });
});

State-dependent UI

Some UI elements behave differently depending on application state. Discover this during the browser-first step, then handle both cases:

const addButton = page.getByTestId("feature:add-button").first();
await expect(addButton).toBeVisible();

const modal = page.getByText("Add to List");
const isModalVisible = await modal.isVisible();

if (isModalVisible) {
  await page.getByText("Done").click();
} else {
  await expect(addButton).toBeVisible();
}

---

Common Pitfalls

SonarCloud security hotspots

These patterns trigger SonarCloud security hotspot warnings that block PR merges:

// BAD — triggers security hotspot
page.on("dialog", dialog => dialog.dismiss());
const result = await element.waitFor().catch(() => false);

// GOOD — use explicit checks instead
const isVisible = await element.isVisible();
const count = await elements.count();

Page not fully rendered

Always wait for a content-dependent element before asserting on testIDs:

// BAD — may run before page renders
const count = await page.evaluate(() =>
  document.querySelectorAll('[data-testid]').length
);

// GOOD — wait for known element first
await page.waitForLoadState("domcontentloaded");
const item = page.getByTestId("feature:item").first();
await item.waitFor({ state: "visible", timeout: 15000 });

Third-party component testIDs

Components from third-party libraries (e.g., react-native-bouncy-checkbox, react-native-gifted-chat) generally do NOT forward testID to the web DOM. Use text, role, or structural selectors for these.

---

Implementation Checklist

When adding E2E test coverage to a component:

• Open the page in a browser and walk through the flow first
• Run document.querySelectorAll('[data-testid]') to see existing testIDs
• Identify elements that need selectors for testing
• Check component type against the forwarding rules table
• Use namespaced testID pattern (screen:element) for elements without semantics
• Add accessibility labels where beneficial
• Verify testID propagates to data-testid on web before writing tests
• Use environment-aware timeouts, not hardcoded values
• Handle empty data states gracefully
• Document testIDs in component JSDoc preamble

Example Component

/**
 * Profile screen component.
 *
 * Test IDs for E2E testing:
 * - `profile:container` - Main container
 * - `profile:avatar` - User avatar image
 *
 * @module features/profile/screens/Main
 */
export const ProfileScreen = () => (
  <Box testID="profile:container" className="flex-1 p-4">
    <Image
      testID="profile:avatar"
      source={{ uri: user.avatarUrl }}
      accessibilityLabel={`${user.name}'s profile photo`}
    />
    <Text accessibilityRole="heading">
      {user.name}
    </Text>
    <Pressable
      accessibilityLabel="Edit profile"
      onPress={handleEdit}
    >
      <Text>Edit</Text>
    </Pressable>
  </Box>
);

Corresponding E2E Test

test.describe("Profile Screen", () => {
  test.use({ viewport: VIEWPORT.desktop });

  test.beforeEach(async ({ auth }) => {
    await auth.login();
  });

  test("displays user information", async ({ page }) => {
    await page.goto("/profile");
    await page.waitForLoadState("domcontentloaded");

    // Verify structural container
    await expect(page.getByTestId("profile:container")).toBeVisible();

    // Prefer accessible queries when available
    await expect(page.getByRole("heading")).toHaveText("John Doe");
    await expect(
      page.getByRole("button", { name: "Edit profile" })
    ).toBeVisible();

    // Use testID for elements without semantic roles
    await expect(page.getByTestId("profile:avatar")).toBeVisible();
  });
});