用 Codex 或 Claude 帮你安装 复制这段 Prompt,粘贴到 Codex、Claude 或其他助手里,让它检查 Skill 页面并帮你完成安装。
直接命令不会经过审查 Prompt;运行前请先检查来源。
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-gcp-cos-3-3-1-4命令会保持在同一行。复制前请横向滚动并检查完整内容。
想先保存到本地?可下载 SkillsMP 当前能够提供的文件。
正在显示 SKILL.md
macOS post-exploitation for credential harvesting, DTrace monitoring, TCC bypass, and stealth operations via native tools
Windows userland post-exploitation for credential harvesting, monitoring, AMSI/ETW bypass, and stealth operations
Kubernetes post-exploitation for container escape, secret extraction, RBAC abuse, and cluster persistence
基于 SOC 职业分类
| name | cis-gcp-cos-3.3.1.4 |
| description | Ensure IPv6 firewall rules exist for all open ports |
| category | cis-gcp-cos |
| version | 1.2.0 |
| author | cyberstrike-official |
| tags | ["cis","gcp","container-optimized-os","firewall","ip6tables","ipv6","network-security","open-ports"] |
| cis_id | 3.3.1.4 |
| cis_benchmark | CIS Google Container-Optimized OS Benchmark v1.2.0 |
| tech_stack | ["gcp","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
Any ports that have been opened on non-loopback addresses need firewall rules to govern traffic.
Without a firewall rule configured for open ports default firewall policy will drop all packets to these ports.
Changing firewall settings while connected over network can result in being locked out of the system.
Remediation will only affect the active system firewall, be sure to configure the default policy in your firewall management to apply on boot as well.
The remediation command opens up the port to traffic from all sources. Consult iptables documentation and set any restrictions in compliance with site policy.
Run the following command to determine open ports:
ss -6tuln
Example output:
Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
udp UNCONN 0 0 ::1:123 :::*
udp UNCONN 0 0 :::123 :::*
tcp LISTEN 0 128 :::22 :::*
tcp LISTEN 0 20 ::1:25 :::*
Run the following command to determine firewall rules:
ip6tables -L INPUT -v -n
Example output:
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all lo * ::/0 ::/0
0 0 DROP all * * ::1 ::/0
0 0 ACCEPT tcp * * ::/0 ::/0
tcp dpt:22 state NEW
Verify all open ports listening on non-localhost addresses have at least one firewall rule. The last line identified by the "tcp dpt:22 state NEW" identifies it as a firewall rule for new connections on tcp port 22.
All open ports listening on non-localhost addresses should have at least one corresponding firewall rule allowing inbound connections.
For each port identified in the audit which does not have a firewall rule establish a proper rule for accepting inbound connections:
ip6tables -A INPUT -p <protocol> --dport <port> -m state --state NEW -j ACCEPT
| Controls Version | Control | IG 1 | IG 2 | IG 3 |
|---|
| v8 | 4.4 Implement and Manage a Firewall on Servers - Implement and manage a firewall on servers, where supported. Example implementations include a virtual firewall, operating system firewall, or a third-party firewall agent. | x | x | x |
| v8 | 12.2 Establish and Maintain a Secure Network Architecture - Establish and maintain a secure network architecture. A secure network architecture must address segmentation, least privilege, and availability, at a minimum. | x | x | |
| v7 | 9.4 Apply Host-based Firewalls or Port Filtering - Apply host-based firewalls or port filtering tools on end systems, with a default-deny rule that drops all traffic except those services and ports that are explicitly allowed. | x | x | x |