菜单
Subscribe to all MQTT topics (`#`) on the configured broker and stream payloads for observation. Use when the user wants to see every message flowing through their broker, sniff activity, or find which topic a device publishes to. Requires `/mqtt-setup` to have been run previously.
默认使用会先检查来源的 Prompt；你也可以切换为直接命令，或下载本地副本。
决定是否安装前，请先阅读 SKILL.md，以及 SkillsMP 当前展示的配套文件。
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
直接命令不会经过审查 Prompt；运行前请先检查来源。
npx skills add https://github.com/danielrosehill/mqtt-observability-plugin --skill mqtt-monitor-all命令会保持在同一行。复制前请横向滚动并检查完整内容。
想先保存到本地？可下载 SkillsMP 当前能够提供的文件。
Subscribe to a specific MQTT topic or topic pattern (e.g. `zigbee2mqtt/#`, `home/livingroom/+/state`) on the configured broker and stream matching payloads. Use when the user wants to watch a single device, namespace, or subtree rather than all broker traffic. Requires `/mqtt-setup` to have been run previously.
Publish (send) a payload to a specific MQTT topic on the configured broker. Use when the user wants to trigger an automation, send a test message, control a Zigbee/Home-Assistant device, or inject a payload for debugging. Requires `/mqtt-setup` to have been run previously.
基于 SOC 职业分类
正在显示 SKILL.md
| name | mqtt-monitor-all |
| description | Subscribe to all MQTT topics (`#`) on the configured broker and stream payloads for observation. Use when the user wants to see every message flowing through their broker, sniff activity, or find which topic a device publishes to. Requires `/mqtt-setup` to have been run previously. |
Subscribe to the wildcard topic # on the user's configured broker and stream incoming messages.
Before anything else, source the credentials file:
if [ ! -f ~/.claude/plugins-data/mqtt-observability/credentials.env ]; then
echo "No MQTT credentials found. Run /mqtt-setup first." >&2
exit 1
fi
set -a; . ~/.claude/plugins-data/mqtt-observability/credentials.env; set +a
Use mosquitto_sub with verbose mode so topic names are printed alongside payloads:
mosquitto_sub -h "$MQTT_HOST" -p "$MQTT_PORT" \
${MQTT_USERNAME:+-u "$MQTT_USERNAME"} \
${MQTT_PASSWORD:+-P "$MQTT_PASSWORD"} \
-t '#' -v
Because this is a streaming command, run it with run_in_background: true and then use Monitor (or read the background output) to collect payloads. Ask the user how long to watch (default: 30 seconds) and then stop the background job.
If the user asks for a bounded capture, prefer timeout 30 mosquitto_sub ... so the command exits cleanly.
Summarise what was seen:
Don't dump thousands of raw lines into the conversation — group and summarise.
Requires mosquitto-clients. If missing, tell the user:
sudo apt install mosquitto-clients