一键在 Manus 中运行任何 Skill

pyfixest-cupy64-absorbed-regressors

星标1

分支0

更新时间2026年7月22日 09:34

pyfixest demeaner_backend="cupy64" (including its CPU fallback when cupy is absent) is NOT numerically identical to the default numba backend and does NOT drop fully-absorbed/collinear regressors the same way. Use when: (1) adding demeaner_backend="cupy64" to existing pf.feols/fepois calls changes the printed coefficient table, (2) a regression report suddenly gains rows with absurd estimates (e.g. coef 435.8, SE 7106) for controls absorbed by the fixed effects, (3) diffing outputs before/after a backend change, or (4) anything parses a pyfixest text report by line position.

安装

用 Codex 或 Claude 帮你安装复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。

在 Manus 中运行

来源

kennethkhoocy

kennethkhoocy/applied-micro-skills

打开 GitHub 仓库查看创作者相关仓库

下载

在 Manus 中运行

pyfixest cupy64 backend: absorbed regressors survive, reports change shape

Problem

Adding demeaner_backend="cupy64" to an existing pf.feols() call is treated as a pure performance switch, but it changes the output: regressors with zero within-FE identifying variation (fully absorbed by the fixed effects) that the default numba backend silently drops are RETAINED by the cupy64 path (also in its scipy/CPU fallback when cupy is not installed). They appear in the coefficient table as non-identified garbage (huge coefficient, huge SE).

Context / Trigger Conditions

Observed 2026-07-18 (Specialist Directors US, H5 re-baseline audit): adding the kwarg to 4 feols sites left the headline triple stable to 4 decimals (B1 diff 1.45e-6, SE diff 9.9e-6) but the text report grew from 366 to 390 lines — 24 new rows for absorbed controls (e.g. event_x_lrisk = 435.8059, SE 7106.3365) under firm-year + director FE, where firm-year-level variables have no identifying variation.

Solution

Treat a backend change as a POTENTIALLY OUTPUT-CHANGING edit: diff the report and expect schema changes, not byte equality. Verify the coefficients of interest at ~4-decimal precision instead.
Never interpret retained absorbed-regressor rows as estimates; check within-FE variation before reading nuisance coefficients.
Never parse pyfixest text reports by line position; anchor on the variable name of the coefficient you need.
When byte-stable reports matter (regression-tested pipelines), pin the backend consistently everywhere rather than mixing backends across runs.

Verification

Re-run one model with and without the kwarg; compare: headline coef equal to ~1e-6, coefficient-row sets DIFFERENT (absorbed regressors present only under cupy64). That asymmetry confirms this behavior rather than a data change.

Notes

Applies even with no GPU: the fail-open CPU fallback shows the same retention behavior, so "cupy isn't installed" does not make the kwarg inert.
The headline inference (identified coefficients, clustered SEs) agrees to reporting precision; this is a report-shape/nuisance-row issue, not a correctness issue for identified estimates.

同仓库更多 Skills

同仓库

adjudication-sheets

kennethkhoocy/applied-micro-skills

Build human adjudication / hand-labeling sheets from LLM-pipeline data without evidence truncation. Use when: (1) preparing a CSV/Excel sheet for a human to rule on cases an LLM classifier or rater panel judged, (2) a labeler reports "there is no information to label from" or cells look empty in Excel, (3) excerpt columns cluster at one exact length (e.g. all 1,500 chars — a hard truncation cap). Covers: full rating-basis recovery, Excel 32,767-char cell cap, multi-line CSV mangling, ruling dropdowns, companion text files.

2026-07-221

adversarial-empirical-review

kennethkhoocy/applied-micro-skills

N-round adversarial review pipeline for empirical research output — the chain from data to LaTeX tables to a manuscript that cites them. A Claude drafter proposes minimal diffs, a deterministic mechanical battery gates every diff from a clean state with a regression gate, a Codex reviewer files check-backed critiques, and a blind judge panel decides residual disputes. Manual-invoke ONLY: trigger when the user explicitly runs /adversarial-empirical-review or names 'adversarial-empirical-review' / 'adversarial empirical review'. Do NOT auto-trigger on generic 'review my results', 'check my tables', or manuscript-editing requests. For prose-style refinement use style-emulation instead; this skill AUDITS WHETHER THE TABLES ARE CORRECT — that each number in the tables is what the analysis code computes, reproduces from the data, and is internally consistent. It is an empirical + code review: the manuscript is read only to resolve table numbering, and prose is not examined.

2026-07-221

annotator-input-parity-check

kennethkhoocy/applied-micro-skills

Before designing, training, or auditing ANY model that replicates human-annotated labels, audit the annotation protocol's INPUT — the exact document/evidence the human labelers consulted — and give the model that same input. Use when: (1) designing a classifier/LLM extractor whose target is a hand-coded label set, (2) a label-replication model shows low recall concentrated in a label subset and the diagnosis on offer is "the label's information is not in the features", (3) reviewers propose construct splits (e.g. "designation vs record-evident"), adjudication sittings, or per-domain stop rules to explain residual disagreement with gold, (4) validating an extraction pipeline against labels transcribed from a source document. Symptom of the underlying failure: elaborate theory accumulates to explain why gold is "partially unpredictable" when the model was simply never shown the document the annotators read.

2026-07-221

asyncopenai-concurrency-httpx-pool

kennethkhoocy/applied-micro-skills

Raise real concurrency in asyncio LLM batch scorers built on the OpenAI SDK (AsyncOpenAI, including OpenAI-compatible providers like DeepSeek). Use when: (1) raising an asyncio.Semaphore above ~100 produces no throughput gain, (2) a batch pipeline saturates near 100 in-flight requests despite a larger semaphore, (3) planning a high-concurrency campaign against a provider with no hard rate limit (DeepSeek v4-flash tolerates 2000+ in flight). Root cause: AsyncOpenAI's default httpx pool caps max_connections at 100, silently bottlenecking any larger semaphore — you must pass a custom http_client with httpx.Limits sized to the semaphore.

2026-07-221

cite-placement

kennethkhoocy/applied-micro-skills

Place pre-screened literature citations into a LaTeX or Word manuscript, or restyle the citations already in one. Three modes: (1) inline placement — inline \cite{}/\citet{}/\citep{} with a compiled references.bib, for author-date journals (APA, MLA, Harvard, Chicago author-date, IEEE, Vancouver); (2) footnote placement — full formatted \footnote{} or OOXML footnotes for legal and notes styles (Bluebook, OSCOLA, Chicago, APA, McGill) with Id./supra short forms; (3) restyle — convert existing footnote citations from one style to another. This skill is manual-invoke ONLY — trigger ONLY when the user explicitly runs /cite-placement or explicitly names the "cite-placement" skill. Do NOT auto-trigger on general citation, footnote, or reference requests.

2026-07-221

download-gated-pdfs

kennethkhoocy/applied-micro-skills

Download the actual PDF binary from bot-gated sites (taxpolicycenter.org, urban.org, SSRN-hosted mirrors, think-tank/publisher sites) via the Wayback Machine id_ URL form. Use when: (1) curl/WebFetch of a .pdf URL returns HTML instead of a PDF even with a browser User-Agent, (2) pypdf fails with "invalid pdf header: b'<!DOC'" or "EOF marker not found" on a freshly downloaded file, (3) Firecrawl can parse the PDF to markdown but you need the original file on disk (e.g., filing a reference copy).

2026-07-221

name	pyfixest-cupy64-absorbed-regressors
description	pyfixest demeaner_backend="cupy64" (including its CPU fallback when cupy is absent) is NOT numerically identical to the default numba backend and does NOT drop fully-absorbed/collinear regressors the same way. Use when: (1) adding demeaner_backend="cupy64" to existing pf.feols/fepois calls changes the printed coefficient table, (2) a regression report suddenly gains rows with absurd estimates (e.g. coef 435.8, SE 7106) for controls absorbed by the fixed effects, (3) diffing outputs before/after a backend change, or (4) anything parses a pyfixest text report by line position.
author	Claude Code
version	1.0.0
date	"2026-07-18T00:00:00.000Z"

pyfixest cupy64 backend: absorbed regressors survive, reports change shape

Problem

Context / Trigger Conditions

Solution

Treat a backend change as a POTENTIALLY OUTPUT-CHANGING edit: diff the report and expect schema changes, not byte equality. Verify the coefficients of interest at ~4-decimal precision instead.
Never interpret retained absorbed-regressor rows as estimates; check within-FE variation before reading nuisance coefficients.
Never parse pyfixest text reports by line position; anchor on the variable name of the coefficient you need.
When byte-stable reports matter (regression-tested pipelines), pin the backend consistently everywhere rather than mixing backends across runs.

Verification

Notes

Applies even with no GPU: the fail-open CPU fallback shows the same retention behavior, so "cupy isn't installed" does not make the kwarg inert.
The headline inference (identified coefficients, clustered SEs) agrees to reporting precision; this is a report-shape/nuisance-row issue, not a correctness issue for identified estimates.