菜单
Build and flash firmware to a connected board (esp01s or esp32) via mise. Use when the user wants to upload/flash firmware to a device. Flashing mutates physical hardware over a serial port, so confirm the target board and port before running.
默认使用会先检查来源的 Prompt；你也可以切换为直接命令，或下载本地副本。
决定是否安装前，请先阅读 SKILL.md，以及 SkillsMP 当前展示的配套文件。
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
直接命令不会经过审查 Prompt；运行前请先检查来源。
npx skills add https://github.com/lmarqs/skills --skill pio-upload命令会保持在同一行。复制前请横向滚动并检查完整内容。
想先保存到本地？可下载 SkillsMP 当前能够提供的文件。
Scaffold or audit a project's mise task-runner setup the house-standard way — generates a lean mise.toml, directory-namespaced .mise/tasks/* scripts (tf:apply, node:setup), a project "mise" house-rules skill, and command-skills for destructive tasks; greenfield or brownfield (detect what's there, report drift, fix on approval). Advisory: recommends the standard, explains the tradeoffs, and lets you decide. A deliberate, roughly once-per-project setup action — invoke it explicitly with /scaffold when starting or standardizing a repo (terraform, python, node, go, localstack, docker-compose, aws, arduino/platformio). Not for everyday build/test/lint runs.
Apply Terraform changes for a module to live AWS infrastructure (S3 bucket, Lambda, etc.). Use when the user wants to apply, deploy, or provision infra for a module. Destructive: shows a plan and asks for confirmation before applying.
Show a Terraform plan for a module (the proposed changes to AWS infra) without applying. Use when the user wants to preview, diff, or dry-run infra changes for a module before deploying. Read-only — makes no changes.
基于 SOC 职业分类
正在显示 SKILL.md
| name | pio-upload |
| description | Build and flash firmware to a connected board (esp01s or esp32) via mise. Use when the user wants to upload/flash firmware to a device. Flashing mutates physical hardware over a serial port, so confirm the target board and port before running. |
| argument-hint | [esp01s|esp32] [--port <port>] |
Run mise run pio:upload <env> [--port <port>] to build and flash firmware.
mise run pio:upload esp32 --port /dev/ttyUSB0
mise run pio:upload esp01s # uses $PIO_PORT from .env.yaml
$ARGUMENTS for the board env (esp01s or esp32) and an optional --port.
$PIO_DEFAULT_ENV; if the port is omitted it falls
back to $PIO_PORT. Confirm which board and port will be used before flashing.mise run pio:upload <env> [--port <port>].