tunit

name	tunit
description	Write, run, or repair .NET tests that use TUnit. Use when a repo uses `TUnit`, `TUnit.Playwright`, `[Test]`, `[Arguments]`, `ClassDataSource`, `SharedType.PerTestSession`, or Microsoft.Testing.Platform-based execution. Preserve TUnit's parallel-by-default model and constrain only destructive shared-state collisions. DO NOT USE FOR: xUnit projects; MSTest projects.

TUnit

Trigger On

• the repo uses TUnit
• you need to add, run, debug, or repair TUnit tests
• the repo uses Microsoft.Testing.Platform-based test execution
• the repo uses ClassDataSource<...>(Shared = SharedType.PerTestSession), TUnit.Playwright, or --treenode-filter

Do Not Use For

• xUnit projects
• MSTest projects
• generic test strategy with no TUnit-specific mechanics

Inputs

• the nearest AGENTS.md
• the test project file and package references
• the repo's current TUnit execution command

Workflow

1. Confirm the project really uses TUnit and not a different MTP-based framework.
2. Read the repo's real test command from AGENTS.md. If the repo has no explicit command yet, start with dotnet test PROJECT_OR_SOLUTION.
3. Keep the TUnit execution model intact:
   • tests are source-generated at build time
   • tests run in parallel by default
   • on .NET 10, test modules also run in parallel by default up to Environment.ProcessorCount
   • built-in analyzers should remain enabled
4. Choose the fixture level deliberately:
   • plain TUnit tests for isolated logic
   • shared AppHost/Aspire fixtures for HTTP, SignalR, SSE, or UI flows
   • WebApplicationFactory layered over shared Aspire infra when tests need Host DI services, IGrainFactory, or other runtime internals
5. Reuse expensive fixtures with ClassDataSource<Fixture>(Shared = SharedType.PerTestSession) instead of booting distributed infrastructure per test. Fixture reuse does not serialize consumers: keep the fixture concurrency-safe and give each test unique mutable state.
6. Keep tests and test modules parallel. Do not add --max-parallel-test-modules 1, TUNIT_MAX_PARALLEL_TESTS=1, [assembly: NotInParallel], a class-wide [NotInParallel], or an equivalent global restriction.
7. Use keyed [NotInParallel("collision-domain")] only on the smallest tests that perform destructive changes to the same shared state and can corrupt one another. A shared read-only fixture, expensive startup, module boundary, or vague CI-stability concern is not a reason to limit parallelism.
8. Run the narrowest useful scope first with dotnet test ... --treenode-filter "..." on .NET 10. Use the older -- separator only when the repository is pinned to an SDK that requires it.
9. Capture useful failure evidence: host log dumps, focused console output, coverage files, and Playwright screenshots/HTML for UI tests.
10. Use [Test], [Arguments], hooks, and dependencies only when they make the scenario clearer, not because the framework allows it.

Bootstrap When Missing

If TUnit is requested but not configured yet:

1. Detect current state:
   • rg -n "TUnit|Microsoft\\.Testing\\.Platform" -g '*.csproj' -g 'Directory.Build.*' .
2. Add the minimal package set to the test project:
   • dotnet add TEST_PROJECT.csproj package TUnit
   • do not add Microsoft.NET.Test.Sdk to a current TUnit project; it selects the VSTest path and conflicts with the normal Microsoft.Testing.Platform setup
3. Keep the runner model explicit in AGENTS.md and CI:
   • record that the repo uses Microsoft.Testing.Platform-compatible execution for this test project
   • record the exact dotnet test TEST_PROJECT.csproj command the repo will use
4. Add one small executable test using [Test].
5. Run dotnet test TEST_PROJECT.csproj and return status: configured or status: improved.
6. If the repo intentionally standardizes on xUnit or MSTest, return status: not_applicable unless migration is explicitly requested.

Deliver

• TUnit tests that respect source generation and parallel execution
• commands that work in local and CI runs
• framework-specific verification guidance for the repo
• a fixture strategy that matches the actual test scope: logic-only, AppHost/API, Host DI/grains, or Playwright UI

Validate

• the command matches the repo's TUnit runner style
• focused runs use --treenode-filter rather than VSTest-style --filter
• .NET 10 runs pass MTP options directly without a -- separator
• no global or assembly-wide single-thread setting has been introduced
• any keyed non-parallel group is limited to tests with a named destructive shared-state collision
• shared distributed fixtures use SharedType.PerTestSession or an equivalent reuse pattern
• fixture and shared infrastructure are safe for concurrent consumers; mutable data is isolated per test
• built-in TUnit analyzers remain active
• coverage tooling matches Microsoft.Testing.Platform if coverage is enabled
• UI failures capture artifacts and server-side failures expose enough logs to avoid blind reruns

Test Harness

flowchart LR
  A["TUnit task"] --> B{"What does the test need?"}
  B -->|"Single component only"| C["Plain TUnit test"]
  B -->|"HTTP / SignalR / resource graph"| D["Shared Aspire/AppHost fixture"]
  B -->|"Host DI / grains / runtime services"| E["Shared Aspire/AppHost fixture + WebApplicationFactory"]
  B -->|"Browser automation"| F["Shared Aspire/AppHost fixture + Playwright"]
  C & D & E & F --> G["Run focused with --treenode-filter"]
  G --> H["Capture logs, artifacts, and coverage"]

Load References

• references/patterns.md
• references/migration.md
• references/tunit.md
• references/integration-testing.md

Running Tests

TUnit uses Microsoft.Testing.Platform. Use --treenode-filter for filtering, not VSTest --filter. On .NET 10, pass MTP switches directly; older SDKs may require --.

# Run all tests
dotnet test --solution MySolution.sln

# Run one test project
dotnet test --project tests/MyProject.Tests/MyProject.Tests.csproj

# Filter by class
dotnet test --project tests/MyProject.Tests/MyProject.Tests.csproj --treenode-filter "/*/*/CalculatorTests/*"

# Filter by category
dotnet test --project tests/MyProject.Tests/MyProject.Tests.csproj --treenode-filter "/*/*/*/*[Category=Integration]"

# Coverage on Microsoft.Testing.Platform
dotnet test --solution MySolution.sln --coverage --coverage-output coverage.cobertura.xml --coverage-output-format cobertura

# Raw runner help when the repo needs direct TUnit app switches
dotnet run --project tests/MyProject.Tests/MyProject.Tests.csproj -- --help

Filter syntax: /<Assembly>/<Namespace>/<Class>/<Test> with * wildcards. See references/patterns.md for full examples.

Example Requests

• "Run this TUnit project correctly."
• "Fix our TUnit CI command."
• "Add a regression test in TUnit without breaking parallelism."