network-bgp-diagnostics

name	network-bgp-diagnostics
description	Diagnostics-only BGP troubleshooting patterns for neighbor state, route exchange, prefix policy, AS path inspection, and safe evidence collection.
origin	community

Network BGP Diagnostics

Use this skill when a BGP session is down, flapping, established with missing routes, or advertising unexpected prefixes. The default workflow is read-only evidence collection; policy and reset actions belong in a reviewed change window.

When to Use

• BGP neighbors are stuck in Idle, Connect, Active, OpenSent, or OpenConfirm.
• A session is Established but expected prefixes are missing.
• A route-map, prefix-list, max-prefix limit, or AS path policy may be filtering routes.
• You need before/after evidence for a BGP change.
• You are reviewing automation that parses BGP summary output.

Read-Only Triage Flow

1. Identify the exact neighbor, address family, VRF, and local/remote ASNs.
2. Capture summary state and last reset reason.
3. Prove reachability to the peer source address.
4. Check route policy references before assuming transport failure.
5. Compare advertised, received, and installed routes where the platform supports those commands.

show bgp summary
show bgp neighbors <peer>
show ip route <peer>
show tcp brief | include <peer>|:179
show logging | include BGP|<peer>
show running-config | section router bgp
show ip prefix-list
show route-map

Use platform-specific address-family commands when the device uses VRFs, IPv6, VPNv4, or EVPN. Do not assume global IPv4 unicast.

State Interpretation

State	First checks
Established with prefix count	Route exchange is up; inspect policy and table selection
Established with zero prefixes	Check inbound policy, max-prefix, advertised routes, and AFI/SAFI
Active	TCP session is not completing; check routing, source, ACLs, and peer reachability
Connect	TCP connection is in progress; check path and remote listener
OpenSent/OpenConfirm	TCP works; check ASN, authentication, timers, capabilities, and logs
Idle	Neighbor may be disabled, missing config, blocked by policy, or backoff timer

Transport Checks

ping <peer> source <local-source>
traceroute <peer> source <local-source>
show ip route <peer>
show bgp neighbors <peer> | include BGP state|Last reset|Local host|Foreign host

If the peer is sourced from a loopback, confirm both directions route to the loopback addresses and that the neighbor config uses the expected update source.

Avoid disabling ACLs or firewall policy as a diagnostic shortcut. Read hit counters, logs, and path state first.

Route Policy Checks

show bgp neighbors <peer> advertised-routes
show bgp neighbors <peer> routes
show ip prefix-list <name>
show route-map <name>
show bgp <prefix>

Some platforms require additional configuration before received-routes is available. Do not add that configuration during incident triage unless the operator approves the change.

AS Path And Prefix Review

show bgp regexp _65001_
show bgp regexp ^65001$
show bgp <prefix>
show bgp neighbors <peer> advertised-routes | include Network|Path|<prefix>

Use AS-path regex carefully. _65001_ matches AS 65001 as a token. Plain 65001 can match longer ASNs or unrelated text.

Parser Pattern

import re
from typing import Any

BGP_SUMMARY_RE = re.compile(
    r"^(?P<neighbor>\d{1,3}(?:\.\d{1,3}){3})\s+"
    r"(?P<version>\d+)\s+"
    r"(?P<remote_as>\d+)\s+"
    r"(?P<msg_rcvd>\d+)\s+"
    r"(?P<msg_sent>\d+)\s+"
    r"(?P<table_version>\d+)\s+"
    r"(?P<input_queue>\d+)\s+"
    r"(?P<output_queue>\d+)\s+"
    r"(?P<uptime>\S+)\s+"
    r"(?P<state_or_prefixes>\S+)$",
    re.M,
)

def parse_bgp_summary(raw: str) -> list[dict[str, Any]]:
    rows = []
    for match in BGP_SUMMARY_RE.finditer(raw):
        state_or_prefixes = match.group("state_or_prefixes")
        if state_or_prefixes.isdigit():
            state = "Established"
            prefixes_received = int(state_or_prefixes)
        else:
            state = state_or_prefixes
            prefixes_received = None
        rows.append({
            "neighbor": match.group("neighbor"),
            "remote_as": int(match.group("remote_as")),
            "state": state,
            "prefixes_received": prefixes_received,
            "uptime": match.group("uptime"),
        })
     rows

Prefer structured parser output when available, but store raw output with the incident record because BGP summary formats vary by platform and address family.

Change-Window Only

These actions can affect routing and should not be suggested as automatic diagnostics:

• Clearing a BGP session.
• Changing neighbor authentication, timers, update source, route-maps, or prefix-lists.
• Enabling additional received-route storage.
• Relaxing firewall, ACL, or control-plane policy.

If a reset is approved, prefer the least disruptive soft or route-refresh option supported by the platform and document exactly why it is safe.

Anti-Patterns

• Assuming Active always means the remote side is down.
• Ignoring VRF, address family, or update-source differences.
• Using broad AS-path regex without token boundaries.
• Hard-resetting a peer before reading last reset reason and logs.
• Treating missing received-routes output as proof that no routes arrived.

See Also

• Skill: cisco-ios-patterns
• Skill: network-config-validation
• Skill: network-interface-health