rust-p2p

name	rust-p2p
description	Use when implementing, reviewing, debugging, or explaining Pluto Rust libp2p code: Node/P2PContext ownership, PlutoBehaviour composition, NetworkBehaviour and ConnectionHandler protocols, relay/force-direct/quic-upgrade behaviours, peerinfo/parsigex protocol handlers, DKG protocol handlers, and P2P tests.

Rust P2P

Use this skill for Pluto Rust libp2p work. Bias toward the existing networking architecture; do not invent a parallel swarm, context, or handler model.

Start Here

Classify the task and read the matching implementation first.

Area	Files	Look for
Node runtime	crates/p2p/src/p2p.rs	Node, builder closure, listen/dial setup
Shared peer state	crates/p2p/src/p2p_context.rs	local peer binding, known peers, peer store
Common wrapper	crates/p2p/src/behaviours/pluto.rs	common behaviours plus inner
Connection tracking	crates/p2p/src/conn_logger.rs	peer-store updates on connection lifecycle
Connection gating	crates/p2p/src/gater.rs	allow/deny policy
Bootnode	crates/p2p/src/bootnode.rs	bootnode run loop and shutdown
Relay	crates/p2p/src/relay.rs	reservations and relay-route dialing
Direct routing	crates/p2p/src/force_direct.rs	direct-connection enforcement
QUIC upgrade	crates/p2p/src/quic_upgrade.rs	TCP-to-QUIC retry/close flow
Optional wrapper	crates/p2p/src/behaviours/optional.rs	enabled/disabled behaviour routing
Framing	crates/p2p/src/proto.rs	protobuf read/write helpers and limits
Peer info	crates/peerinfo/src/	simple behaviour/handler protocol
Parsigex	crates/parsigex/src/	handle -> behaviour -> handler broadcast protocol
DKG broadcast	crates/dkg/src/bcast/	command-driven behaviour/handler protocol
DKG sync	crates/dkg/src/sync/	long-lived stream, waiters, cancellation
Examples	crates/*/examples/	expected public construction patterns

Before editing, draw the ownership path for the specific protocol:

application / protocol flow
  |
  | handle, command channel, waiter, or event consumer
  v
feature Behaviour             shared P2PContext
  |                            ^
  | ToSwarm::{Dial, ListenOn,  | conn_logger + identify update it
  | NotifyHandler, GenerateEvent}
  v
PlutoBehaviour wrapper
  |
  v
libp2p Swarm
  |
  | connection events + negotiated substreams
  v
feature ConnectionHandler
  |
  | async stream read/write futures
  v
protocol state / protocol event

Core Ownership

• Node owns the Swarm.
• PlutoBehaviour<B> wraps common networking behaviours around feature behaviour B.
• One node must have one canonical P2PContext shared by Node, PlutoBehaviour, and inner behaviours that read peer state.
• Feature Behaviour owns swarm-level protocol orchestration.
• Feature ConnectionHandler owns one connection's negotiated streams.
• User-facing handles do not own the swarm; they use channels, waiters, shared protocol state, or emitted events.

Node And Context

Use Node::new for normal client nodes. It builds TCP/QUIC transports and includes relay-client support. Use Node::new_server for server-style nodes that should not include relay-client behaviour.

Rules:

• Pass the intended P2PContext into Node construction.
• Inside the builder closure, use builder.p2p_context() for inner behaviours that need peer state.
• Do not create a fresh/default P2PContext inside a node builder closure.
• Treat P2PContext::default() as only suitable at standalone node construction when no known-peer state is needed and no component must share peer state.
• Do not reintroduce replaceable-context APIs after the builder is created.
• Let Node bind the local peer ID and preserve LocalPeerIdMismatch fail-fast behaviour.
• filter_private_addrs affects advertised addresses, not listen addresses.

P2PContext is for runtime peer connectivity:

• known peer set,
• local peer ID once bound,
• active/inactive connection records,
• peer addresses learned from identify.

Do not store protocol progress in P2PContext.

Critical failure mode: if conn_logger writes context A while an inner behaviour reads context B, the inner behaviour will treat connected peers as disconnected.

PlutoBehaviour

PlutoBehaviour<B> composes common behaviour with feature behaviour:

• conn_logger: lifecycle logging, peer-store updates, metrics,
• gater: connection allow/deny policy,
• identify: address/protocol exchange; Node stores listen addresses,
• ping: latency/keepalive metrics,
• autonat: reachability,
• quic_upgrade: optional TCP -> QUIC upgrade attempts,
• inner: feature-specific behaviour.

Composition invariant: #[derive(NetworkBehaviour)] delegates behaviour methods in struct field order. Keep conn_logger before behaviours that may read P2PContext.peer_store, so connection events update shared peer state before later fields handle the same swarm event or get polled afterward.

Behaviour Pattern

A feature Behaviour is a swarm-level coordinator.

Common responsibilities:

• receive user commands through tokio::sync::mpsc,
• queue ToSwarm events in VecDeque,
• create a real handler for peers in protocol scope,
• return dummy::ConnectionHandler when the behaviour has no per-connection protocol work or when a peer is out of scope,
• inspect FromSwarm connection/dial events,
• poll retry/routing timers,
• translate handler events into feature events.

poll rules:

• never .await,
• never block,
• never spin on an immediately failing condition,
• drain ready commands before sleeping,
• emit at most one queued ToSwarm event per poll,
• return Poll::Pending when no work is ready.

Use ToSwarm::NotifyHandler when an existing handler should open a substream. Use ToSwarm::GenerateEvent for application-visible events.

Handler Pattern

A ConnectionHandler is per connection, not per peer.

Common responsibilities:

• define inbound and outbound protocol upgrades,
• handle FullyNegotiatedInbound by starting inbound stream work,
• handle FullyNegotiatedOutbound by starting matching outbound stream work,
• report results with ConnectionHandlerEvent::NotifyBehaviour,
• request outbound streams with ConnectionHandlerEvent::OutboundSubstreamRequest,
• translate negotiation, timeout, and I/O failures into typed protocol failures.

Do not block in handler poll. Store async stream work as boxed futures or a FuturesUnordered, then poll them.

Do not assume only one handler exists for a peer. If a protocol requires one outbound loop per peer, keep an explicit claim in shared protocol state and release it on every terminal path.

Handles, Waiters, Cancellation

Keep user-facing APIs small and keep swarm internals inside Node.

Existing shapes:

• command handle -> mpsc -> behaviour (parsigex::Handle, bcast::Component, sync::Client),
• behaviour event -> caller observes completion/failure (parsigex, bcast),
• shared protocol state -> wait API (sync::Server).

Waiter rules:

• Use Notify to wake waiters after state changes.
• Check terminal error and cancellation before awaiting another notification.
• Use CancellationToken for long-running waits and protocol tasks that must stop during shutdown.
• Tests around waiters should still use tokio::time::timeout; cancellation is part of the contract, not a replacement for test bounds.

Stream And Framing

Choose the protocol primitive intentionally:

• one stream protocol -> ReadyUpgrade<StreamProtocol>,
• multiple stream protocols on one handler -> SelectUpgrade,
• request/response over a negotiated stream -> helpers in pluto_p2p::proto.

Framing variants:

• varint length framing: write_protobuf / read_protobuf_with_max_size,
• fixed i64 little-endian length framing: write_fixed_size_protobuf / read_fixed_size_protobuf_with_max_size.

Safety rules:

• Use explicit protocol-specific max sizes where practical.
• Do not allocate from an untrusted frame length before checking the max.
• Add per-message tokio::time::timeout when a slow peer can otherwise hold a stream task indefinitely.
• Preserve io::ErrorKind until retry/terminal decisions are made.

Dialing And Retry

Prefer swarm-owned dialing through ToSwarm::Dial.

Use PeerCondition::DisconnectedAndNotDialing when activation should not open duplicate dials.

Typical dial-failure handling:

• Transport(_): retry only if the protocol still wants reconnect.
• NoAddresses: retry only after a delay; identify, relay routing, or bootstrap may populate addresses later.
• DialBackoff: usually let libp2p backoff stand unless the protocol has a specific recovery path.
• NegotiationFailed: usually terminal for that stream protocol; the peer does not support it.

Reconnect loops need a wakeup path. If a handler releases an outbound claim, ensure another handler can eventually retry by timer, notification, or a new swarm event.

Relay And Routing

Relay reservation and relay routing are separate:

• MutableRelayReservation dials relay servers directly, waits for relay connection establishment, then listens on /p2p-circuit addresses.
• RelayRouter periodically builds relay circuit addresses for known peers and queues dials through those relays.

Address rules:

• Dialing a relay server directly: append /p2p/<relay-id>, not /p2p-circuit.
• Listening through a relay or dialing a target through a relay: include /p2p-circuit.
• Do not assume relay peer data is available at startup; mutable relay peers can resolve later.

Testing

Use the smallest test that exercises the real boundary.

Good boundaries:

• behaviour queueing/retry: unit-test NetworkBehaviour::poll with noop_waker_ref,
• handler state machines: poll handlers/futures directly where possible,
• real connectivity: use Node and real swarms,
• multi-swarm tests: use #[tokio::test(flavor = "multi_thread")],
• async barriers and shutdown: wrap waits in tokio::time::timeout,
• ports: prefer /ip4/127.0.0.1/tcp/0 plus SwarmEvent::NewListenAddr.

Regression tests should cover the contract boundary:

• success path,
• error propagation to waiters or events,
• cancellation/teardown,
• retry or dial-failure behaviour,
• protocol validation failure for authenticated peers.