pr-watch-fix

name	pr-watch-fix
description	Watch the GitHub PR for the current branch, wait for CI to finish, and autonomously fix failing jobs by reading logs, editing sources, and pushing. Stops cleanly when stuck.
allowed-tools	Bash Read Grep Glob Edit Write AskUserQuestion Agent
user-invocable	true
model	sonnet

Watch the open PR for the current branch, wait for CI, and fix failures.

You are the orchestrator. You run on Sonnet and stay light: you coordinate, wait, ask the user when needed, and report. You delegate the two heavy parts to subagents (this is what keeps token usage down):

• Collecting PR state and failing logs -> the pr-watch agent (Haiku). Cheap, mechanical gh/jq/log work. Spawn it via the Agent tool each time you need a fresh snapshot.
• Analyzing and fixing failures -> the pr-fix agent (Opus). It diagnoses, edits sources, validates, commits and pushes. Spawn it via the Agent tool when there are failures.

The waiting between cycles uses a persistent Monitor (cheap bash polling, no model cost). Interactive questions to the user happen here in the orchestrator, because a subagent cannot talk back to the user - pr-fix returns a NEEDS-USER-INPUT block and you turn that into an AskUserQuestion.

Loop

Repeat until the PR is fully green or you stop intentionally.

0. Stop any prior PR-watch Monitor

Re-invoking /pr-watch-fix always wins. Use TaskList to find Monitors whose description starts with PR watch: and call TaskStop on each. Do not stop tasks that don't start with this prefix - they belong to other work.

1. Find the PR

BRANCH="$(git branch --show-current)"
PR_JSON="$(gh pr list --head "$BRANCH" --state open --json number,url,headRefOid --limit 1)"
PR_NUMBER="$(printf '%s' "$PR_JSON" | jq -r '.[0].number // empty')"

If PR_NUMBER is empty -> STOP. Tell the user there is no open PR for the branch. Save the PR URL and headRefOid.

2. Collect CI state (delegate to pr-watch)

Spawn the pr-watch agent (Haiku) via the Agent tool, passing the PR number and branch. It returns a structured snapshot: state (green / failures / running / no-pr), the still-running count, and for each failure the job, workflow, errorType, and key log lines.

Trust its state, but remember the rule it encodes: "done" requires BOTH zero pending checks AND zero still-running runs for the current HEAD SHA (a fresh run can lag 30-90s before registering as a check).

3. Act on the state

• green -> STOP. Report success and the PR URL.
• failures -> go to step 5 (fix).
• running -> go to step 4 (wait).

4. Wait for running jobs

Poll every 5 minutes, fixed interval, no backoff - the user wants a 5-minute cadence so failures surface fast. Use a persistent Monitor with a description starting with PR watch: so step 0 of a future invocation can find and stop it. The Monitor does plain gh/jq polling (no model) and emits only on state changes (new failures or completion), not every 5 minutes.

Monitor:
  description: "PR watch: PR #123 CI"
  persistent: true
  command: |
    while true; do
      checks="$(gh pr checks 123 --json name,bucket 2>/dev/null || echo '[]')"
      runs="$(gh run list --branch BRANCH --limit 20 --json status,conclusion,name 2>/dev/null || echo '[]')"

      counts="$(jq -r '[.[] | .bucket] | group_by(.) | map("\(.[0])=\(length)") | join(" ")' <<<"$checks")"
      pending_checks="$(jq -r '[.[] | select(.bucket=="pending")] | length' <<<"$checks")"
      pending_runs="$(jq -r '[.[] | select(.status=="in_progress" or .status=="queued" or .status=="requested" or .status=="waiting" or .status=="pending")] | length' <<<"$runs")"
      fail_now="$(jq -r '[.[] | select(.bucket=="fail" or .bucket=="cancel") | .name] | sort | join(",")' <<<"$checks")"

      if [ -n "$fail_now" ] && [ "$fail_now" != "${prev_fail:-}" ]; then
        echo "[failures] $fail_now ($counts)"
        prev_fail="$fail_now"
      fi

      if [ "$pending_checks" = "0" ] && [ "$pending_runs" = "0" ]; then
        echo "[final] checks: $counts | runs: 0 in-progress"
        break
      fi
      sleep 300
    done

Replace BRANCH and the PR number when instantiating. When the Monitor wakes you (state change or completion), go back to step 2 and re-collect with pr-watch.

If the same check has been pending more than 30 minutes without a state change, the Monitor must emit a [stalled] event and you should ask the user whether to keep waiting. (The cross-platform test matrix - especially the Windows runner downloading a JRE - can legitimately take 10-15 min; MegaLinter a few more. Don't panic early.) Do not poll faster than 5 minutes.

5. Fix the failures (delegate to pr-fix)

Spawn the pr-fix agent (Opus) via the Agent tool. Pass it the branch, PR number, current HEAD SHA, and the failure list from pr-watch (job names, error types, key log lines). pr-fix owns the diagnosis, the fix, local validation (yarn test / yarn lint / yarn docs), and the commit + push (including the MegaLinter --force-with-lease reconcile and all the git-safety rules).

pr-fix returns one of:

• A fix report (job fixed, root cause, files changed, new HEAD SHA pushed) -> note the new SHA, sleep ~60s for GitHub to register new runs, then go back to step 2.
• A NEEDS-USER-INPUT block (ambiguous cause, likely flake, fork-PR error, generated-artifact edit like DOCS.md, non-bot commits on origin, more than 3 cycles without progress) -> do not loop. Turn it into an AskUserQuestion: show the failing job, the key error line, the agent's hypothesis, and offer its 2-3 options plus "stop and let me investigate". Wait for the user.

6. Loop

Go back to step 1. The loop ends when:

• All checks pass -> success report.
• You asked the user a question (loop pauses until they answer).
• pr-fix reported it hit the 3-cycle cap without progress -> ask before continuing.
• The user interrupts.

Reporting

Each time you wake from a poll or finish a fix cycle, give the user one short line:

Cycle 2: Test (windows-latest) failed (assertion in tests/test.js:42), pushed e0a44f1. Waiting 5m.

Do not paste full job logs into the conversation. Summarize and link to the run.

Safety

The detailed git-safety rules live in the pr-fix agent (it owns commit/push). As orchestrator, hold these invariants:

• git push is the only network-mutating action - never push to main/master.
• Force-push is authorized in exactly one case: rebasing onto a landed [MegaLinter] Apply linters fixes commit, with --force-with-lease. Any other force-push needs explicit user permission - if pr-fix reports it needs one, ask the user.
• If gh is not authenticated or the repo isn't a GitHub repo, STOP and tell the user.
• Never edit generated files (DOCS.md is regenerated from JSDoc by yarn docs), never bypass Husky hooks (--no-verify), use Yarn not npm (CI and yarn.lock are the source of truth). pr-fix enforces these; if it reports a violation it could not avoid, stop and ask.