test-driven-development

name	test-driven-development
description	Use when writing any new code, adding features, or fixing bugs that require code changes. Enforces strict RED-GREEN-REFACTOR cycle with no production code without a failing test first. Triggers: new feature implementation, bug fix, refactoring existing code, adding behavior to existing modules.

Test-Driven Development

Overview

TDD enforces the RED-GREEN-REFACTOR cycle as an unbreakable discipline: write a failing test, make it pass with minimal code, then clean up. This skill prevents untested production code from ever existing and ensures every line of implementation is driven by a verified requirement.

Announce at start: "I'm using the test-driven-development skill with the RED-GREEN-REFACTOR cycle."

---

Iron Law

┌─────────────────────────────────────────────────────────────────┐
│  HARD-GATE: NO PRODUCTION CODE WITHOUT A FAILING TEST FIRST    │
│                                                                 │
│  This is non-negotiable. There are no exceptions. If you are   │
│  writing production code and there is no failing test demanding │
│  that code, you are violating this skill. STOP immediately     │
│  and write the test first.                                     │
└─────────────────────────────────────────────────────────────────┘

---

Phase 1: RED (Write a Failing Test)

Goal: Write exactly ONE test that fails for the right reason.

Actions

1. Identify the smallest unit of behavior to implement next
2. Write a test that asserts that behavior exists
3. Run the test suite — confirm the new test FAILS
4. Read the failure message — confirm it fails for the RIGHT reason (missing functionality, not syntax error or import error)
5. If it fails for the wrong reason, fix the test until it fails correctly

STOP — HARD-GATE: Do NOT proceed to GREEN until:

• Test is written and saved
• Test suite has been run
• New test fails
• Failure reason is correct (tests the intended behavior)

---

Phase 2: GREEN (Make It Pass)

Goal: Write the MINIMUM production code to make the failing test pass.

Actions

1. Write only enough code to make the failing test pass
2. Do NOT refactor. Do NOT clean up. Do NOT optimize
3. Hardcode values if that makes the test pass — that is fine
4. Run the full test suite
5. ALL tests must pass (not just the new one)

STOP — HARD-GATE: Do NOT proceed to REFACTOR until:

• Production code is written
• Full test suite has been run
• ALL tests pass (new and existing)
• No more code was written than necessary

---

Phase 3: REFACTOR (Clean Up)

Goal: Improve code quality without changing behavior.

Actions

1. Look for duplication, poor naming, long methods, code smells
2. Make ONE refactoring change at a time
3. Run the full test suite after EACH change
4. If any test fails, undo the refactoring immediately
5. Continue until the code is clean

STOP — HARD-GATE: Do NOT proceed to next RED until:

• Code is clean and readable
• All tests still pass after refactoring
• No behavior was changed during refactoring

---

HARD-GATE Enforcement

┌─────────────────────────────────────────────────────────────┐
│  HARD-GATE: PHASE COMPLETION CHECK                          │
│                                                             │
│  Before moving to next phase, ALL items in the              │
│  STOP MARKER checklist must be satisfied.                   │
│                                                             │
│  If ANY item is not satisfied:                              │
│  → STOP                                                    │
│  → Complete the missing item                               │
│  → Re-verify ALL items                                     │
│  → ONLY THEN proceed                                       │
└─────────────────────────────────────────────────────────────┘

---

Watch Mode Discipline

After every change to any file (test or production), run the relevant test suite. No exceptions.

Action	Run Tests?	Expected Result
Write a test	Yes	Failure (RED)
Write production code	Yes	Pass (GREEN)
Refactor code	Yes	Pass (still GREEN)
Any other edit	Yes	No regressions

If your test runner supports watch mode, use it. If not, run tests manually after every save.

---

Decision Table: Test Type Selection

Behavior Being Tested	Test Type	Framework Example
Pure function logic	Unit test	Vitest, pytest, cargo test
API endpoint request/response	Integration test	Supertest, httpx
Database query correctness	Integration test	Testcontainers
UI component rendering	Unit test	React Testing Library
Full user workflow	E2E test	Playwright
Error handling path	Unit test	Vitest, pytest

---

Example Cycle

Requirement: "Users can register with email and password"

Behavior List:
1. Registration with valid email and password succeeds
2. Registration fails if email is empty
3. Registration fails if password is too short
4. Registration fails if email is already taken

Cycle 1 - Behavior 1:
  RED:   test_registration_with_valid_email_and_password_succeeds → FAIL (no register function)
  GREEN: def register(email, password): return User(email=email) → PASS
  REFACTOR: rename variable for clarity → PASS

Cycle 2 - Behavior 2:
  RED:   test_registration_fails_if_email_is_empty → FAIL (no validation)
  GREEN: add if not email: raise ValueError → PASS
  REFACTOR: extract validation to separate method → PASS

...continue for each behavior...

---

Checklist: Starting a New Feature with TDD

1. Understand the requirement fully before writing any code
2. Break the requirement into a list of specific behaviors
3. Order behaviors from simplest to most complex
4. Create a task for the first behavior
5. Enter RED phase: write failing test for first behavior
6. Enter GREEN phase: write minimal code to pass
7. Enter REFACTOR phase: clean up
8. Create task for next behavior, repeat from step 5
9. After all behaviors are implemented, run full test suite
10. Invoke verification-before-completion before claiming done

---

Test Quality Standards

Each test must be:

Standard	Definition
Fast	Milliseconds, not seconds
Isolated	No shared state between tests, no test ordering dependencies
Repeatable	Same result every time, no flakiness
Self-validating	Pass or fail, no manual interpretation needed
Timely	Written before the production code (that is the whole point)

Each test should:

• Test ONE behavior or scenario
• Have a descriptive name that explains the scenario and expected outcome
• Follow Arrange-Act-Assert (or Given-When-Then) structure
• Use the minimum setup necessary
• Assert outcomes, not implementation details

---

Anti-Patterns / Common Mistakes

Anti-Pattern	Why It Is Wrong	Correct Approach
Writing production code first	Defeats the purpose of TDD; tests shaped to pass	Write the test first, always
Writing multiple tests before any code	Batch testing defeats incremental design	One test, one cycle
Test passes on first run	Either test is wrong or behavior already exists	Investigate before proceeding
Spending >5 minutes in GREEN	Writing too much code at once	Simplify; make test more specific
Modifying tests to match code	Tests specify behavior; code must match tests	Fix the code, not the test
Skipping REFACTOR phase	Technical debt accumulates rapidly	Refactor every cycle
Not running tests after every change	Regressions go unnoticed	Run tests after every save

---

Rationalization Prevention

Excuse	Reality
"It's just a small change"	Small changes cause production outages. Test it.
"I'll write the tests after"	You will not. And if you do, they will be weaker because they were shaped to pass, not to specify.
"This is just a refactor"	Refactors change behavior more often than you think. The test suite proves they do not.
"I know this works"	You do not. You think you do. The test proves it.
"Tests would slow me down"	Debugging without tests slows you down 10x more.
"This code is too simple to test"	If it is too simple to test, it is too simple to get wrong — so the test will be trivial to write. Write it.
"I can't test this because of dependencies"	Then your design has a coupling problem. Fix the design.
"The test would be harder to write than the code"	That means you do not understand the requirements well enough. The test forces you to clarify.
"I'll just manually verify it"	Manual verification is not repeatable, not documented, and not trustworthy.
"This is throwaway/prototype code"	Prototype code has a habit of becoming production code. Test it now or regret it later.
"The framework makes it hard to test"	Use the framework's testing utilities, or isolate your logic from the framework.
"I'm under time pressure"	TDD is faster over any timeline longer than 20 minutes. The pressure is exactly why you need it.

---

Red Flags

If you observe any of these, STOP and reassess:

Red Flag	What It Means	Action
Writing production code with no failing test	Immediate violation	Stop. Write the test.
Test passes immediately on first run	Test is wrong or behavior exists	Investigate before proceeding
More than 5 minutes in GREEN phase	Writing too much code	Simplify. Make test more specific.
Refactoring changes behavior	Test coverage has a gap	Add missing tests
Tests modified to pass	Requirements inverted	Fix code to match tests
Multiple tests before any production code	Batch testing defeats purpose	One test at a time
Test suite not run after a change	Regressions invisible	Run tests. Always. Every time.

---

Integration Points

Skill	Relationship
verification-before-completion	MUST be invoked before claiming any TDD work is complete
systematic-debugging	When a test fails unexpectedly during REFACTOR, switch to debugging
code-review	After completing a feature via TDD, review the test suite for completeness
acceptance-testing	Acceptance criteria drive the behavior list for TDD cycles
planning	Plan breaks features into behaviors suitable for TDD cycles
testing-strategy	Strategy defines frameworks; TDD defines the cycle

---

Test Types in TDD

Type	Scope	Speed	When to Write
Unit (Primary)	Individual functions, methods, classes	Milliseconds	RED phase for every behavior
Integration (Secondary)	Component interactions	Seconds	After unit tests cover individual behaviors
E2E (Tertiary)	Complete user workflows	Seconds-minutes	Critical paths after unit and integration are solid

---

Skill Type

RIGID — The RED-GREEN-REFACTOR cycle is mandatory and cannot be reordered, skipped, or combined. Every phase has a HARD-GATE that must be satisfied before proceeding. No production code without a failing test first.