mulmoterminal-dirs

name

mulmoterminal-dirs

description

Colour-code and order the directories you actually work in, from wherever you are. Writes each project's `<project>/.mulmoterminal.json` — name badge, project icon image, the seven chrome colours, xterm palette (`theme` / `colors`), terminal font size, `orderPriority` (where it sits in the grid and in the launcher's chips), and `worktreeEnv` (a value of its own per git worktree for each declared variable — a dev-server port, a database name — so two `yarn dev` do not fight over 3000). Starts from your recent MulmoTerminal directories rather than just the current one, reads the configs you already have, works out the convention you have been following, and continues it for the ones that are unset or off-pattern — so a newly cloned repo gets the colour and rank it should have had. Also owns what the header shows once a STATUS takes the background over — `headerStatusColors` (a colour per working / done / blocked) and `headerStatusTint` — in a project's file and as the global default in `~/.mulmoterminal/config.json`. Use when the user wants to colour-code, theme, rename, reorder, or resize projects in MulmoTerminal — "give this project a colour", "colour-code my repos", "keep my main repos at the top", "the new clone has no colour", "make them consistent", "terminal text is too small", "two worktrees fight over port 3000", "give each worktree its own port / database" — or when the header is hard to read or changes colour while a session is running — "I can't read the header while it's working", "the colour changes when it runs", "keep my header colour while running". For inventing a NEW reusable colour scheme that shows up in Settings, use mulmoterminal-theme instead.

Colour and order the directories you work in

MulmoTerminal reads <project>/.mulmoterminal.json to style every terminal opened in that directory. There is no UI that writes this file — this skill is the way it gets written.

Two files ship next to this one:

• palettes.json — colour presets grouped by vibe, for a user with nothing configured yet.
• dir-config.schema.json — the generated JSON Schema. "Schema" below matches it.

The shape of this conversation

The unit of work is the set of directories the user actually opens, not the current one. Someone who colour-codes projects is doing it so the grid is readable at a glance, and that only works if the colours are decided against each other.

So: gather → infer → propose the whole set → apply → look → adjust.

Ask with AskUserQuestion, one decision at a time, always with concrete options. A beginner should never have to invent a hex code.

1. Gather — the directories, and what they already say

Read ~/.mulmoterminal/config.json and take cwdPresets ([{ label, path }], most-recent first — the same list the New-terminal launcher offers). That is the population. Worktrees are not recorded into it, so it is the user's real projects rather than every task branch they have ever opened; an older entry that still names one is theirs to keep or remove, not this skill's to prune.

Then, for each of those paths:

curl -sG "http://localhost:${MULMOTERMINAL_PORT:-34567}/api/dir-config-detail" --data-urlencode "cwd=$path"

Let curl encode cwd (-G + --data-urlencode) rather than interpolating the path into the query: a raw path truncates at the first # or ? and mangles spaces.

Use this route, not your own read of the file. It returns what the app actually parsed: the values in force, the keys the file set, and how each fared — applied, dropped in validation, or not a key we read. A hand-read tells you what the file says; only this tells you what is in effect, and the difference is the entire content of "I set it and nothing happened". It also resolves the path the way the app does (a preset whose project has since been deleted answers as missing rather than silently reporting on some other directory).

If the server is not running, fall back to reading each .mulmoterminal.json directly and say that you could not check what was dropped.

If there are no cwdPresets yet, this is a fresh install: configure the current directory from a preset in palettes.json and stop.

2. Infer — work out the convention already in use

Do not skip to a preset when the user already has configs. They have a scheme; your job is to find it and extend it, not to replace it. Convert every configured colour to HSL and look for:

• One hue per directory? In a hand-made scheme, a directory's seven colours are usually one hue at different saturations and lightnesses. Check whether the hues within a directory agree.
• Fixed saturation/lightness per role. badgeColor dark and saturated, headerColor a little lighter, cellColor near-white, cellBorderColor and dotColor mid, buttonColor pale — the numbers repeat across directories even when the hue does not. Take the median of each role.
• Hue bands by repository family. foo, foo2, foo3 are clones of one repo and usually sit in one band, stepping by a constant number of degrees per clone, often getting lighter as the number goes up. That step is what tells you what foo6 should be.
• orderPriority spacing and blocks. Ranks are typically multiples of 10, grouped so one repo's clones are contiguous. You need the step and the free numbers.

Show the user the rule you found before you use it, as a small table — hue per family, the S/L per role, the rank blocks. This is the step where a wrong inference gets caught, and it costs one message. If the configs are too few or too inconsistent to support a rule, say so and fall back to palettes.json; do not invent a pattern from two data points.

3. Classify — who needs what

Sort the population into three, and name them to the user:

• On-pattern — leave alone. Never rewrite a directory that already fits.
• Unset — no colours at all. These are the point of the exercise: a repo cloned last week that shows up grey.
• Off-pattern — configured, but not by the rule (a different saturation, a hue outside every band). Ask before touching these. They may be deliberate, and rewriting someone's one intentionally-odd project is worse than leaving it.

4. Propose the whole set at once

Give each target its values, derived from the rule:

• Hue — the next step in its family's band, or a free band if the repo is new. Keep it clear of every hue already in use; adjacent projects in the grid must not read as the same colour.
• The seven colours — that hue at the role S/L you measured.
• orderPriority — the next free rank in its family's block. If the block is full, say so and offer either a gap-filling rank or a renumber of that block.

headerTextColor is not part of the hue rule — it is whichever of white or near-black is readable on headerColor. Decide it by WCAG relative luminance, not by a brightness approximation: gamma-decode each channel (c/255, then c<=0.03928 ? c/12.92 : ((c+0.055)/1.055)^2.4), weight 0.2126 R + 0.7152 G + 0.0722 B, and take whichever of black/white gives the higher contrast ratio (lighter+0.05)/(darker+0.05). The YIQ shortcut (0.299/0.587/0.114 on raw channels) picks the worse of the two for about 30% of colours — a vivid green header gets white text at 1.37:1, which is unreadable. The app itself uses the WCAG rule (src/components/contrast.ts); match it.

5. Apply, then look at the real thing

Write each file, then let the user look. The cells recolour immediately — no page reload, no server restart. Writing the file with your Write/Edit tool is itself the reload signal; there is no filesystem watcher, so a file the user edits by hand does nothing until something re-reads it.

Do not try to preview colours with ANSI escapes. Claude Code does not render colour in tool output, and a Bash child here has no controlling terminal (/dev/tty → device not configured). Verified — don't spend a turn on it. Name the hex and say how it feels ("terracotta on near-black — cosy, low glare"), then apply and let them look at the grid, which is the only exact preview.

Read the existing file and merge before writing. Never drop a key the user did not ask to change.

6. Refine, one axis at a time

Never "what colour do you want?". Offer: background darker / as-is / lighter · accent warmer / cooler · header contrast subtle / strong. Apply and look after each. Two or three rounds is plenty.

The chrome colours only show while the cell is idle — the working/attention colours take over while a session is busy or waiting on the user. Say this, or the user will change a colour, start a session, and think nothing happened.

An open file the whole ecosystem reads — repo.json

<project>/repo.json is an open repository-metadata format (docs/repo-json.md), not this app's own file. MulmoTerminal reads it as the LOWEST layer, under both files below.

{ "name": "diffusion-lab", "icon": "docs/logo.png", "color": "#7c3aed" }

color — one colour — becomes all seven chrome colours. icon becomes the cell icon. Anything this app understands that the open format doesn't goes under extensions.mulmoterminal.

Prefer it when the colour is the PROJECT's, not the user's. A project with a real brand colour should say so in repo.json, where every tool can read it and where the repository can commit it for everyone. Reach for .mulmoterminal.json when the colour is a personal choice about how this user's grid should look — which is most of what this skill does.

When you find a repo.json already in place, read it before proposing colours: the project has stated its own, and overriding it in .mulmoterminal.json needs a reason you can give the user.

Several clones of one repository — .mulmoterminal.local.json

<project>/.mulmoterminal.local.json is read AFTER .mulmoterminal.json and replaces whatever top-level keys it names. The full order, general to specific, is repo.json → .mulmoterminal.json → .mulmoterminal.local.json. Keys it does not name keep the shared value; a colors block replaces the shared one entirely rather than merging into it.

This is the right shape whenever the population you surveyed contains several checkouts of one repository (foo, foo2, foo3 …) — which step 2 already looks for as a hue band:

• .mulmoterminal.json gets the FULL config, colours included. Somebody who clones the project once must end up with a working colour from this file alone, so do not reduce it to the shared half and leave the colours only in local files.
• .mulmoterminal.local.json gets only what makes THIS checkout recognisable — the seven chrome colours and orderPriority. It is per-machine, so tell the user to gitignore it.

When you write both, keep the shared file's colour as the family's first hue and let each clone's local file step from there, so the repository's own file is not the odd one out.

The settings preview (/api/dir-config-detail, step 1) names both paths and returns source.local — the keys the local file took over. Read it before concluding a directory is off-pattern: a colour that disagrees with .mulmoterminal.json is usually the local file winning, not a config that needs fixing.

Schema — <project>/.mulmoterminal.json

All keys optional. Colours are lowercase #rrggbb unless noted. MulmoTerminal silently drops anything malformed, so an invalid field just doesn't take effect — which is why step 1 checks what was dropped rather than trusting the file.

Identity and chrome colours

Key	Meaning
name	Badge label (≤ 40 chars).
icon	An image marking this directory (see below).
badgeColor	Name-badge colour.
headerColor / headerTextColor	The cell header's background / text while the cell is idle.
headerStatusColors / headerStatusTint	What the header shows once a status takes over (see below).
cellColor	Cell body background.
cellBorderColor	Cell border.
dotColor	Idle status dot.
buttonColor	Header icon buttons.

The header while a session is running — headerStatusColors / headerStatusTint

headerColor is the idle colour. Once a session is working, done, or blocked, the theme replaces the header background with its own wash — selection blue, a green mix, the warning amber — so that the grid says whose turn it is from across the room.

That is why headerTextColor applies only while the directory's own background shows. An ink chosen for a dark purple is not readable on a pale wash, which is the whole of #1591: white on #d6e4fb, 1.15:1. Do not try to fix that by picking a compromise ink — set the status colour.

{
  "headerColor": "#8e44ad",
  "headerTextColor": "#ffffff",

  "headerStatusColors": {
    "working": "#6d28d9",                                  // shorthand: just the background
    "done": { "background": "#166534" },
    "blocked": { "background": "#7c2d12", "text": "#ffe8a3" }
  }
}

• Only working, done and blocked. There is no idle here — headerColor is idle.
• Omit text and it is derived from background by the same WCAG rule as headerTextColor above. Prefer omitting it: a background alone can never come out unreadable.
• A status you do not name keeps the theme's wash.
• Naming text without a background is allowed and left exactly as written — that is a statement about a wash you can see, so it is on you to check it.

headerStatusTint: "none" keeps headerColor in working and done instead of the wash. The status still reads from the cell border, the status dot and the pill.

{ "headerColor": "#8e44ad", "headerStatusTint": "none" }

"none" does not reach blocked. That is the state where nothing proceeds until the user answers, and a switch about palette consistency must not take its amber away. A directory that genuinely wants another colour there writes headerStatusColors.blocked, which is honoured.

Both keys also work in the global config (~/.mulmoterminal/config.json), where they are the DEFAULT for every directory — which is usually where they belong, since the readable pairing of a wash and its ink is a property of the theme, not of one project. A .mulmoterminal.json that names either key outranks the global value for that directory, whole-key: a directory's headerStatusColors replaces the global block rather than merging into it.

Project icon — icon

An IMAGE beside the name badge, in the cell header, the cockpit roster, the filmstrip thumbnails, the launcher's directory chips, and the phone's terminal list and terminal screen. Not a Material Symbols name — that is what a header BUTTON's icon is, and it is mulmoterminal-header's key, not this one.

• A path is relative to this directory, and confined to it: an absolute path, or a ../ that escapes, is dropped. Or an http(s):// URL, or a data:image/… URI (capped at 64 KB, since it rides in every cell's config fetch — point at a file for anything larger).
• PNG, JPEG, GIF (animated ones play), WebP, AVIF, SVG, ICO, BMP. Any other extension is dropped.

Do not invent one. Look for an image the repository already has — public/favicon.svg, public/apple-touch-icon.png, a web manifest — and offer what you found. A project with no logo of its own is better served by the colour scheme; an icon that is not the project's own picture is one more thing to recognise, which is the opposite of the point.

Prefer a file over a URL: a remote image is a request per cell to somebody else's host, and it disappears when that host does. Prefer a committed file over a gitignored one — worktrees inherit the key as written, so only a committed image is found in the worktree too.

Usually you do not need to write this key at all. MulmoTerminal already picks up a project's own favicon when the key is absent — see below — so writing "icon": "public/favicon.ico" sets by hand what was going to happen anyway. Write it when the repository's icon is somewhere the search does not look, or when the project should show a different picture from its favicon.

The favicon is picked up on its own — autoDirIcon

A directory that sets no icon shows the icon its repository already ships. Searched in this order, first hit wins:

1. public/favicon.svg, then favicon.svg
2. public/apple-touch-icon.png, then apple-touch-icon.png
3. public/favicon.png, then favicon.png
4. public/favicon.ico, then favicon.ico
5. a web manifest (public/site.webmanifest, public/manifest.json, or either at the root) — its largest non-maskable icon

Ordered by how the image survives being drawn at 14px, not by how common it is. docs/logo.png and assets/logo.* are deliberately NOT searched: a "logo" is as often a wide README banner as an icon, and one of those squeezed into 14 square pixels reads as a smudge.

Two ways to turn it off, and they mean different things:

• "icon": false in a project's own file — "no icon on THIS project's cells". Worktrees inherit it.
• autoDirIcon: false in ~/.mulmoterminal/config.json (or the checkbox in Settings → Directory appearance) — off everywhere. This is the one to reach for if the behaviour itself is unwanted; "icon": false in every repository is not.

A key that was written and got it wrong does NOT fall back to the favicon. "icon": "logo.png" pointing at a file that isn't there leaves the cell with no icon at all, on purpose: a broken setting has to look broken. If a project shows nothing where you expected a picture, check /api/dir-config-detail (step 1) — the key will be in the ignored list.

Terminal palette — theme and colors

The seven above tint the chrome around the terminal. These paint the terminal contents.

• theme — a palette id: one of the built-in "midnight" / "nord" / "daylight" / "solarized" (the id is solarized; "Solarized Light" is only its display label), or the id of a scheme the user defined in themes in ~/.mulmoterminal/config.json. A directory naming a theme that isn't defined falls back rather than erroring, so check it exists. To create one, use the mulmoterminal-theme skill.
• colors — per-key overrides on top of theme. Keys are xterm ITheme names; values accept #rgb / #rgba / #rrggbb / #rrggbbaa. Valid keys: foreground, background, cursor, cursorAccent, selectionBackground, selectionForeground, selectionInactiveBackground, and the ANSI 16: black red green yellow blue magenta cyan white brightBlack brightRed brightGreen brightYellow brightBlue brightMagenta brightCyan brightWhite. Unknown keys are dropped.

Grid and launcher position — orderPriority

An integer rank. Lowest first; negatives allowed. Directories that set nothing sort last, keeping their existing order, so ranking one project doesn't shuffle the rest. The rank belongs to the directory, not the cell, so two cells on one directory share it.

It is read in two places:

• The grid, only in its priority sort mode (the toolbar's ordering button cycles auto → manual → priority). On auto or manual, nothing changes, whatever the projects declare — say this, or the user sets it and wonders why the grid looks the same.
• The launcher's directory chips, always, whichever mode the grid is on. The chips otherwise come in the order the directories were last launched, which moves under the user; ranking is how they get pinned. Unranked directories stay behind the ranked ones, in launch order.

Assign spaced ranks (10, 20, 30 …) so a project can be slotted in later without renumbering.

Terminal font size — fontSize

Integer px, 8–32, overriding the user's Settings value for this directory. Out of range is clamped to the nearest end rather than dropped; a non-number is ignored. Omit unless asked — inheriting the Settings value is the normal case.

Reach for it when the user says the terminal text is too small or too big, especially if they mention browser zoom: zoom desynchronises xterm's cell grid from the PTY (drifting cursor, wrong wrap points), while fontSize re-fits and tells the process its new size.

Terminal font — fontFamily

A CSS font-family stack for this directory, e.g. "'Cica', 'MS Gothic', monospace". Validated as ONE unit: any unusable entry drops the whole stack, and monospace is appended when no generic family is named.

Most users want this globally instead — it is the same font everywhere unless one project's output is a different language. Both the global key and the per-directory one are covered here; the global one lives in ~/.mulmoterminal/config.json. Settings → Terminal font sets it and it applies at once — point at that when the user just wants a different font. A HAND edit of that file while the server runs still needs a restart (it is read once at startup), unlike this file, which applies instantly.

Ask which fonts they actually have before writing one. An uninstalled name silently does nothing, which reads as the setting being broken. For CJK, prefer a face whose fullwidth glyphs are exactly twice the Latin width (Cica, HackGen, Sarasa Mono J, Noto Sans Mono CJK JP, MS Gothic, BIZ UDGothic); anything else tears the box-drawing frames an agent TUI is made of.

A port and a database name per worktree — worktreeEnv

A worktree isolates files, not ports. Two worktrees running yarn dev both reach for 3000 and the second one dies; several pointed at one local database means the tree that runs a migration breaks the rest. worktreeEnv declares what each working tree needs its OWN of, and MulmoTerminal reserves a distinct value per tree and exports it into that tree's terminals.

{
  "worktreeEnv": {
    "PORT": { "kind": "port", "base": 3000 },
    "DB_NAME": { "kind": "slug", "prefix": "myapp_" }
  }
}

Field	Meaning
key	The variable name — whatever the project reads (PORT, VITE_PORT, NEXT_PUBLIC_PORT). Up to 16.
kind: "port"	A free TCP port: base + a multiple of 10. base is 1024–65215.
kind: "slug"	A [a-z0-9_] name from the tree's task (or folder) name, behind an optional prefix. Cut to 63 chars.

The project's own checkout keeps base itself; its worktrees take base+10, base+20, … So a project declaring 3000 sees 3000 where it always did.

Four things to say when you write this:

• Ask which variable the project actually reads. PORT is a guess. Look for it in package.json scripts, vite.config.*, .env.example, docker-compose.yml — a declaration under the wrong name is a setting that silently does nothing.
• MulmoTerminal does not create the database. It hands out a name nothing else holds; using it is the project's migrate script's job. Offer to wire that up only if asked.
• Values are reserved once and kept (~/.mulmoterminal/worktree-env.jsonl), so a running dev server's port never moves under it. Editing base later re-allocates every tree.
• It IS carried into new worktrees, unlike sound / addDirs — it is a declaration, not a value, so each tree resolves its own from it.

Each cell shows what it got on the header's env chip (:3010, clickable). The chip is on by default and renders nothing where no worktreeEnv is declared, so there is nothing to switch on.

Worktrees derive their own config from this one

A managed git worktree (~/.mulmoterminal/worktrees/<repo>-<hash>/<task>) gets its own .mulmoterminal.local.json when MulmoTerminal creates it, derived from the project's: identity keys (name / icon / theme / colors / fontSize / fontFamily / provider / model / worktreeEnv) as written, the seven chrome colours rotated 12° further per worktree, and orderPriority at the project's rank + 1. sound / sounds / addDirs are not carried.

Two consequences for this skill:

• Leave worktree directories out of the population you survey. Their colours are derived, not chosen, so reading them as data would infer a 12° family step that nobody decided on. Rank them and they collide with the +1 the app writes.
• Recolouring a project does not recolour its existing worktrees — the copy was taken when the worktree was created. Say so if the user asks why one cell kept the old colour, and offer to delete that worktree's .mulmoterminal.local.json so the next launch has nothing stale.
• A worktree gets nothing when its repository gitignores NEITHER config file. That is the check MulmoTerminal makes before writing, since an untracked file would make the worktree count as dirty and therefore unremovable. If a user's worktrees are all grey, a missing .gitignore line is the first thing to look at — .mulmoterminal.local.json is the one to add.

Other keys in this file

buttons / chips → mulmoterminal-header. provider / model → mulmoterminal-model. sound / sounds → mulmoterminal-notify. skills (the header Skill menu's allowlist and order) and appendSystemPrompt (this directory's closing-summary override) → mulmoterminal-config. Preserve them when you merge — this skill writes appearance keys and must not drop the rest.

Example — continuing a convention

Four clones of one repo, stepping ~13° per clone and getting lighter, ranks in one block of 10s. The fifth is unset; these are the values that continue the rule:

{
  "name": "acme-web5",
  "badgeColor": "#1f6f8b",
  "headerColor": "#2b93b8",
  "headerTextColor": "#231f16",
  "cellColor": "#f2fafd",
  "cellBorderColor": "#4fb4d4",
  "dotColor": "#4fb4d4",
  "buttonColor": "#cfeaf4",
  "orderPriority": 60
}