usbguard-setup

name	usbguard_setup
description	Maintains the ansible/roles/usbguard_setup Ansible role that installs USBGuard and enables/starts its service by default with a reject-all policy on RHEL-family systems as part of the Linux SOE. Use when checking or configuring USB device allow/block policy via usbguard. There is NO opt-in gate on service enablement — enforcement is on by default with policy=reject.

usbguard_setup

Maintains ansible/roles/usbguard_setup/. See docs/ARCHITECTURE.md for the shared conventions — this is the role with the highest blast radius in the SOE. Read this whole file before running remediate on any host with only physical console access.

ansible/roles/usbguard_setup/README.md documents this role's full configuration surface (every defaults/main.yml variable, with its original inline comments, rendered as a single reference). Read it before proposing or explaining how to configure this role — it reflects the role's actual current defaults even if a variable summary elsewhere in this file has drifted out of sync with the role.

What the role actually does — service enablement is NOT opt-in

Encoded in ansible/roles/usbguard_setup/defaults/main.yml:

• usbguard_setup_policy (default reject): reject (default-deny, all connected devices blocked), custom (use usbguard_setup_config_file/_rules_file/_ipc_access_file), or allow (disable USBGuard and allow all USB devices).
• There is no soe_usbguard_manage_service-style opt-in variable in this role. Whenever usbguard_setup_policy != 'allow' (i.e. the default reject, or custom), the role installs USBGuard, writes the policy config, enables and starts usbguard.service unconditionally. With the default policy: reject and default rules.conf handling below, running this role's remediate path on an unconfigured host applies a default-block USB policy and turns on enforcement in the same run.
• If usbguard_setup_rules_file is unset (the default), the role writes an empty /etc/usbguard/rules.conf — it does not run usbguard generate-policy to seed an allow-list from currently-attached devices. Combined with default policy: reject and unconditional service enablement, the out-of-the-box remediate behavior is: empty allow-list + reject-all + service started — which can block all USB devices including a keyboard/mouse on a host with only physical console access.
• usbguard_setup_exclusive: true removes unrecognized rules/IPC files not in usbguard_setup_files_known via include_role: files_remove — that role is not vendored in this repository; it must be resolvable separately for _exclusive: true to work.
• policy: allow takes the opposite path entirely (disable.yml): disables and stops usbguard.service if the package is present, does not touch config files.

What to do

This role is off by default in ansible/configure_rhel.yml — every role there (active or not) is gated by a single configure_rhel_domains list variable (when: "'<name>' in configure_rhel_domains"), and usbguard_setup isn't in the default value of that list. Nothing needs editing in the playbook itself to turn it on: pass the full desired domain list via -e, e.g. -e '{"configure_rhel_domains": [...the default 20..., "usbguard_setup"]}' (see .claude/skills/configure_rhel/SKILL.md for the current default list to extend, and why it has to be the full list, not just the addition — -e replaces the variable's value, it doesn't merge into it). --tags usbguard_setup alone is not enough — the domains list and --tags/--skip-tags are separate, ANDed gates, both verified independently: a role only runs if it's in configure_rhel_domains and matches the requested tags. Some roles (this one — check its defaults/main.yml and task file) also have their own internal enable flag or required variable on top of that, which still needs setting the same as before. Flag all of this to the user before assuming the commands below will do anything.

Audit: ansible-playbook ansible/configure_rhel.yml --tags usbguard_setup --check --diff

Before any remediate run on a host that is not policy: allow: confirm with the user (a) they have a non-USB or already-reviewed access path (remote console, iDRAC/iLO, an already-allow-listed keyboard/mouse), and (b) whether usbguard_setup_rules_file should point at a real, reviewed rules template — since the default is an empty rules file and this role enables enforcement in the same run, not a separate step:

ansible-playbook ansible/configure_rhel.yml --tags usbguard_setup

To explicitly disable enforcement instead (allow all USB devices, service off): set usbguard_setup_policy: allow.

Propose a change to the role itself — especially anything touching default service enablement or the empty-rules-file default: never commit directly, and flag it explicitly in the PR body given this role's blast radius. On a branch named soe/usbguard_setup/<short-desc>, edit the role, validate locally (--syntax-check, ansible-lint roles/usbguard_setup/, --check --diff), push, and open a PR titled [usbguard_setup] <what changed> — then stop for human review. See docs/ARCHITECTURE.md's "Contribution workflow".

Notes — read before touching this role

• Do not describe this role's service enablement as opt-in or safety-gated — it is not, as currently implemented. If the user expects an opt-in gate (e.g. from prior documentation or another SOE role's pattern), flag that mismatch explicitly rather than assuming the gate exists.
• Always get explicit confirmation of another access path before a remediate run with policy: reject/custom on a host with only physical console access — the empty default rules.conf plus unconditional service start is the exact combination that can lock out a physically-connected keyboard/mouse.
• usbguard_setup_exclusive: true depends on an external files_remove role this repo does not vendor — confirm it's resolvable before relying on it.