Spawn subagents and dynamic workflows well — size each task to the context window (~33% of 1M target), pick the right model tier, and rule on agents that run past it. Use whenever delegating work to subagents, launching a Workflow, deciding how to split a task across agents, or handling a watchdog alert about a full context.
Spawn subagents and dynamic workflows well — size each task to the context window (~33% of 1M target), pick the right model tier, and rule on agents that run past it. Use whenever delegating work to subagents, launching a Workflow, deciding how to split a task across agents, or handling a watchdog alert about a full context.
Subagents and Dynamic Workflows
The orchestrator delegates execution and keeps its own context lean. The two decisions that make delegation work are how big to make each subagent's task and which model runs it. Getting the size right matters more than anything else: it is the difference between coherent, trustworthy work and hallucinated, low-quality work.
Keep this skill true rather than long: when a real run's measured cost contradicts a band below, correct that band.
The context budget: aim for ~33% of the 1M window
Fable, Opus, and Sonnet all have 1,000,000-token context windows. So ~33% ≈ 330k tokens.
These models begin degrading around 25–33% window fill. Past ~33%, distrust the output — that is where hallucinations, silently-dropped requirements, and quality regressions appear. Do not trust results from a context much fuller than a third.
Design each task to LAND near 33% by the time it finishes — not to blow past it. The target is the end state of a healthy task, not a ceiling you race toward.
Soft rule, not hard: if an agent is genuinely near the end of its task when it crosses 33%, let it finish — interrupting or compacting mid-task is worse than mild degradation at the finish line. What you must avoid is an agent still doing substantive work at 50%+.
Sizing: the tradeoff to balance
Too small → over-parallelization. Many agents each holding a partial view produce fragmented, less coherent work with integration seams, duplicated context loading, and coordination overhead.
Too big → the context overflows past ~33%, performance degrades, and either the quality drops (hallucinations, missed requirements) or the agent dies mid-task with its work wasted.
Right-sized = one coherent deliverable an agent can hold entirely in a healthy (<~33%) context, including all the reading and gate-iteration the task requires.
Estimate a task's token cost BEFORE you spawn
Add up the big consumers:
Startup: the agent's system prompt + your task prompt + any skills it loads. A rich task prompt plus 3–4 skills is easily 20–60k tokens before it does any work.
Reading: each file ≈ characters/4 tokens. Design docs, research digests, and broad source-tree reading add up fast — a large design doc plus a digest can be 30–60k on its own.
Iteration (usually the silent killer): every tool result accumulates and is replayed into context on later turns. Gate runs (lint/tsc/test/build), git diff, and test/build logs each land in full. A build-until-green loop can add 100k+.
Output: cumulative generated tokens (code + reasoning) count too, though the input side normally dominates.
If the honest sum lands well past ~330k, the task is too big — split it or scope it down before spawning.
Calibration bands
End-of-task context measured on real runs in this workspace, builders at Opus/xhigh. Size against the band, not against a new data point that agrees with it:
A feature lane does not fit one agent. Built from scratch (migration + business + routes + tests + gate-until-green) it reaches 330–337k while still mid-build. Split it: a data + business + tests slice lands ~330k, right at the line, and carrying routes/UI on top pushes it to ~383k — routes and UI are always their own slice.
Resuming is far cheaper than restarting. An agent pointed at on-disk state plus the design doc finishes a lane's remainder at ~232–244k, because it never re-derives the design. So prefer design (1 agent) → coherent sub-slices in parallel → review fan-out over one agent per lane.
A settled pattern makes unit count nearly free. 81 near-identical registrations plus tests and scoped gates finished at ~238k — high unit count is fine in one agent when the pattern is chartered and each unit is small.
Test lanes cap by item count. E2E spec lanes of 3–10 specs land 165k–300k; 14–16 specs land 342k–377k, past the line every time — keep spec lanes at ~10 specs. A lane that also builds or extends a fake-provider surface runs bigger still (320k for fakes + 11 specs, 472k when extending the fakes and a settings overlay) — split fake construction from spec writing whenever the fake is more than an endpoint or two. A unit-coverage lane over one or two Django apps lands 210k–370k — split app pairs whose combined surface is large.
Fix passes cap near ~10 items. A 14-item cross-cutting pass (schema moves, queryset extractions, new tests, TDD per behavioral item, 72 files) finished at ~346k, with every claim needing independent re-verification; split mechanical moves from behavioral fixes when a pass mixes both. A 15-item test-harness fix pass lands ~172k; 2–4 item surgical or audit-remediation passes ~110–120k.
Single-purpose passes have room to bundle more. Design-doc drafting ~190–200k; a browser E2E QA pass (dev server + agent-browser flows + screenshots) ~116k; a real-client OAuth E2E (CLI client + PTY + browser + DB checks) ~129k; a coverage-gate/harness-infrastructure build ~183k; a two-reader route-surface census ~291k total; a docs-authoring lane (four worked recipes plus a design-doc staleness sweep, every claim verified against the live API) ~260k.
Review fan-out. Finder agents run ~68–115k each and per-candidate verifiers ~28–68k each. Budget ~890k for a 13-agent pass over a ~1.6k-line diff, and roughly 1.5M for a goal-scale pass (8 finders + 21 verifiers).
Measure a live or finished agent's context
Transcripts record per-turn token usage. Extract just the numbers — never read the JSONL wholesale (it overflows your own window). The last turn's input_tokens + cache_creation_input_tokens + cache_read_input_tokens is that agent's current context occupancy:
python3 - <<'PY'
import json, os
WINDOW = 1_000_000
FILES = {"<agent-id>": "<label>"} # fill in ids → labelsfor aid, label in FILES.items():
f = f"/path/to/tasks/{aid}.output"if not os.path.exists(f): print(f"{label}: no transcript"); continue
last = peak = out = turns = 0
for line in open(f):
try: o = json.loads(line)
except: continue
m = o.get("message"); u = m.get("usage") if isinstance(m, dict) else None
u = u or (o.get("usage") if isinstance(o.get("usage"), dict) else None)
if not u: continue
ctx = u.get("input_tokens",0)+u.get("cache_creation_input_tokens",0)+u.get("cache_read_input_tokens",0)
if ctx: last, peak, turns = ctx, max(peak,ctx), turns+1
out += u.get("output_tokens",0)
print(f"{label}: turns={turns} last={last:,} ({100*last/WINDOW:.0f}%) peak={peak:,} out={out:,}")
PY
Use it to watch a long-running agent's trajectory, and to read a finished agent's final occupancy into the calibration bands above.
Never let a workflow run long unmonitored — completion notifications are not monitoring, and a builder can quietly blow past the line an hour before you would otherwise look. Pair every workflow expected to run more than ~30 minutes with the background watchdog, which runs the same extraction across a whole run:
It sweeps every agent transcript in those directories every 20 minutes and exits loudly the moment an agent's last-turn context passes 280k while its transcript is still fresh — run it as a background shell so the exit fires a task notification. Launch it as the background command itself, never wrapped in a shell line that re-backgrounds it with an inner "&": the wrapper exits immediately, the harness stops tracking the detached watchdog, and its alert can never notify. When a workflow ends, its watchdog dies by your hand — list the process, kill the exact pid; stale watchdogs quietly sweeping finished runs have accumulated three deep. The Workflow tool result prints the run's transcript dir; that directory is a required argument, and a launch that names none refuses to start rather than quietly sweeping nothing. The known trap is a launch that points the watchdog at nothing real — no directory, or a path that does not exist: it would start happily, sweep nothing, and read as "all clear" for hours, so the script refuses instead. WATCHDOG_IGNORE takes a comma-separated list of transcript filenames, to silence agents already ruled on. Relaunch the watchdog after each check-in, and stop it when the workflow ends.
Stopping an over-threshold agent
Start every alert-handling with a fresh read of that run's journal.jsonl. The watchdog names only transcripts over the threshold, so an agent that finished under it is invisible to the alert, and an alert on a transcript idle for more than a few minutes is usually a ghost — an agent that has already reported. A new transcript is not necessarily a new stage.
Then rule on what is ahead of the agent, not on the number:
A mechanical tail ahead — gates to green, a commit, a push, a checkpoint, the report — means let it finish, even far past the threshold. An agent literally writing its handoff is never worth stopping.
Design or judgment ahead — a centerpiece still to be built, a failing-test debug loop, an unresolved decision — means stop and continue with a fresh agent, even below the threshold. Degraded judgment is the expensive failure; a continuation's re-read is cheap.
Rework discovered mid-stage voids a prior let-finish — it is new work, not the tail. A stage ruled let-finish because only its mechanical remainder was ahead can find a real defect in that remainder and absorb the whole fix-and-reverify cycle with judgment work back in front of it; a fresh continuation finishes the same remainder at a fraction of the context. A stage that discovers rework beyond its charter checkpoints its state and stops, and a watchdog re-armed after a let-finish ruling is armed for exactly this.
Two axes rule alongside:
Tree state. Clean and pushed extends the license: the work is safe and a continuation starts from it. A dirty tree past ~450k revokes it — the exposure is uncommitted work dying with the context.
Wave cost. Stopping a task in a parallel() wave that has produced no cached results yet kills every sibling in it. The cost of stopping one over-threshold agent is the whole wave, which routinely rules in favor of letting it finish.
Shrink a task's footprint
Point the agent at specific docs and sections, not "read everything."
Have agents return distilled conclusions, not raw file contents — the summary is the deliverable, not the transcript.
Split along natural seams (by module, by layer, by review dimension) — but not so finely that coherence breaks. Cohesive or dependent work stays in one agent.
When splitting data-building work into parallel lanes, check foreign-key direction first: a lane whose models hold non-null FKs to another lane's rows cannot pass its own gates until that lane merges, so it is sequential no matter how disjoint the files look. A planned parallel split failed at charter time when every model in the "independent" lane required the sibling lane's rows.
Use pipeline()/parallel() for genuinely independent units; keep dependent work sequential in one agent.
Resume interrupted work with a fresh agent + a summary and the on-disk state, not by replaying a giant transcript.
Keep the orchestrator's own context lean: delegate, store durable state in the scratchpad ledger, and don't read what a subagent can read for you.
Dynamic workflows
Inline task data into the script body — never pass it through args. A Workflow launched with an args object can silently arrive as undefined inside the script, failing instantly with a missing-args error. Write charters, file lists, and other per-task data as template-literal constants in the script itself.
Launch independently-completing units as separate Workflow invocations, not one parallel() barrier. A barrier notifies only when every agent in it finishes, so a downstream slice that depends on just the fastest lane still waits for the slowest. When lanes finish at different times and feed different dependents, give each its own invocation.
Consume a finished workflow's own returned result object; never re-pair its findings with verdicts by journal-line order. Agents complete in a different order than they were submitted, so zipping a journal's lines against a separate verdict list misaligns them — a REFUTED finding reads as confirmed. Read the {confirmed, refuted} (or equivalent) object the workflow returns, where each finding already carries its own verdict.
In review workflows, dedupe findings BEFORE spawning verifiers, never after. Parallel finders raise the same defect from different dimensions; verifying each copy independently doubles verifier cost and can return divergent verdicts on the same claim (one CONFIRMED by an empirical probe, one REFUTED by static reading — the probe wins, but only if you notice the collision). Key findings by file/line/claim and verify each defect once.
Never pass isolation: 'worktree' to agent() in this workspace. The harness would create a worktree of the workspace root repo (the Claude Code settings repo), not of the nested product repo the task actually changes. Charter the agent to create its own isolation instead: a plain git worktree add inside the target repo, removed after pushing — the worktrees skill covers the lifecycle.
A workflow agent's spawn cwd is the orchestrator's session cwd at launch — a drifted artifact, not a signal. The session cwd moves with every Bash cd, so parallel lane agents can all spawn inside one sibling's worktree. Never let an agent infer its lane from where it woke up: the charter names the worktree by absolute path, and the launch prompt states that the spawn cwd is a launch artifact the charter's mandatory cd resolves.
No backticks inside an agent() prompt's template literal. Charters routinely quote code, and a single backtick terminates the script's template literal — the whole Workflow dies at launch with a script parse error. Quote code fragments in charter prose with regular quotes instead. Say in the charter that this quoting is a constraint on the charter's own text, never a property of the work — a builder once shipped documentation stripped of backticks because its charter said "backtick-free", and the restore had to be a follow-up commit.
Model selection
Tier names are version-agnostic: fable, opus, and sonnet are Claude Code model aliases that always resolve to the current model of each family — never pin a specific version in this skill.
Match the tier to the work:
Fable — reserved for the highest-judgment work only: the main orchestrator session, architecture, UX/UI design, the hardest coding tasks and problems, and final QA — the last pre-merge audit of a lane, judging with real discernment whether the work truly meets our quality bar. Work is never merged on a lower tier's word alone.
Opus — the default workhorse for everything below that bar: regular feature builds and implementation, fix passes, design-doc drafting within a settled architecture, code review with ≤5 subagents, and agent-browser end-to-end manual testing.
Sonnet — code review with more than 5 subagents (multi-dimension adversarial reviews) and similar wide fan-out work.
When a tier is unavailable (a weekly or rate limit), substitute the nearest capable tier and record the substitution in the ledger. (Standing example: when Fable's weekly limit is reached, Fable-tier work runs on Opus at xhigh until tokens return.)
Reasoning effort
Pair every model with a fixed reasoning effort — always:
Opus → xhigh.
Sonnet → xhigh.
Fable → high.
(When a tier is substituted for another, the effort follows the model actually running: Opus standing in for Fable still runs at xhigh.)
How to set it:
Dynamic workflows (agent()): pass effort on every call alongside model — e.g. agent(prompt, { model: 'sonnet', effort: 'xhigh', schema, ... }). Omitting effort inherits the session effort, which is not guaranteed to match this rule, so always set it explicitly.
The Agent tool: it has no per-call effort parameter — a directly-spawned subagent inherits the current session's reasoning effort. You cannot raise a single Agent-tool spawn to xhigh in isolation. To guarantee a required effort, either launch that agent from a workflow (where effort is settable) or run the whole session at the target effort. Call out this limitation whenever it bites (e.g. a directly-spawned agent-browser Opus run that you want at xhigh).
