sonar-integrate

name	sonar-integrate
description	Installs sonarqube-cli if not already installed, authenticates, and integrates SonarQube with the current agent (installs analysis hooks & SonarQube MCP Server). Use when the user wants to set up SonarQube integration or asks to configure SonarQube.
allowed-tools	Bash(which:*), Bash(Get-Command:*), Bash(sonar:*), Bash(agy:*), Bash(curl:*), Bash(irm:*), Bash(iex:*), Bash(brew:*), Bash(mise:*), Bash(docker ps:*), Bash(podman ps:*), Bash(nerdctl ps:*)

Integrate SonarQube

Guide the user through installing sonarqube-cli (if needed), updating it to the latest version when already installed, authenticating, and completing agent-specific integration. Assume SonarQube itself is already set up; this skill only wires the assistant.

Instructions

Interaction rule: for every finite decision, always present predefined selector options (single-choice or multi-choice as appropriate) instead of asking for free-form text. If the user gives an invalid answer, re-show the same selector.

Step 1 — Check for sonarqube-cli and update it

Check if sonar is available on the PATH by running which sonar (macOS/Linux) or Get-Command sonar (Windows) yourself.

If found: first determine how it was installed, because the upgrade path differs:

• Managed by a package or version manager (e.g. installed via Homebrew or mise — the binary lives under the manager's prefix rather than ~/.local/share/sonarqube-cli/bin): do not run sonar self-update, as it conflicts with the manager. Run the manager's upgrade command yourself instead (Homebrew: brew upgrade --cask sonarqube-cli; mise: mise upgrade aqua:SonarSource/sonarqube-cli), then go to Step 2. If the upgrade fails, show the output but still continue to Step 2 as long as sonar remains usable.
• Installed via the shell/PowerShell script, or unsure: run sonar self-update yourself and wait for it to finish.
  • If it succeeds: briefly tell the user the CLI is up to date (or was upgraded), then go to Step 2.
  • If it fails: show the relevant output, suggest they run sonar self-update manually (e.g. offline or network issues), then still continue to Step 2 if sonar remains usable — do not block the rest of the flow unless the binary is missing or broken.

If not found: pick an install command from the table below, show it to the user, and ask for explicit confirmation before running it. Do not execute the command until the user confirms.

The shell/PowerShell script is the default and works everywhere. If the user already manages CLIs with Homebrew or mise, prefer that route so future upgrades stay managed by the tool — the Step 1 update above then defers to the manager.

Platform / method	Install command
macOS / Linux (script)	curl -o- https://raw.githubusercontent.com/SonarSource/sonarqube-cli/refs/heads/master/user-scripts/install.sh | bash
macOS / Linux (Homebrew)	brew install --cask sonarqube-cli
Any OS (mise)	mise use -g aqua:SonarSource/sonarqube-cli
Windows (PowerShell)	irm https://raw.githubusercontent.com/SonarSource/sonarqube-cli/refs/heads/master/user-scripts/install.ps1 | iex

If the user confirms: run the command yourself using a shell command. After it finishes, re-run the PATH check (which sonar or Get-Command sonar) yourself to verify before continuing.

If the user declines: stop the skill and ask the user to install sonarqube-cli manually and then re-invoke the sonar-integrate skill.

---

Step 2 — Check authentication status

Run sonar auth status yourself using a shell command.

If already authenticated: note the connected server and organisation from the output, then skip directly to Step 4.

If not authenticated: proceed to Step 3.

---

Step 3 — Authenticate (sonar auth login)

This step requires user interaction — do not run it yourself.

First determine the connection type using a single-choice selector with these options:

1. SonarQube Cloud - EU (default)
2. SonarQube Cloud - US
3. Self-hosted SonarQube Server

Do not ask an open-ended text question for this decision.

Collect:

Scenario	Information needed
SonarQube Cloud — EU (default)	organization key (e.g. my-org)
SonarQube Cloud — US	organization key + confirm US region (https://sonarqube.us)
SonarQube Server	server URL (e.g. https://sonarqube.yourcompany.com)

Build the login command and show it to the user:

Scenario	Command
SonarQube Cloud — EU	sonar auth login -o <org-key>
SonarQube Cloud — US	sonar auth login -o <org-key> -s https://sonarqube.us
SonarQube Server	sonar auth login -s <server-url>

Tell the user:

"Run the command below — it will open your browser to log in. The token is stored securely in your system keychain and never appears in this chat."

Wait for the user to confirm they logged in, then run sonar auth status yourself to verify before continuing.

---

Step 4 — Agent-specific integration

Container runtime requirement: The SonarQube MCP Server runs inside a container, started via sonar run mcp (which detects Docker, Podman, or Nerdctl). A container runtime must be installed and running for the MCP tools to load — otherwise integration can complete successfully yet no mcp__sonarqube__* tools appear in the session. Verify this yourself: run docker ps (falling back to podman ps / nerdctl ps). If one succeeds, the runtime is up — proceed. If none do, tell the user their container runtime is not running and ask them to start it, then note they must restart the agent session afterward for the tools to load (starting the daemon and restarting the session are the only parts you cannot do for them).

Pick exactly one branch below based on which agent you are. Do not run the other branches.

• Claude Code -> 4.a
• Copilot CLI -> 4.b
• Codex -> 4.c
• Cursor -> 4.d
• Antigravity -> 4.e
• Gemini CLI -> 4.f

4.a — Claude Code (sonar integrate claude)

Run sonar integrate claude, which configures the SonarQube MCP Server, secrets-scanning hooks, and any other supported integration the CLI applies.

It wires MCP (for skills like sonar-quality-gate, sonar-analyze, sonar-coverage, sonar-duplication, sonar-dependency-risks) and secrets-scanning hooks into the user’s Claude Code config. When available, SonarQube Vortex analysis hooks are also installed.

Ask the user using a single-choice selector with these options:

1. Current project only (default)
2. Global (all projects)

Do not ask an open-ended text question for this decision.

Then run the appropriate command yourself using a shell command, and adding --non-interactive:

Scenario	Command
Project-only	sonar integrate claude --non-interactive
Global	sonar integrate claude --global --non-interactive

4.b — Copilot CLI (sonar integrate copilot)

Run sonar integrate copilot, which configures the SonarQube MCP Server, secrets-scanning hooks, and any other supported integration the CLI applies.

It wires MCP (for skills like sonar-quality-gate, sonar-analyze, sonar-coverage, sonar-duplication, sonar-dependency-risks) and secrets-scanning hooks into the user’s Copilot CLI config.

Ask the user using a single-choice selector with these options:

1. Current project only (default)
2. Global (all projects)

Do not ask an open-ended text question for this decision.

Then run the appropriate command yourself using a shell command, and adding --non-interactive:

Scenario	Command
Project-only	sonar integrate copilot --non-interactive
Global	sonar integrate copilot --global --non-interactive

4.c — Codex (sonar integrate codex)

Run sonar integrate codex, which configures the SonarQube MCP Server, secrets-scanning hooks, and—when your SonarQube Cloud org has Vortex analysis—a PostToolUse hook on apply_patch that surfaces findings inline after edits.

Ask the user using a single-choice selector with these options:

1. Current project only (default)
2. Global (all projects)

Do not ask an open-ended text question for this decision.

Then run the appropriate command yourself using a shell command, and adding --non-interactive:

Scenario	Command
Project-only	sonar integrate codex --non-interactive
Global	sonar integrate codex --global --non-interactive

If the project key is not already known from sonar-project.properties or prior context, add --project <key> to the project-only command.

4.d — Cursor (sonar integrate cursor)

Run sonar integrate cursor, which configures secrets-scanning hooks (beforeSubmitPrompt, beforeReadFile, and preToolUse), MCP, Context Augmentation (when entitled), and Vortex analysis instructions (when entitled, project scope only).

Ask the user using a single-choice selector with these options:

1. Current project only (default)
2. Global (all projects)

Do not ask an open-ended text question for this decision.

Then run the appropriate command yourself using a shell command, adding --non-interactive:

Scenario	Command
Project-only	sonar integrate cursor --non-interactive
Global	sonar integrate cursor --global --non-interactive

If the project key is not already known from sonar-project.properties or prior context, add --project <key> to the project-only command.

After integrate completes, tell the user to enable the MCP server manually in Cursor: open Settings → MCP, find the sonarqube entry, and toggle it on. Also tell the user to ensure a container runtime (Docker, Podman, or Nerdctl) is running. A Cursor session restart may be needed for the tools to appear.

4.e — Antigravity (sonar integrate antigravity)

Run sonar integrate antigravity, which configures secrets-scanning hooks, prompt-secrets and Vortex analysis instructions, Context Augmentation (when entitled), and MCP in the Antigravity harness.

Ask the user using a single-choice selector with these options:

1. Current project only (default)
2. Global (all projects)

Do not ask an open-ended text question for this decision.

Then run the appropriate command yourself using a shell command, adding --non-interactive:

Scenario	Command
Project-only	sonar integrate antigravity --non-interactive
Global	sonar integrate antigravity --global --non-interactive

If the project key is not already known from sonar-project.properties or prior context, add --project <key> to the project-only command.

Tell the user to ensure a container runtime (Docker, Podman, or Nerdctl) is running, and to restart the Antigravity session if MCP tools do not appear after integrate completes.

4.f — Gemini CLI (legacy)

Gemini CLI starts the SonarQube MCP Server via sonar run mcp, which handles container runtime detection (Docker, Podman, Nerdctl) and authentication automatically. Authentication was handled in Steps 2–3.

Confirm that integration is ready — the MCP server will start automatically when Gemini CLI reads gemini-extension.json.

Recommend migrating to Antigravity (4.e): run agy plugin import gemini, then sonar integrate antigravity. Gemini CLI did not support SonarQube hooks or Vortex analysis wiring.

---

Summary message

After all steps complete, print a summary:

✅ SonarQube integration is ready.

  sonarqube-cli:     up to date
  Authentication:    token stored in system keychain
  MCP Server:        configured (ensure a container runtime (Docker, Podman, or Nerdctl) is running, then restart the agent session if tools do not appear)