pu

name

pu

description

Provision and drive a `pu` box — an Incus container used as a clean Linux host for CI, builds, and evidence capture. Use when you need to run something on a fresh remote box instead of the user's machine: `nix run` a build, run CI against a real host, capture screenshots/video off-machine, or reproduce on a pristine environment. Covers create/connect/scp/destroy, running remote commands, copying artifacts back, and the no-egress failure mode. Triggers on "pu box", "spin up a box", "run this on a box", "ephemeral host", "pu create/connect/destroy".

pu — on-demand Incus boxes

pu hands out Linux containers. Each box is a clean NixOS host with Nix

• flakes, reachable over SSH through pu's own proxy. Use one whenever work should run off the user's machine — a CI run, a nix run build, evidence capture — so nothing local is at risk and the environment is reproducible. A box can be short-lived (spin up, use, destroy) or kept around long-term — the lifetime is yours to choose.

Lifecycle

pu create "$host"          # create; writes ~/.pu-state/$host/ssh_config
pu list                    # NAME + LOCATION (the physical host it landed on)
pu connect "$host"         # interactive ssh
pu connect "$host" -- CMD  # run CMD on the box and return
pu destroy "$host"         # tear down — always do this when finished

Name is positional. Pick a descriptive, collision-free name (e.g. app-pr-42-evidence).

pu connect is the reliable way in — it reads ~/.pu-state/$host/ssh_config itself, so it needs no setup. Bare ssh "$host" works only if you've added Include ~/.pu-state/*/ssh_config to ~/.ssh/config (optional, often not set up); otherwise use pu connect, or pass the config explicitly: ssh -F ~/.pu-state/$host/ssh_config "$host".

Run commands on the box

# One-shot
pu connect "$host" -- 'uname -a'

# Background a long-running server (nohup so it survives the SSH session)
pu connect "$host" -- "nohup nix run github:owner/app -- --port 8080 >/tmp/app.log 2>&1 &"

# Poll until it's healthy
pu connect "$host" -- 'until curl -sf http://127.0.0.1:8080/health; do sleep 2; done'

The box has its own loopback — bind servers to 127.0.0.1 on whatever port you like; there is no clash with anything on the user's machine.

Copy artifacts back

pu connect is SSH, so scp works against the box's generated config:

scp -F ~/.pu-state/"$host"/ssh_config "$host":/tmp/out.png /tmp/out.png

Failure mode: no outbound network

A box occasionally lands on a host with broken egress — DNS and even raw-IP TCP time out, so nix run github:... hangs on "Resolving timed out". This is host-specific, not your fault. Probe egress first; if it fails, destroy and recreate (a fresh box usually lands on a healthy host):

pu connect "$host" -- 'timeout 15 curl -sS -o /dev/null -w "%{http_code}\n" https://api.github.com' \
  || { echo "no egress — recreating"; pu destroy "$host"; pu create "$host"; }

If retries keep landing on dead hosts, capture diagnostics for the admin — the box's LOCATION from pu list, /etc/resolv.conf, ip route, and a /dev/tcp connect test to the gateway and to a raw IP — and hand them over (e.g. a gist).