perf-report

name	perf-report
description	Generate, refresh, and validate an LLK performance report by running a perf sweep end to end and checking the resulting perf_data CSV. Use when asked to produce or refresh a perf report for an op, run a perf sweep, or when a report is missing, partial, stale, or implausible.

Perf Report

Goal

Produce a trustworthy performance report for one LLK perf test and hand it to analysis with enough provenance to reproduce it.

A report is a build artifact, not a repository file: perf_data/ is gitignored. What identifies a report is the test, the architecture, the commit, and the exact command that produced it. Record all four.

Related skills

• quasar-perf-test — create or repair the perf test and its PerfRunType paths, and choose tile/dimension coverage. Use it first when the test does not exist, hangs, reports implausible metrics, or needs sweep-axis changes.
• perf-parameter-impact — analyze a finished .post.csv.
• run-test — the repository test-runner workflow.

1. Establish the sweep

Read the perf test — tests/python_tests/perf_[op].py or tests/python_tests/quasar/perf_[op]_quasar.py — and determine:

• which run_types the test actually reports;
• loop_factor, tile_cnt, and the other axes recorded as columns;
• how many variants @parametrize produces;
• the architecture: the quasar/ directory or a *_[arch].py suffix implies it, otherwise ask.

For Quasar, compare_test_and_perf.py --dir quasar is the sweep-audit against the functional counterpart (composite list = matrix, tuple = tile shape). Flag stale-report risk when current test axes are absent from the CSV.

Decide scope before running. A narrowed sweep (-k, --op) is right for debugging; a report meant for analysis must cover the full intended sweep. Never narrow the sweep in the test file to make a run finish.

2. Run the sweep

Use the two-phase producer/consumer flow, never a single serial invocation:

cd tests
CHIP_ARCH=<arch> pytest --compile-producer -n 10 -m perf ./python_tests/perf_[op].py
CHIP_ARCH=<arch> pytest --compile-consumer -n 15 -m perf ./python_tests/perf_[op].py

Prefer the run-test workflow where it applies; it serializes simulator access and diagnoses hangs. tests/run_llk_perf_wormhole.sh and tests/run_llk_perf_blackhole.sh show the exact CI invocation.

Rules:

• --speed-of-light turns runtime parameters into compile-time constants and changes measured cycles. CI passes it. Match CI when the report will be compared with CI numbers, and never mix speed-of-light and normal rows in one report.
• --enable-perf-counters produces a different, mutually exclusive kind of report. It compiles with -DPERF_COUNTERS_COMPILED (the WC build), which reduces ZONE_SCOPED to metadata only: the run emits no wall-clock mean(<run type>) columns, only <RUN_TYPE>_..._pct efficiency columns. It also writes to the same <module>.csv path, overwriting the timing report. Move the timing report out of the way first (see Refresh and compare), run counters as a separate sweep, and validate the result as a counter report. --dump-perf-counters additionally writes raw counter values to <module>.counters.csv.
• Perf counters are unavailable on Quasar. The build gate keeps the define off there and counters.h #errors if it ever slips through, so the flag yields no counter columns.
• SFPU sweep modules need --mode perf; the selector defaults to accuracy and deselects the perf sweep.
• Do not pass --coverage. Instrumentation invalidates perf numbers.
• Avoid -x on a report run. It aborts mid-sweep and the combined CSV is silently partial. Use it only while debugging.
• Never hand-edit a CSV. Fix the test or rerun.

3. Know where the files come from

• Each worker writes <module>.<worker>.csv and <module>.<worker>.post.csv into /tmp/tt-llk-build/temp_perf_data/ when the module-scoped perf_report fixture tears down. Under GitHub Actions the root is $RUNNER_TEMP/tt-llk-build instead. The worker is gw0, gw1, … under -n, otherwise master. Look there for partial artifacts after an aborted run.
• pytest_sessionfinish calls combine_perf_reports(), which merges the per-worker files into perf_data/runs/<tag>/<module>/<module>.csv, <module>.post.csv, and <module>.counters.csv, sorts them, and deletes the per-worker files. Each run writes its own runs/<tag>/ directory and perf_data/latest is repointed at it, so a rerun neither overwrites an earlier report nor leaves part of one behind. PERF_KEEP_RUNS (default 10) bounds how many runs are retained. PERF_RUN_TAG sets the tag; off CI it defaults to local-<utc timestamp>.
• The producer phase writes no report and skips combining.
• The raw CSV holds per-marker means. The .post.csv divides the mean(...) and std(...) columns of TILE_LOOP rows by loop_factor * tile_cnt, giving cycles per tile; INIT and KERNEL rows are left unnormalized. Analysis uses .post.csv.

No report at all usually means the consumer phase never reached session finish, or every selected test was skipped.

4. Validate the artifact

1. Schema. A PerfSchemaError means one test emits different columns across its sweep — usually a parameter that is None for some values — or two ops share one module. Fix the test; do not work around it.
2. Row count. Reconcile rather than assert equality. Start from selected variants × markers, then subtract skipped or deselected variants; duplicate keys are rejected, never merged. Markers are the zones the kernel declares — INIT and TILE_LOOP in the perf sources, plus the KERNEL zone that trisc.cpp wraps around every profiler build. A counter report has no profiler-derived rows, so expect only the counter zones INIT and TILE_LOOP there. An unexplained shortfall means an aborted or partly skipped sweep; a shortfall you can attribute to skips or collapse is fine.
3. Duplicate keys. combine_perf_reports() warns when it collapses rows sharing a (sweep, marker) key. Differing metrics on a collapsed key are either run-to-run noise or a parameter that changes the kernel without being recorded as a column. Resolve which before shipping the report.
4. Plausibility. Inspect marker == TILE_LOOP. Each L1_CONGESTION stage should sit near its isolate. Values near 2048, 4096, or 8192, an isolate orders of magnitude above the real stage, or a healthy first variant followed by slow ones all indicate handshake or wait-mask bugs — switch to quasar-perf-test.
5. Freshness. Compare CSV columns with the current test axes. Missing axes mean the report predates the test; regenerate instead of analyzing.
6. Completeness, by report kind. A timing report carries a mean(<run type>) column for every requested run type, and a TEXT_SIZE(<run type>) column only for L1_TO_L1, UNPACK_ISOLATE, MATH_ISOLATE, and PACK_ISOLATE. L1_CONGESTION is deliberately absent from the code-size map, so a missing TEXT_SIZE(L1_CONGESTION) is correct rather than a defect. A counter report has no wall-clock means at all: check its <RUN_TYPE>_..._pct columns, expect only the INIT and TILE_LOOP markers, and note that its .post.csv is identical to the raw file because normalization only rescales columns named and .

Never present metrics from a run whose pytest phase failed.

5. Record provenance

Report back, and keep alongside the CSV when it is archived:

• test file and module name;
• architecture and CHIP_ARCH;
• repository commit;
• the exact producer and consumer commands, including worker counts, --speed-of-light, and counter flags;
• run types and markers present;
• row count and output paths.

Refresh and compare

• Nothing needs moving aside. Each run lands in its own perf_data/runs/<tag>/ and the previous run is untouched, so a rerun that skips everything or dies before the consumer phase cannot leave an earlier CSV looking like the new result. Read the run you mean, not latest, when comparing two runs.
• A counter run is still a separate report kind from a timing run, and the two share no metric columns — but they now land in different run directories, so one no longer replaces the other.
• Compare like with like: same architecture, same speed-of-light setting, same loop_factor and marker, and the same report kind. Timing and counter reports measure different things and share no metric columns.
• Repeat a run before attributing a small delta to a code change.

Checklist

• Test, architecture, and intended scope confirmed.
• Producer and consumer phases both completed without aborting.
• Coverage off; speed-of-light setting deliberate and uniform.
• The report read is the run you just did — perf_data/latest, or the runs/<tag>/ you intended.
• perf_data/runs/<tag>/<module>/ holds the raw and .post.csv files, plus counters when requested.
• Single schema, row count reconciled, duplicate warnings reviewed.
• Column expectations applied for the report kind actually produced.
• TILE_LOOP metrics inspected for plausibility.
• Columns match the current test sweep.
• Provenance recorded.
• Report handed to perf-parameter-impact for analysis.

Example triggers

• “Generate a perf report for perf_matmul_quasar.py.”
• “Refresh the SFPU unary report and tell me what changed.”
• “Why is there no .post.csv for this test?”
• “Is this report stale?”