gum-forms-behaviors

name	gum-forms-behaviors
description	Gum's behaviors system and the design-time → runtime Forms wrapping lifecycle. Triggers: BehaviorSave, ElementBehaviorReference, StandardFormsBehaviorNames, FormsUtilities.RegisterFromFileFormRuntimeDefaults, DefaultFromFile*Runtime classes, Forms properties not settable at design time.

Gum Forms Behaviors

What Behaviors Are

Behaviors are named capability contracts stored as .behx XML files in the project's Behaviors/ folder. Each behavior (BehaviorSave) declares:

• A Name (e.g. "ButtonBehavior")
• Required visual state Categories (with state names like Enabled/Disabled/Highlighted/Pushed)
• Optional RequiredVariables and RequiredInstances
• A DefaultImplementation path pointing to the default visual (e.g. "Controls/ButtonStandard")

An ElementSave (component or screen) opts into a behavior via a List<ElementBehaviorReference>, where each reference holds only a BehaviorName string. This is the signal used at runtime to select which Forms control wraps the visual.

The Wrapping Lifecycle

At project load time, call order is:

1. FormsUtilities.RegisterFromFileFormRuntimeDefaults() iterates every component in the loaded GumProjectSave, checks each component's Behaviors list against constants in StandardFormsBehaviorNames, and calls ElementSaveExtensions.RegisterGueInstantiationType(component.Name, typeof(DefaultFromFileXxxRuntime)) for each match.

2. DefaultFromFileXxxRuntime (in MonoGameGum/Forms/DefaultFromFileVisuals/) is an InteractiveGue subclass selected as the runtime type. Its AfterFullCreation() override fires after the full visual tree is instantiated. Inside AfterFullCreation(), the runtime sets FormsControlAsObject = new Button(this) (passing itself as the visual), completing the pairing.

3. ReactToVisualChanged() fires on the Forms control when its Visual is assigned. The control caches named child references (Visual.GetGraphicalUiElementByName(...)) and base.ReactToVisualChanged() subscribes to input events and calls UpdateState().

The DefaultFromFileXxxRuntime classes exist solely to bridge the file-loading path into the Forms object model. They are distinct from the DefaultVisuals classes (which serve the code-only construction path).

Behavior → Forms Control Mapping

StandardFormsBehaviorNames constants → DefaultFromFile runtime registered:

Behavior name constant	Runtime type
ButtonBehaviorName	DefaultFromFileButtonRuntime
CheckBoxBehaviorName	DefaultFromFileCheckBoxRuntime
ComboBoxBehaviorName	DefaultFromFileComboBoxRuntime
ListBoxBehaviorName	DefaultFromFileListBoxRuntime
TextBoxBehaviorName	DefaultFromFileTextBoxRuntime
LabelBehaviorName	DefaultFromFileLabelRuntime / DefaultFromFileLabelTextRuntime
ItemsControlBehaviorName	DefaultFromFileItemsControlRuntime
RadioButtonBehaviorName	DefaultFromFileRadioButtonRuntime
SliderBehaviorName	DefaultFromFileSliderRuntime
ScrollBarBehaviorName	DefaultFromFileScrollBarRuntime
ScrollViewerBehaviorName	DefaultFromFileScrollViewerRuntime
MenuBehaviorName	DefaultFromFileMenuRuntime
MenuItemBehaviorName	DefaultFromFileMenuItemRuntime
PasswordBoxBehaviorName	DefaultFromFilePasswordBoxRuntime
PanelBehaviorName	DefaultFromFilePanelRuntime
StackPanelBehaviorName	DefaultFromFileStackPanelRuntime
WindowBehaviorName	DefaultFromFileWindowRuntime

The Property Promotion Gap (closed for logical + state-mapped)

The Gum tool operates at the visual layer — layout, colors, fonts, dimensions saved as VariableSave entries. The Forms behavioral layer (state, data, interaction) is added at runtime. Two mechanisms now bridge the save model into Forms semantics: FormsProperties for the value-on-the-control half, and ToolOnlyVariableReferences for the design-time visual-state preview half.

BehaviorSave.FormsProperties (v1)

A List<VariableSave> declaring design-time properties that flow through to the wrapped FrameworkElement at runtime via reflection. Each entry's Name must match a property on the control (e.g. ToolTip, IsEnabled); Value is the declared default (used as a fallback tier — see below).

The variable grid synthesizes a "Behavior" category for these declarations on both the component definition and any instance (ElementSaveDisplayer.AddBehaviorFormsPropertyMembers). When a component sets a default on a promoted property under General, the displayer relocates it into "Behavior" to keep categorization consistent.

BehaviorSave.ToolOnlyVariableReferences (v2)

A List<string> of variable-reference assignments evaluated only at design time to drive wireframe preview. Example on ButtonBehavior:

ButtonCategoryState = IsEnabled ? "Enabled" : "Disabled"

Tool-time apply (BehaviorToolOnlyReferencesApplier, in the variable-grid plugin) walks every linked behavior's ToolOnlyVariableReferences, evaluates the RHS via EvaluatedSyntax against the component's effective state, and writes the resolved value back into the state via SetValue. For instances, bare RHS identifiers are auto-qualified with the instance name. Hooked into VariableReferenceLogic.DoVariableReferenceReaction immediately after the existing state-level apply.

The runtime apply path never traverses this list — that's what the ToolOnly name encodes structurally. At runtime, the Forms control's own setter (e.g. FrameworkElement.IsEnabled → UpdateState()) owns the visual; applying the reference again would double-write.

Three-tier default resolution

Both apply paths plus the variable-grid display getter consult the same priority order:

1. Parent-state instance override (e.g. screen state "ButtonInstance.IsEnabled")
2. Component's own default state value
3. Behavior-declared FormsProperty.Value (the implicit default)

Tier 3 is virtual — never written to state, never appears in .gusx. State-empty stays state-empty. The fallback machinery:

• RecursiveVariableFinder.Fallback (Func<string, object?>?) — consulted when state lookup returns null.
• EvaluatedSyntax.FromSyntaxNode takes an optional fallback parameter threaded through every recursive evaluation.
• BehaviorToolOnlyReferencesApplier builds a per-element fallback that walks every linked behavior's FormsProperties and resolves bare or instance-qualified identifiers to declared Value.
• BehaviorFormsPropertyApplier.Apply adds the third tier inline: ReadEffectiveValue(...) ?? declaration.Value.
• StateReferencingInstanceMember.DefaultValueFallback lets the variable grid show the declared default in the checkbox/text without writing into state. IsDefault still returns true (state empty), preserving the grid's italic/grey styling.

VariableSave.Description (v3)

Authored documentation persisted alongside the FormsProperty declaration in the .behx. ElementSaveDisplayer.AddBehaviorFormsPropertyMembers seeds each row's srim.DetailText from the declaration's Description when surfacing behavior-promoted variables, so the variable grid shows authored docs by default. Distinct from the [XmlIgnore] DetailText field, which holds transient state-dependent hints set by tool/plugin code at runtime; see the cross-referencing XML docs on both fields. Use Description only when a property's name is ambiguous, has overlapping siblings (e.g. MaxLength vs MaxLettersToShow), or assumes prior framework knowledge.

Covered today

Snapshot, not a live reference. Standard Forms behaviors (.behx) and components (.gucx) are copied into the project when Forms controls are added — the Add Forms dialog (and new-project setup) copies the chosen theme into the project via FormsFileService. Two themes ship, and a fix usually belongs in both: Tools/Gum.ProjectServices/Templates/FormsTemplate/ — exposed as the Standard theme, so the source folder name differs from the theme name — and Tools/Gum.ProjectServices/Templates/FormsThemes/Bubblegum/. (GumFormsPlugin's post-build stages both under Content/FormsThemes/{Standard,Bubblegum}/, which is what FormsFileService reads.) Later improvements — new FormsProperty declarations, new ToolOnlyVariableReferences, additional VariablesHiddenFromInstances entries — do not retroactively reach controls already copied into a project; only controls added afterward from an updated tool build get them. So a "feature works in a new project but not mine" report usually means the project's copy predates the improvement. (Concrete case: a project whose TextBoxBehavior lacks the TextWrapping FormsProperty and whose Controls/TextBox.gucx doesn't yet hide LineModeCategoryState — the user set the raw visual line-mode to Multi, the text wraps, but the forms line-mode never engages and the caret stays single-line.)

State-mapped (FormsProperty + ToolOnlyVariableReference, three-tier default resolution):

• IsEnabled — every standard Forms behavior. Behaviors with no Disabled visual still get the FormsProperty (runtime reflection works) but no reference (no visual state to drive).
• IsChecked — CheckBox, RadioButton, Toggle, with nested-ternary references combining IsEnabled and IsChecked into the appropriate <X>CategoryState slot.
• VerticalScrollBarVisibility — ScrollViewer, mapped to the existing ScrollBarVisibility category via ScrollBarVisibilityState = VerticalScrollBarVisibility == "Hidden" ? "NoScrollBar" : "VerticalScrollVisible". The == comparison relies on the enum↔string bridge in EvaluatedSyntax.AreEqual — see the gum-tool-save-classes skill for the int-on-disk vs boxed-enum-in-memory roundtrip. Project-side state authoring decides what each state actually changes visually.
• TextWrapping + AcceptsReturn — TextBox. The line-mode pair: both drive the visual LineModeCategory (Single/Multi) via LineModeCategoryState = TextWrapping == "Wrap" ? "Multi" : (AcceptsReturn ? "Multi" : "Single"), mirroring the runtime's TextBoxBase.UpdateStateForSingleOrMultiLine. LineModeCategoryState is hidden via VariablesHiddenFromInstances on Controls/TextBox.gucx so the forms properties are the single source of truth. The TextBox component has only Single/Multi (no MultiNoWrap), so the AcceptsReturn-only case collapses to Multi, matching the runtime fallback. Caret/line math keys off these forms properties (TextBoxBase.IsSingleLineMode), not the visual state — so a project that sets the visual LineModeCategoryState directly (e.g. an older project where it isn't hidden) wraps the text but leaves the caret single-line. PasswordBox declares both FormsProperties but its component has no LineModeCategory, so no reference is wired there.

Logical-only (FormsProperty only — runtime reflects directly):

• ToolTip — every standard Forms behavior.
• TextBox/PasswordBox: AcceptsTab, IsReadOnly, Placeholder, MaxLength (int?).
• TextBox-only: MaxLettersToShow (int?), MaxNumberOfLines (int?).
• Slider/ScrollBar (RangeBase): Minimum, Maximum, Value, SmallChange, LargeChange.
• Slider-only: TicksFrequency, IsSnapToTickEnabled.
• ScrollViewer: SmallChange, LargeChange (fanned to inner scroll bars by ScrollViewer's setters), HorizontalScrollBarVisibility.
• ItemsControl/ListBox: Orientation (Orientation?).

Value-alias (FormsProperty name ≠ the underlying visual variable name — needs both a reference and hiding):

• Spacing → StackSpacing — StackPanel. Same value, two names (the Forms Spacing setter is a pass-through to the visual StackSpacing). BehaviorFormsPropertyApplier resolves by the FormsProperty name (Spacing), so it never sees an authored StackSpacing and writes the behx default — silently clobbering the authored value at runtime. Bridge with a StackSpacing = Spacing ToolOnlyVariableReference for design-time preview, and hide StackSpacing via VariablesHiddenFromInstances on Controls/StackPanel.gucx (mirrors ButtonStandard.gucx hiding ButtonCategoryState) so Spacing is the single source of truth. Without the hiding, both names stay editable and the reference overwrites a hand-set StackSpacing on the next reaction.
• Orientation → ChildrenLayout — StackPanel. Enum→enum mapping: ChildrenLayout = Orientation == "Horizontal" ? "LeftToRightStack" : "TopToBottomStack". Unlike the float-identity Spacing case, this depends on variable-reference enum coercion (EvaluatedSyntax.CastTo parses the string name into the boxed ChildrenLayout — see [[gum-tool-variable-references]]); without it the materialized string is dropped by the typed ChildrenLayout setter. ChildrenLayout is hidden on instances alongside StackSpacing. (Orientation's setter already forces a stack layout at runtime, so hiding it loses no honored capability.)

Wireframe incremental-update gotcha (value-alias). A value-alias name (Spacing, Orientation) is not a real GraphicalUiElement property, so the editor's incremental preview path (MainEditorTabPlugin.HandleVariableSetLate, gated by PropertiesSupportingIncrementalChange) can't push it onto the live GUE. Left unhandled, every scrub tick of the alias falls back to a full WireframeObjectManager.RefreshAll rebuild (~1 fps — issue #3191). The bridge is BehaviorToolOnlyReferencesApplier.GetUnderlyingMembersDrivenBy(element, instance, changedMember): it resolves the alias to the underlying visual variable(s) the behavior reference drives (Spacing→StackSpacing), whose already-materialized value is then pushed via gue.SetProperty. The underlying name (not the alias) is what belongs in PropertiesSupportingIncrementalChange.

Nullable type declarations. When a Forms control's property is int? (or Orientation?) and null is meaningful, declare the ? in FormsProperty.Type (e.g. Type="int?", Type="Orientation?") so the variable grid renders the nullable editor and authors can clear back to null. The runtime applier reflects on prop.PropertyType regardless, so coercion works either way.

Enum-typed FormsProperty declarations. Author the default Value as a string (<Value xsi:type="xsd:string">Auto</Value>) — the applier's IsEnum branch parses it via Enum.Parse. The variable grid resolves the enum's name string (e.g. Type="ScrollBarVisibility") via TypeManager.GetTypeFromString, so the type must live in or be linked into a TypeManager-scanned assembly (Gum.exe, GumCommon, or GumDataTypes). TextWrapping, ScrollBarVisibility, and Orientation are physically in MonoGameGum/Forms/ but <Compile Include>-linked into GumCommon.

Reflection apply is generic, so any new logical-only FormsProperty declaration flows through without runtime changes. State-mapped properties beyond what's listed follow the same shape: declare the FormsProperty(/ies) plus a ToolOnlyVariableReference driving the appropriate <X>CategoryState.

Key Files

Path	Purpose
GumDataTypes/Behaviors/BehaviorSave.cs	Behavior definition model (.behx)
GumDataTypes/Behaviors/ElementBehaviorReference.cs	Per-element reference holding only BehaviorName
GumDataTypes/Behaviors/StandardFormsBehaviorNames.cs	String constants for all standard behavior names
GumDataTypes/ElementSave.cs	Behaviors list on components/screens
MonoGameGum/Forms/FormsUtilities.cs	RegisterFromFileFormRuntimeDefaults() — drives the mapping; sets InitialStateAppliedNotifier to invoke BehaviorFormsPropertyApplier
MonoGameGum/Forms/DefaultFromFileVisuals/	DefaultFromFileXxxRuntime classes — AfterFullCreation() creates Forms objects
MonoGameGum/Forms/BehaviorFormsPropertyApplier.cs	Reflects BehaviorSave.FormsProperties values onto the wrapped FrameworkElement (with three-tier default resolution)
Gum/Plugins/InternalPlugins/VariableGrid/BehaviorToolOnlyReferencesApplier.cs	Tool-only design-time apply pass for ToolOnlyVariableReferences. Strictly tool-only — never invoked from runtime / generated code.
Gum/Plugins/InternalPlugins/VariableGrid/ElementSaveDisplayer.cs	AddBehaviorFormsPropertyMembers — surfaces FormsProperties in the variable grid; sets DefaultValueFallback on each SRIM so the grid shows the declared default; seeds srim.DetailText from the FormsProperty's Description.
GumDataTypes/Variables/VariableSave.cs	Description (persisted, XML-serialized) and DetailText ([XmlIgnore], transient) fields with cross-referencing XML docs.
Gum/Plugins/InternalPlugins/VariableGrid/StateReferencingInstanceMember.cs	final tier in the value getter for grid display.