Skip to main content

tikz

LaTeX TikZ/PGF package for programmatic vector graphics and diagrams. Use when helping users draw flowcharts, trees, graphs, automata, circuits, geometric figures, or any custom diagram in LaTeX.

معلومات المصدر

المستودع
igbuend/grimbard
آخر نشاط في المصدر
١٢ فبراير ٢٠٢٦ في ١١:٠٥
لغة SKILL.md المكتشفة
الإنجليزية
النجوم
٩
التفرعات
١

خيارات التثبيت

يُحدَّد Prompt الذي يراجع المصدر أولًا بشكل افتراضي. يمكنك التبديل إلى أمر مباشر أو تنزيل نسخة محلية.

مراجعة ملفات المصدر

اقرأ SKILL.md وأي ملفات مرافقة يعرضها SkillsMP قبل أن تقرر التثبيت.

عرض SKILL.md

SKILL.md
تعليمات المصدر · معاينة للقراءة فقط
name
tikz
description
LaTeX TikZ/PGF package for programmatic vector graphics and diagrams. Use when helping users draw flowcharts, trees, graphs, automata, circuits, geometric figures, or any custom diagram in LaTeX.
# TikZ/PGF — Vector Graphics & Diagrams **CTAN:** https://ctan.org/pkg/pgf **Manual:** `texdoc tikz` (~1300 pages) ## Setup ```latex \usepackage{tikz} % Load libraries as needed: \usetikzlibrary{arrows.meta, calc, positioning, decorations.pathmorphing, patterns, shapes.geometric, shapes.misc, fit, backgrounds, automata, trees, mindmap, circuits.logic.US} ``` ## Basic Drawing ### Minimal Example ```latex \begin{tikzpicture} \draw (0,0) -- (2,0) -- (2,2) -- cycle; % triangle \end{tikzpicture} ``` ### Path Operations | Operation | Syntax | Example | |-----------|--------|---------| | Line | `--` | `(0,0) -- (1,1)` | | Horizontal-vertical | <code>-\|</code> | `(0,0) -| (1,1)` (go right then up) | | Vertical-horizontal | <code>\|-</code> | `(0,0) |- (1,1)` (go up then right) | | Curve | `.. controls .. ..` | `(0,0) .. controls (0.5,1) .. (1,0)` | | Smooth curve | `to[out=..,in=..]` | `(0,0) to[out=90,in=180] (2,1)` | | Arc | `arc` | `(0,0) arc (0:90:1cm)` start:end:radius | | Circle | `circle` | `(0,0) circle[radius=1]` | | Ellipse | `ellipse` | `(0,0) ellipse[x radius=2, y radius=1]` | | Rectangle | `rectangle` | `(0,0) rectangle (2,1)` | | Grid | `grid` | `(0,0) grid (3,3)` | | Parabola | `parabola` | `(0,0) parabola (2,2)` | | Sin/Cos | `sin`/`cos` | `(0,0) sin (1,1)` | | Plot | `plot` | `plot[domain=0:3] (\x, {\x^2})` | | Cycle | `cycle` | close path back to start | ### Path Actions | Command | Effect | |---------|--------| | `\draw` | Stroke the path | | `\fill` | Fill the path | | `\filldraw` | Fill and stroke | | `\path` | Invisible path (for coordinates, nodes) | | `\clip` | Clip subsequent drawing to path | | `\shade` | Gradient fill | | `\shadedraw` | Gradient fill + stroke | | `\node` | Shorthand for `\path node` | | `\coordinate` | Shorthand for `\path coordinate` | ### Common Draw Options ```latex \draw[ color=blue, % or just: blue line width=1pt, % or: thin, thick, very thick, ultra thick dashed, % or: dotted, dash dot, dash dot dot dash pattern={on 3pt off 2pt}, rounded corners=5pt, -> % arrow tip (see arrows section) opacity=0.5, double, double distance=2pt, ] (0,0) -- (2,2); ``` ### Common Fill Options ```latex \fill[ fill=blue!20, % 20% blue fill opacity=0.5, pattern=north lines, % requires patterns library pattern color=gray, ] (0,0) rectangle (2,1); ``` ## Coordinate Systems ```latex % Cartesian (default) (2, 3) % Polar (angle:radius) (45:2cm) % Relative (shift from last point) ++(1,0) % move reference point +(1,0) % don't move reference point % Named \coordinate (A) at (1,2); \draw (A) -- (2,3); % Intersection (calc library) \usetikzlibrary{calc} ($(A)!0.5!(B)$) % midpoint of A and B ($(A)!0.5!90:(B)$) % midpoint rotated 90° ($(A) + (1,2)$) % A shifted by (1,2) ($(A)!1cm!(B)$) % 1cm from A toward B % Perpendicular coordinates (A -| B) = (x of B, y of A) (A |- B) % (x of A, y of B) % Barycentric (barycentric cs:A=1,B=1,C=1) % centroid ``` ## Nodes ### Basic Nodes ```latex \node (name) at (0,0) {Text}; % Node options \node[ draw, % draw border fill=yellow!20, rectangle, % shape (default) circle, ellipse, rounded corners, minimum width=2cm, minimum height=1cm, inner sep=5pt, % padding outer sep=2pt, % margin text=red, font=\bfseries\small, align=center, % for multi-line: use \\ in text text width=3cm, anchor=north, % positioning anchor rotate=45, ] (mynode) at (1,2) {Hello\\World}; ``` ### Node Anchors ``` north west north north east ┌──────────┐ west │ center │ east └──────────┘ south west south south east ``` Also: `base`, `mid`, `text`, and angle anchors like `45`, `135`. ### Nodes on Paths ```latex \draw (0,0) -- node[above] {label} (3,0); \draw (0,0) -- node[midway, sloped, above] {sloped text} (3,2); \draw (0,0) -- node[pos=0.3, below] {at 30\%} (3,0); \draw (0,0) to[out=90,in=0] node[near start, left] {A} (2,2); ``` ### Common Shapes (requires libraries) ```latex \usetikzlibrary{shapes.geometric, shapes.misc} \node[diamond, draw] {D}; \node[star, draw, star points=5] {S}; \node[regular polygon, regular polygon sides=6, draw] {Hex}; \node[trapezium, draw] {T}; \node[cylinder, draw, shape border rotate=90] {DB}; \node[cloud, draw, cloud puffs=10] {Cloud}; \node[cross out, draw] at (0,0) {}; \node[strike out, draw] at (0,0) {}; ``` ## Arrows ```latex \usetikzlibrary{arrows.meta} % Arrow tips (arrows.meta syntax) \draw[->] (0,0) -- (1,0); % default \draw[-Stealth] (0,0) -- (1,0); % filled triangle \draw[-Latex] (0,0) -- (1,0); % larger filled \draw[-{Stealth[length=5mm]}] (0,0) -- (1,0); \draw[{Latex[red]}-{Latex[blue]}] (0,0) -- (1,0); % colored \draw[-{>[scale=2]}] (0,0) -- (1,0); % Common tips: >, Stealth, Latex, To, Circle, Square, |, Hooks % Modifiers: [length=..], [width=..], [open], [fill=..], [scale=..] ``` ## Styles ```latex % Define in preamble or tikzpicture options \tikzset{ mybox/.style = {draw, fill=blue!20, rounded corners, minimum width=2cm}, myarrow/.style = {-Stealth, thick, red}, highlight/.style = {fill=yellow, draw=orange, line width=2pt}, } % Use \node[mybox] {Box}; \draw[myarrow] (0,0) -- (1,1); % Style with parameters \tikzset{ box/.style = {draw, fill=#1!20, minimum width=1.5cm}, box/.default = blue, } \node[box] {Blue}; % default \node[box=red] {Red}; % override % every node/.style applies to all nodes \begin{tikzpicture}[every node/.style={font=\small}] ``` ## Foreach Loops ```latex % Basic \foreach \x in {0,1,2,3} \draw (\x, 0) circle (0.3); % With step \foreach \x in {0,0.5,...,3} \fill (\x,0) circle (1pt); % Multiple variables \foreach \x/\y in {0/A, 1/B, 2/C} \node at (\x, 0) {\y}; % Counter \foreach \x [count=\i] in {a,b,c,d} \node at (\i, 0) {\x}; % Evaluate \foreach \x [evaluate=\x as \y using \x*\x] in {1,...,5} \fill (\x, \y/5) circle (2pt); % Remember \foreach \x [remember=\x as \lastx (initially 0)] in {1,...,5} \draw (\lastx, 0) -- (\x, 0); ``` ## Scopes and Transformations ```latex \begin{tikzpicture} \draw (0,0) -- (1,0); \begin{scope}[shift={(2,0)}, rotate=45, scale=0.5, red, thick] \draw (0,0) -- (1,0) -- (1,1) -- cycle; \end{scope} % Transformations % shift={(x,y)}, xshift=1cm, yshift=2cm % rotate=45, rotate around={45:(1,1)} % scale=2, xscale=2, yscale=0.5 % xslant=0.5, yslant=0.5 \end{tikzpicture} ``` ## Clipping ```latex \begin{tikzpicture} \clip (0,0) circle (1.5cm); % Everything below is clipped to the circle \fill[blue!30] (-2,-2) rectangle (2,2); \draw[step=0.5, gray] (-2,-2) grid (2,2); \end{tikzpicture} ``` ## Layers (backgrounds library) ```latex \usetikzlibrary{backgrounds} \begin{tikzpicture} \node[draw, fill=white] (A) {Foreground}; \begin{pgfonlayer}{background} \fill[yellow!30] (A.south west) rectangle (A.north east); \end{pgfonlayer} \end{tikzpicture} ``` ## Pics ```latex \tikzset{ myshape/.pic = { \draw (-0.5,-0.5) rectangle (0.5,0.5); \draw (0,0) circle (0.3); } } \begin{tikzpicture} \pic at (0,0) {myshape}; \pic[rotate=45, scale=1.5] at (2,0) {myshape}; \end{tikzpicture} ``` ## Decorations ```latex \usetikzlibrary{decorations.pathmorphing, decorations.markings, decorations.text} % Wavy/zigzag lines \draw[decorate, decoration={zigzag, amplitude=2mm, segment length=5mm}] (0,0) -- (4,0);
عرض على GitHub
ملف SKILL.md هذا كبير جدا، لذلك يعرض SkillsMP القسم الاول فقط هنا. عرض على GitHub