deploy

name	deploy
description	Deploy or run the ScienceDiscovery stack, either as host processes (scripts/start-stack.sh) or with Docker Compose. Use when the user asks to deploy, start, run, or containerize ScienceDiscovery, or asks for the UI URL, SSH port forwarding, or start/stop/restart/log commands.

Deploy ScienceDiscovery (local or Docker)

Project-local skill for ScienceDiscovery. Authoritative facts live in README.md → Quick start, in docs/zh/how-to/deployment.md (Chinese) → local mode and Docker deployment, and in docs/zh/reference/configuration.md → variable tables. Read the matching section before improvising; never invent ports, tokens, flags, or paths.

You assist the user through a deployment. You do not silently reconfigure their machine.

Rules

1. Ask the deployment form first (Docker Compose vs. host processes). Do not install, build, or start anything before the user answers.
2. Detect before deploying. Environment checks are read-only commands only. Report what is missing; do not fix it on your own initiative.
3. Never run sudo on the user's behalf unless they explicitly ask for that specific command in this conversation.
4. Never install global software (apt/dnf/brew/npm -g, persistent sysctl, systemd units, editing files outside the repository). List the gap and the command you suggest the user run themselves. After written consent you may assist, still preferring project-local installs (uv/pnpm/corepack) over system-wide ones.
5. Environment must pass before deploying. On any failed check, stop, report, and wait for the user's decision.
6. Repository-local writes are fine (.env, data/), but say what you are writing before you write it.
7. After a successful start, always report the URL and the bearer token source, then the management commands for the mode actually used.

Step 1 — Ask the form

Docker Compose, or host processes?

	Docker Compose	Host processes
Host needs	Docker Engine 24+ and Compose v2 only	Node 22.19+, pnpm, Python 3, uv, bubblewrap
Entry point	docker compose up -d → scripts/start-stack.sh --mode docker	./scripts/start-stack.sh --mode local
Runs	Detached, restarts on failure	Foreground terminal (Ctrl-C stops it)
State	Host bind mount ./data (no named volume)	./data (SCIENCE_AGENT_DATA_DIR)
Published on	127.0.0.1:4310 by default	0.0.0.0:4310 by default

Both need Linux x86_64 or aarch64 with unprivileged user namespaces — the bubblewrap sandbox is not optional and Docker Desktop on macOS/Windows is unsupported.

Step 2 — Detect (read-only)

Run from the repository root. Report each check as pass/fail with the value seen.

Common

uname -s -m                              # expect: Linux x86_64 or aarch64
ss -ltn | grep -E ':(4310|4311)' || echo "ports free"
sysctl kernel.unprivileged_userns_clone             2>/dev/null   # 1, where the knob exists
sysctl kernel.apparmor_restrict_unprivileged_userns 2>/dev/null   # 0, required on Ubuntu 24.04+

Host-process mode (mirrors README.md → Quick start → Requirements)

node --version    # v22.19+
pnpm --version    # 11.1.2
python3 --version
uv --version      # 0.9+
bwrap --version   # 0.6+; 0.8+ recommended (adds --disable-userns where the environment allows it; otherwise the runner logs a startup warning and omits it)
curl --version | head -1

Sandbox preflight — the same probe scripts/start-stack.sh runs, harmless and read-only:

bwrap --unshare-all --unshare-user --die-with-parent \
  --ro-bind /usr /usr --symlink usr/bin /bin --symlink usr/lib /lib \
  --symlink usr/lib64 /lib64 /usr/bin/true && echo "sandbox ok"

Docker mode

docker version --format '{{.Server.Version}}'   # 24+
docker compose version                          # v2.x
docker info >/dev/null && echo "daemon reachable"
id -u; id -g                                    # → SCIENCE_AGENT_UID / _GID

Step 3 — Report gaps, do not close them yourself

Present a short table: check / expected / actual / suggested fix. Suggested fixes are for the user to run, quoted as such:

• Missing Node/pnpm/uv → suggest user-level installs that need no sudo and touch nothing outside $HOME: Node 22 tarball extracted to ~/opt/node22 (add its bin to PATH), corepack enable --install-directory ~/.local/bin && corepack prepare $(node -p "require('./package.json').packageManager") --activate for the pinned pnpm, and the official uv installer script (installs to ~/.local/bin). Missing bubblewrap has no user-level path — it is a distro package the user must install.
• kernel.apparmor_restrict_unprivileged_userns is 1 → the documented fix is sudo sysctl -w kernel.apparmor_restrict_unprivileged_userns=0. Quote it, explain it needs root and is not persistent, and stop.
• Port already in use → offer SCIENCE_AGENT_PORT (host mode) or SCIENCE_AGENT_PUBLISH_PORT (Docker) instead of killing the other process. When moving the runner port, also update the explicit SCIENCE_AGENT_RUNNER_URL in .env — it does not follow *_PORT automatically.
• npm / PyPI unreachable or very slow → set SCIENCE_AGENT_NPM_REGISTRY / SCIENCE_AGENT_PYPI_INDEX in .env (e.g. the Huawei Cloud mirrors; see the variable table in docs/zh/reference/configuration.md). Both are scoped to start-stack.sh's install commands and never touch user or global npm/uv config.

If user namespaces stay restricted, the API and UI still start and /health still reports the runner, but every run_python / run_shell fails. Say this plainly and let the user choose whether to continue.

Step 4a — Deploy: host processes

cp .env.example .env                               # first time only; never overwrite an existing .env
./scripts/start-stack.sh --mode local              # install + build + start
./scripts/start-stack.sh --mode local --no-build   # start only, after a previous build

• Runs in the foreground; it starts the runner (127.0.0.1:4311) in the background and the API (0.0.0.0:4310) in front. Those two are the whole resident stack.
• First run provisions data/envs/gateway and data/envs/paper through uv and needs outbound network.
• ./scripts/run-local.sh [--no-build] is the compatibility wrapper; pnpm start and pnpm server go through it.
• Never launch it with sudo. For unattended operation, hand the user a supervisor option (tmux, or a systemd user unit) — do not install one.

Step 4b — Deploy: Docker Compose

cp .env.docker.example .env      # or merge its keys into an existing .env
# set SCIENCE_AGENT_UID / SCIENCE_AGENT_GID to `id -u` / `id -g` when they are not 1000
mkdir -p data
docker compose build             # first build is long and needs network
docker compose up -d
curl -fsS http://127.0.0.1:4310/health

• ./data is bind-mounted to /app/data and is the only persisted location; it survives docker compose down and rebuilds.
• A uid/gid mismatch is the most common first-run failure: the entry point exits with an explicit "not writable" message. Fix it via SCIENCE_AGENT_UID / SCIENCE_AGENT_GID and recreate the container.
• The service already sets seccomp=unconfined, apparmor=unconfined and systempaths=unconfined for bubblewrap. Do not add capabilities or privileged: true. Dropping systempaths=unconfined still works, but the runner then falls back to binding the container's /proc and warns at startup: sandboxed code sees the container's process list.

Step 5 — Report the URL

• Default: http://127.0.0.1:4310
• Sign in with SCIENCE_AGENT_AUTH_TOKEN. There is no shipped default: when the variable is unset, the stack generates a token on its first start, prints it at startup, and stores it in <data dir>/secrets/auth-token. Read the value from the user's .env or that file — do not print a token into a shared channel.
• Host-process mode binds all interfaces by default, so http://<machine-ip>:4310 also works. Docker publishes on 127.0.0.1 unless SCIENCE_AGENT_PUBLISH_HOST is changed. Auth is one bearer token with no TLS: recommend loopback plus SSH forwarding over exposing the port, and tell the user to change the token first if they do expose it.
• There is no built-in model. A usable session needs a profile plus credential under System configuration → Model registry (docs/zh/reference/runtime-behavior.md → 模型).

Remote host, browser on a laptop

When the stack runs on a remote development machine, forward the port instead of publishing it. Run from the laptop:

remote_user="alice"; remote_host="science-host.example"
ssh -N -L 4310:127.0.0.1:4310 "${remote_user}@${remote_host}"

local_port=4310; remote_port=4310
ssh -f -N -o ServerAliveInterval=30 \
  -L "${local_port}:127.0.0.1:${remote_port}" "${remote_user}@${remote_host}"

Then open http://127.0.0.1:<local-port> locally. <remote-port> is the published port: SCIENCE_AGENT_PORT in host-process mode, SCIENCE_AGENT_PUBLISH_PORT in Docker mode. Pick a different <local-port> if 4310 is taken locally. Stop the tunnel by closing the session, or by killing the backgrounded ssh -f process.

Forward only the API port. The runner (4311) is loopback-only by design.

Management commands

Action	Host processes	Docker Compose
Start	./scripts/start-stack.sh --mode local [--no-build]	docker compose up -d
Stop	Ctrl-C in that terminal (also stops the runner)	docker compose down (./data survives)
Restart	Ctrl-C, then start again	docker compose restart
Rebuild + restart	start once without --no-build	docker compose up -d --build
Logs	stdout/stderr of the foreground terminal (or the supervisor's log)	docker compose logs -f
State	ss -ltn | grep 4310	docker compose ps (includes the health check)
Health	curl -fsS http://127.0.0.1:4310/health	same, against the published host/port

Component health endpoint in both modes: runner http://127.0.0.1:4311/health (reachable from inside the container in Docker mode). The API's own /health echoes the runner status, so it is usually the only one worth checking.

Troubleshooting

Symptom	Cause / next step
data ... is not writable by uid ...	Docker uid/gid mismatch → set SCIENCE_AGENT_UID / _GID, recreate
WARNING: bubblewrap cannot create a sandbox in logs	Host restricts user namespaces → quote the sysctl fix, let the user run it
data/envs/gateway is missing	Started with --no-build before a build → run once without it (that venv holds the interpreter for the bundled Python MCP servers)
API up but every run fails	Usually the sandbox warning above, or no model profile configured
Port already bound	Change SCIENCE_AGENT_PORT / SCIENCE_AGENT_PUBLISH_PORT
does not support --disable-userns warning at runner startup	Expected on bwrap < 0.8 (e.g. Ubuntu 22.04's 0.6): nested-userns hardening is skipped, everything else isolates normally. Upgrade bubblewrap for the stronger profile
supports --disable-userns but cannot use it here warning at runner startup	Expected under LXC and container runtimes that mount /proc/sys read-only, so bubblewrap cannot write user.max_user_namespaces. The option is omitted and executions run; everything else isolates normally. Do not grant privileged or systempaths=unconfined to silence it
First docker compose build fails on network	The build resolves pnpm and both uv environments; retry with network available

Checklist

1. Asked the user which form, and got an answer
2. Ran the read-only checks for that form; reported pass/fail values
3. Reported gaps with suggested user-run commands — no sudo, no global install
4. Deployed only after the user confirmed the environment is acceptable
5. Verified /health, then reported URL + token source
6. Gave SSH forwarding instructions when the stack is not on the user's own machine
7. Gave the management command table for the mode used

Policy: this skill assists; it does not change host configuration on its own. Repository-local writes need a heads-up, host-level changes need the user's explicit go-ahead, and root-level changes are always executed by the user.