Skip to main content

reconsider-rejected-source

Reconsiders a previously rejected source by setting reconsidered_date and re-entering the intake pipeline. Use when an operator believes a prior rejection should be revisited because circumstances have changed.

معلومات المصدر

المستودع
wryenmeek/knowledgebase
آخر نشاط في المصدر
٢٥ أبريل ٢٠٢٦ في ١٣:٠٥
لغة SKILL.md المكتشفة
الإنجليزية
النجوم
١
التفرعات
٠

خيارات التثبيت

يُحدَّد Prompt الذي يراجع المصدر أولًا بشكل افتراضي. يمكنك التبديل إلى أمر مباشر أو تنزيل نسخة محلية.

مراجعة ملفات المصدر

اقرأ SKILL.md وأي ملفات مرافقة يعرضها SkillsMP قبل أن تقرر التثبيت.

عرض SKILL.md

SKILL.md
تعليمات المصدر · معاينة للقراءة فقط
name
reconsider-rejected-source
description
Reconsiders a previously rejected source by setting reconsidered_date and re-entering the intake pipeline. Use when an operator believes a prior rejection should be revisited because circumstances have changed.
# reconsider-rejected-source ## Overview Operator-initiated workflow to reconsider a previously rejected source. The `reconsidered_date` field is set in the existing record's frontmatter; the original rejection record is never modified or deleted. ## Runtime mode Doc-only workflow. No `logic/` directory. The operator follows this procedure manually or via orchestrator guidance. ## When to Use - When a previously rejected source should be re-evaluated due to changed circumstances or new information ## Prerequisites Operator has identified a specific rejection record in `raw/rejected/` and has justification for reconsideration. ## Procedure 1. Locate the rejection record by `sha256` or slug. 2. Verify the source material is still available (in `raw/inbox/` or re-submitted). If the source is unavailable, stop — the operator must re-submit before reconsideration can proceed. 3. Acquire `raw/.rejection-registry.lock`. 4. Set `reconsidered_date: <ISO-8601>` in the rejection record's frontmatter (updating from `null` or from a prior reconsideration timestamp). **Do not modify any other field or body section.** The rejection reason, category, body sections, and all other fields are immutable. 5. Release `raw/.rejection-registry.lock`. 6. Acquire `wiki/.kb_write.lock` and append a reconsideration event to `wiki/log.md` (via `append-log-entry`). Release `wiki/.kb_write.lock`. If log append fails, the `reconsidered_date` update is already persisted; log the failure for operator remediation. 7. If the source is not in `raw/inbox/`, instruct the operator to re-submit it. 8. The source then re-enters the full intake pipeline (`source-intake-steward` → `evidence-verifier` → `policy-arbiter` → downstream). 9. If the source is rejected again (same `sha256`), `log-intake-rejection` will fail closed on the sha256 dedupe check — this is expected behavior. The original rejection record (with `reconsidered_date` set) serves as the complete audit trail. No new record is needed. ## Note The original rejection record is NEVER deleted — this preserves the audit trail. A reconsidered source that passes intake on the second attempt has both a rejection record (with `reconsidered_date` set) and a successful `raw/processed/` artifact. ## Hard-fail conditions - Lock unavailable (`raw/.rejection-registry.lock` or `wiki/.kb_write.lock`). - Source unavailable and operator cannot re-submit. - `wiki/log.md` append failure (reconsidered_date update is already persisted; exit with error for operator remediation, not rollback). ## References - `docs/decisions/ADR-013-rejected-source-registry.md` - `schema/rejection-registry-contract.md` - `.github/skills/log-intake-rejection/SKILL.md`
عرض على GitHub