Skip to main content

reconsider-rejected-source

Reconsiders a previously rejected source by setting reconsidered_date and re-entering the intake pipeline. Use when an operator believes a prior rejection should be revisited because circumstances have changed.

소스 정보

저장소
wryenmeek/knowledgebase
최근 소스 활동
2026년 4월 25일 13:05
감지된 SKILL.md 언어
영어
스타
1
포크
0

설치 방법

기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.

소스 파일 검토

설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.

SKILL.md 표시 중

SKILL.md
소스 지침 · 읽기 전용 미리보기
name
reconsider-rejected-source
description
Reconsiders a previously rejected source by setting reconsidered_date and re-entering the intake pipeline. Use when an operator believes a prior rejection should be revisited because circumstances have changed.
# reconsider-rejected-source ## Overview Operator-initiated workflow to reconsider a previously rejected source. The `reconsidered_date` field is set in the existing record's frontmatter; the original rejection record is never modified or deleted. ## Runtime mode Doc-only workflow. No `logic/` directory. The operator follows this procedure manually or via orchestrator guidance. ## When to Use - When a previously rejected source should be re-evaluated due to changed circumstances or new information ## Prerequisites Operator has identified a specific rejection record in `raw/rejected/` and has justification for reconsideration. ## Procedure 1. Locate the rejection record by `sha256` or slug. 2. Verify the source material is still available (in `raw/inbox/` or re-submitted). If the source is unavailable, stop — the operator must re-submit before reconsideration can proceed. 3. Acquire `raw/.rejection-registry.lock`. 4. Set `reconsidered_date: <ISO-8601>` in the rejection record's frontmatter (updating from `null` or from a prior reconsideration timestamp). **Do not modify any other field or body section.** The rejection reason, category, body sections, and all other fields are immutable. 5. Release `raw/.rejection-registry.lock`. 6. Acquire `wiki/.kb_write.lock` and append a reconsideration event to `wiki/log.md` (via `append-log-entry`). Release `wiki/.kb_write.lock`. If log append fails, the `reconsidered_date` update is already persisted; log the failure for operator remediation. 7. If the source is not in `raw/inbox/`, instruct the operator to re-submit it. 8. The source then re-enters the full intake pipeline (`source-intake-steward` → `evidence-verifier` → `policy-arbiter` → downstream). 9. If the source is rejected again (same `sha256`), `log-intake-rejection` will fail closed on the sha256 dedupe check — this is expected behavior. The original rejection record (with `reconsidered_date` set) serves as the complete audit trail. No new record is needed. ## Note The original rejection record is NEVER deleted — this preserves the audit trail. A reconsidered source that passes intake on the second attempt has both a rejection record (with `reconsidered_date` set) and a successful `raw/processed/` artifact. ## Hard-fail conditions - Lock unavailable (`raw/.rejection-registry.lock` or `wiki/.kb_write.lock`). - Source unavailable and operator cannot re-submit. - `wiki/log.md` append failure (reconsidered_date update is already persisted; exit with error for operator remediation, not rollback). ## References - `docs/decisions/ADR-013-rejected-source-registry.md` - `schema/rejection-registry-contract.md` - `.github/skills/log-intake-rejection/SKILL.md`
GitHub에서 보기