Menu
SkillsMP has collected 10 skills from bahaabdelwahed/embedded-claude-plugin. Open a skill to review its source and details.
Showing 10 of 10 collected skills.
This skill should be used when the user asks to "read application note", "check AN document", "application note guidance", "AN reference design", "ST app note", "AN2606", "AN4013", "AN4031", or needs to extract implementation guidance, configuration examples,…
This skill should be used when the user asks to "identify my MCU", "extract board information", "what chip is this", "read the datasheet", "get MCU specifications", "board features", or needs to extract general device information from STM32 reference manuals,…
This skill should be used when the user asks about "boot mode", "BOOT0 pin", "BOOT1 pin", "boot from flash", "boot from SRAM", "system memory boot", "debug interface", "SWD", "JTAG", "SWO trace", "ST-Link", "J-Link", "OpenOCD", "bootloader", "DFU mode", "UART…
This skill should be used when the user asks about "bus architecture", "AHB APB buses", "bus matrix", "DMA channels", "clock tree", "S-Bus", "I-Bus", "D-Bus", "memory organization", "clock configuration", "PLL setup", "RCC", or needs to understand STM32…
This skill should be used when the user asks about "flash sectors", "flash pages", "SRAM regions", "SRAM layout", "linker script", "memory map", "CCM RAM", "DTCM ITCM", "backup SRAM", "external memory", "FMC", "FSMC", "SDRAM configuration", "memory-mapped…
This skill should be used when the user asks to "configure GPIO", "set up UART", "initialize USART", "configure SPI", "set up I2C", "configure ADC", "set up DAC", "configure timer", "PWM output", "enable DMA", "configure USB", "set up CAN", "configure…
This skill should be used when the user asks about "FreeRTOS on STM32", "RTOS task creation", "task priorities", "stack sizing", "mutex", "semaphore", "queue", "event groups", "task notifications", "ISR safe API", "deferred interrupt processing",…
This skill should be used when the user asks about "flash protection", "readout protection", "RDP levels", "secure boot", "TrustZone", "PCROP", "write protection", "firewall", "option bytes security", "secure firmware update", "SBSFU", or needs to analyze or…
This skill should be used when the user asks to "review STM32 code", "check my firmware", "find bugs in embedded code", "validate peripheral initialization", "audit interrupt configuration", "check DMA setup", "review HAL code", "code quality check", or needs…
Full STM32 development pipeline that chains all 4 agents in sequence. Use this command to run the complete workflow from environment analysis through code review.