メニュー
SkillsMP は bahaabdelwahed/embedded-claude-plugin から 10 件の skill を収集しています。skill を開くとソースと詳細を確認できます。
収集済み skill 10 件中 10 件を表示しています。
This skill should be used when the user asks to "read application note", "check AN document", "application note guidance", "AN reference design", "ST app note", "AN2606", "AN4013", "AN4031", or needs to extract implementation guidance, configuration examples,…
原文の言語: 英語
This skill should be used when the user asks to "identify my MCU", "extract board information", "what chip is this", "read the datasheet", "get MCU specifications", "board features", or needs to extract general device information from STM32 reference manuals,…
原文の言語: 英語
This skill should be used when the user asks about "boot mode", "BOOT0 pin", "BOOT1 pin", "boot from flash", "boot from SRAM", "system memory boot", "debug interface", "SWD", "JTAG", "SWO trace", "ST-Link", "J-Link", "OpenOCD", "bootloader", "DFU mode", "UART…
原文の言語: 英語
This skill should be used when the user asks about "bus architecture", "AHB APB buses", "bus matrix", "DMA channels", "clock tree", "S-Bus", "I-Bus", "D-Bus", "memory organization", "clock configuration", "PLL setup", "RCC", or needs to understand STM32…
原文の言語: 英語
This skill should be used when the user asks about "flash sectors", "flash pages", "SRAM regions", "SRAM layout", "linker script", "memory map", "CCM RAM", "DTCM ITCM", "backup SRAM", "external memory", "FMC", "FSMC", "SDRAM configuration", "memory-mapped…
原文の言語: 英語
This skill should be used when the user asks to "configure GPIO", "set up UART", "initialize USART", "configure SPI", "set up I2C", "configure ADC", "set up DAC", "configure timer", "PWM output", "enable DMA", "configure USB", "set up CAN", "configure…
原文の言語: 英語
This skill should be used when the user asks about "FreeRTOS on STM32", "RTOS task creation", "task priorities", "stack sizing", "mutex", "semaphore", "queue", "event groups", "task notifications", "ISR safe API", "deferred interrupt processing",…
原文の言語: 英語
This skill should be used when the user asks about "flash protection", "readout protection", "RDP levels", "secure boot", "TrustZone", "PCROP", "write protection", "firewall", "option bytes security", "secure firmware update", "SBSFU", or needs to analyze or…
原文の言語: 英語
This skill should be used when the user asks to "review STM32 code", "check my firmware", "find bugs in embedded code", "validate peripheral initialization", "audit interrupt configuration", "check DMA setup", "review HAL code", "code quality check", or needs…
原文の言語: 英語
Full STM32 development pipeline that chains all 4 agents in sequence. Use this command to run the complete workflow from environment analysis through code review.
原文の言語: 英語