swap

name	swap
description	Buy and sell tokens on pump.fun bonding curve and pump swap AMM pool, and query SOL/token balances. Prefer runnable Node scripts in this skill folder; use @pump-fun/pump-sdk and @pump-fun/pump-swap-sdk for custom integrations.
metadata	{"author":"pump-fun","version":"1.0"}

Before Starting Work Critical - Ask these from user

MANDATORY — Do NOT write or modify any code until every item below is answered by the user:

• RPC URL provided or a fallback agreed upon (for any on-chain or tx-building step)
• Signer wallet public key (fee payer / user)
• Framework confirmed (Next.js, Express, CLI scripts only, other)
• Operation type confirmed (buy or sell)
• Coin mint address provided
• Amount confirmed (SOL lamports for buy; token smallest units for sell)
• Front-runner protection desired? If yes, confirm tip amount (default 0.0001 SOL). Transactions will be sent only to Jito block engine endpoints.

You MUST ask the user for ALL unchecked items in your very first response. Do not assume defaults. Do not proceed until the user has explicitly answered each one.

API (preferred) — https://fun-block.pump.fun

Use the API to build swap transactions instead of running scripts directly. The API automatically determines coin state (bonding curve vs AMM) and builds the correct transaction.

POST /agents/swap

Builds a buy or sell transaction. Set inputMint to So11111111111111111111111111111111111111112 (NATIVE_MINT) for buys, or set outputMint to NATIVE_MINT for sells.

Request body:

{
  "inputMint": "So11111111111111111111111111111111111111112",
  "outputMint": "<TOKEN_MINT>",
  "amount": "1000000",
  "user": "<PUBKEY>",
  "slippagePct": 2,
  "feePayer": "<PUBKEY>",
  "frontRunningProtection": false,
  "tipAmount": 0,
  "encoding": "base64"
}

Only inputMint, outputMint, amount, and user are required. All other fields have defaults.

tipAmount is a Jito tip in SOL (e.g. 0.0001 for 100,000 lamports). Only relevant when frontRunningProtection is true.

Encoding: The API defaults to "base58" encoding. Always pass "encoding": "base64" in the request body — scripts already output base64. When sending the signed transaction to an RPC or Jito endpoint, the encoding used to serialize the transaction must match the encoding parameter passed in the send call. Mismatched encodings will cause transaction failures. Always explicitly pass encoding: "base64" in sendTransaction / simulateTransaction RPC calls — never rely on the RPC's default.

• Buy: inputMint = NATIVE_MINT, outputMint = token mint, amount = SOL in lamports
• Sell: inputMint = token mint, outputMint = NATIVE_MINT, amount = token amount (6 decimals)

Response:

{
  "transaction": "<base64-encoded VersionedTransaction>",
  "pumpMintInfo": { "hasGraduated": false, "expectedOutAmount": "123456", "..." : "..." }
}

Deserialize the transaction, have the user wallet sign, and submit to chain.

Runnable examples (Node scripts — only when user explicitly requests)

Use {baseDir} as the path to this skill folder (OpenClaw and Agent Skills clients often expose this placeholder).

cd {baseDir}
npm install
export SOLANA_RPC_URL=https://rpc.solanatracker.io/public

Operation	Script	Example
Fetch coin state (HTTP)	scripts/fetch-coin.mjs	node scripts/fetch-coin.mjs --mint <MINT> --subset
Buy (bonding curve)	scripts/build-buy-bonding-tx.mjs	node scripts/build-buy-bonding-tx.mjs --mint <MINT> --user <PUBKEY> --amount 1000000
Sell (bonding curve)	scripts/build-sell-bonding-tx.mjs	node scripts/build-sell-bonding-tx.mjs --mint <MINT> --user <PUBKEY> --amount 1000000
Buy (AMM)	scripts/build-buy-amm-tx.mjs	node scripts/build-buy-amm-tx.mjs --mint <MINT> --user <PUBKEY> --amount 1000000
Sell (AMM)	scripts/build-sell-amm-tx.mjs	node scripts/build-sell-amm-tx.mjs --mint <MINT> --user <PUBKEY> --amount 1000000
Balances	scripts/print-balances.mjs	node scripts/print-balances.mjs --wallet <PUBKEY> --mint <MINT>

• Run any script with --help for full flags (--slippage, --compute-units, --priority-micro-lamports, --front-runner-protection, --tip-sol, --pool vs --mint for AMM, etc.).
• Tx builders print one JSON object on stdout with transaction (base64-encoded VersionedTransaction). Never pass end-user private keys into these scripts.
• OpenClaw: If YAML metadata ever fails to parse, collapse metadata to a single-line JSON object per OpenClaw skills; optional metadata.openclaw.requires.env: ["SOLANA_RPC_URL"] can gate load-time eligibility.

Safety Rules

• NEVER log, print, or return private keys or secret key material.
• NEVER sign transactions on behalf of a user — scripts build txs; the user (or their wallet) co-signs and sends.
• Always validate that amounts are > 0 before building instructions.
• Use the correct decimal precision: 9 decimals for SOL (1 SOL = 1,000,000,000 lamports), 6 decimals for pump tokens.
• Always check the coin state (bonding curve vs AMM pool) before choosing the right path.
• Always apply slippage protection on buy/sell transactions.
• NEVER trust token_program from the HTTP API (coins-v2). Always fetch the mint account on-chain via connection.getAccountInfo(mint) and use .owner to determine the correct token program (SPL Token or Token-2022).
• Verify imports: use @pump-fun/pump-sdk / @pump-fun/pump-swap-sdk (not internal monorepo paths). In TypeScript apps, BN from bn.js matches what the SDKs expect (Anchor BN is the same type in practice).

Program IDs

Program	ID
Pump	6EF8rrecthR5Dkzon8Nwu78hRvfCKubJ14M5uBEwF6P
Pump AMM	pAMMBay6oceH9fJKBRHGP5D4bD4sWpmSwMn52FMfXEA

Environment Variables

SOLANA_RPC_URL=https://rpc.solanatracker.io/public
NEXT_PUBLIC_SOLANA_RPC_URL=https://rpc.solanatracker.io/public

The default public mainnet RPC (https://api.mainnet-beta.solana.com) often cannot send transactions. Confirm an HTTPS RPC with the user. Examples: Solana Tracker public RPC, Ankr https://rpc.ankr.com/solana.

Install

Inside this skill folder (includes scripts):

cd {baseDir}
npm install

Inside another app (from scratch):

npm install @pump-fun/pump-sdk @pump-fun/pump-swap-sdk @solana/web3.js@^1.98.0 @solana/spl-token bn.js

Check npm info @pump-fun/pump-sdk dependencies and align @solana/web3.js / @solana/spl-token versions to avoid duplicate incompatible copies.

SDK setup (minimal)

import { PUMP_SDK, OnlinePumpSdk } from "@pump-fun/pump-sdk";
import { PUMP_AMM_SDK, OnlinePumpAmmSdk } from "@pump-fun/pump-swap-sdk";
import { Connection } from "@solana/web3.js";

const connection = new Connection(process.env.SOLANA_RPC_URL!);
const onlinePump = new OnlinePumpSdk(connection);
const onlineAmm = new OnlinePumpAmmSdk(connection);

Full transaction building (compute budget, blockhash, partial sign) is implemented in scripts/lib/tx-build.mjs and scripts/lib/compute.mjs.

Determining coin state

Use node scripts/fetch-coin.mjs --mint <MINT> --subset or GET:

https://frontend-api-v3.pump.fun/coins-v2/{mint}

CORS-protected: frontend-api-v3.pump.fun does not allow browser-origin requests. When building a web application, always call this endpoint from your backend/server and proxy the result to the frontend. Do not call it directly from client-side JavaScript.

if (!coin.complete) → bonding curve → PUMP_SDK buy/sell
else if (coin.pump_swap_pool) → AMM → PUMP_AMM_SDK (pool = pump_swap_pool)
else → migrating / wait and retry

Buy tokens (bonding curve)

Default: POST /agents/swap with inputMint = NATIVE_MINT (see API section above) Script (only when user explicitly requests): scripts/build-buy-bonding-tx.mjs
Requires complete === false. Uses OnlinePumpSdk, bondingCurvePda, getBuyTokenAmountFromSolAmount, getBuySolAmountFromTokenAmount, PUMP_SDK.buyInstructions. tokenProgram is the mint account's owner from RPC (getAccountInfo(mint).owner — SPL Token or Token-2022).

The buy script performs a two-step quote matching the frontend blockchainStore.getSwapTx:

1. getBuyTokenAmountFromSolAmount(solInput) — expected token amount
2. getBuySolAmountFromTokenAmount(tokenAmount) — precise SOL cost (accounts for rounding)

Parameters (buyInstructions)

Parameter	Type	Description
global	Global	Global state
bondingCurveAccountInfo	AccountInfo<Buffer>	Raw account
bondingCurve	BondingCurve	Decoded
associatedUserAccountInfo	AccountInfo<Buffer> | null	User ATA
mint / user	PublicKey
amount	BN	Token out (6 dp)
solAmount	BN	SOL in (lamports)
slippage	number	Percent (below)
tokenProgram	PublicKey	e.g. Token-2022

Sell tokens (bonding curve)

Default: POST /agents/swap with outputMint = NATIVE_MINT (see API section above) Script (only when user explicitly requests): scripts/build-sell-bonding-tx.mjs
Uses getSellSolAmountFromTokenAmount and PUMP_SDK.sellInstructions. Same RPC-derived tokenProgram as the buy script.

Parameters (sellInstructions)

Parameter	Type	Description
global	Global	Global state
bondingCurveAccountInfo	AccountInfo<Buffer>	Raw account
bondingCurve	BondingCurve	Decoded
mint / user	PublicKey
amount	BN	Token to sell (6 dp)
solAmount	BN	Expected SOL out (lamports)
slippage	number	Percent (below)
tokenProgram	PublicKey	e.g. Token-2022
mayhemMode	boolean	Derived from bondingCurve.isMayhemMode
cashback	boolean	Derived from bondingCurve.isCashbackCoin

The sell script reads mayhemMode and cashback from the decoded on-chain bonding curve account automatically, matching the frontend blockchainStore.getSwapTx behavior. No flags needed.

Buy / sell (AMM, post-graduation)

Default: POST /agents/swap — the API automatically detects graduated coins and builds AMM transactions. Script (only when user explicitly requests): scripts/build-buy-amm-tx.mjs, scripts/build-sell-amm-tx.mjs
Uses OnlinePumpAmmSdk.swapSolanaState(pool, user) and:

• Buy: PUMP_AMM_SDK.buyQuoteInput (SOL in) or PUMP_AMM_SDK.buyBaseInput (token out)
• Sell: PUMP_AMM_SDK.sellBaseInput (token in) or PUMP_AMM_SDK.sellQuoteInput (SOL out target)

Slippage

The pump bonding SDK takes slippage as a percentage number (e.g. 10 = 10%), not basis points. Same convention is used in the frontend getSwapTx path. The SDK applies it internally (e.g. max SOL cost scales with floor(slippage * 10) / 1000).

Compute units and priority fees

Defaults match the pump.fun app constants (see scripts/lib/constants.mjs in this skill):

Operation	Default compute units
Bonding buy/sell	120_000 each
AMM buy/sell	200_000

Scripts accept --compute-units to override.

Priority fee: If --priority-micro-lamports is omitted, scripts call Solana JSON-RPC getPriorityFeeEstimate on a draft serialized transaction (with a 100k microlamport floor and an upper cap — see scripts/lib/compute.mjs). Many RPCs support this; if not, the floor is used.

Transaction assembly and send

After the user wallet signs, choose the send path based on whether frontRunnerProtection is true in the script output JSON.

Default (no front-runner protection)

const signature = await connection.sendRawTransaction(
  signedTransaction.serialize(),
  { skipPreflight: false, preflightCommitment: "confirmed" },
);
const latestBlockhash = await connection.getLatestBlockhash("confirmed");
await connection.confirmTransaction(
  { signature, ...latestBlockhash },
  "confirmed",
);

With front-runner protection (Jito only)

When the transaction was built with --front-runner-protection, it already contains a Jito tip instruction. Send it only to Jito block engine endpoints — do not send via connection.sendRawTransaction or any other RPC, as that would leak the transaction to the public mempool and defeat the protection.

import { sendTransactionToJito } from "./lib/jito.mjs";

const txBase64 = Buffer.from(signedTransaction.serialize()).toString("base64");
const result = await sendTransactionToJito(txBase64);

Or manually via fetch (no dependency on the lib):

const JITO_ENDPOINTS = [
  "https://mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://amsterdam.mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://frankfurt.mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://ny.mainnet.block-engine.jito.wtf/api/v1/transactions",
  "https://tokyo.mainnet.block-engine.jito.wtf/api/v1/transactions",
];

const txBase64 = Buffer.from(signedTransaction.serialize()).toString("base64");
const body = JSON.stringify({
  jsonrpc: "2.0", id: 1, method: "sendTransaction",
  params: [txBase64, { encoding: "base64" }],
});

await Promise.any(
  JITO_ENDPOINTS.map((url) =>
    fetch(url, {
      method: "POST",
      headers: { "Content-Type": "application/json" },
      body,
    }).then((r) => r.json()),
  ),
);

Then confirm as usual with connection.confirmTransaction.

Get balances

Script: scripts/print-balances.mjs (RPC + optional --use-profile-api).

SOL / token (on-chain)

Use connection.getBalance for lamports; getAssociatedTokenAddressSync + getAccount for the ATA (6 decimals for pump tokens).

Pump.fun HTTP APIs

GET https://profile-api.pump.fun/balance/summary/{wallet}

{
  "success": true,
  "data": {
    "native_balance": 1.5,
    "native_lamports": 1500000000,
    "sol_price": 145.23,
    "total_value": 217.85
  }
}

GET https://profile-api.pump.fun/balance/tokens/{wallet}?page=1&size=50

{
  "success": true,
  "data": {
    "tokens": [
      {
        "token_mint": "ABcDeFgHiJkLmNoPqRsTuVwXyZ123456789abcdefg",
        "token_name": "MyToken",
        "token_symbol": "MTK",
        "token_image": "https://ipfs.io/ipfs/Qm...",
        "token_price": 0.00123,
        "balance": 5000000,
        "value": 6.15,
        "usd_market_cap": 50000
      }
    ]
  },
  "pagination": { "page": 1, "size":      

GET https://frontend-api-v3.pump.fun/sol-price

CORS-protected — call from backend only (see note in "Determining coin state" above).

{ "solPrice": 145.23 }

Get coin data (HTTP)

GET https://frontend-api-v3.pump.fun/coins-v2/{mint}

CORS-protected — call from backend only (see note in "Determining coin state" above).

{
  "mint": "ABcDeFgHiJkLmNoPqRsTuVwXyZ123456789abcdefg",
  "name": "MyToken",
  "symbol": "MTK",
  "description": "A sample token on pump.fun",
  "image_uri": "https://ipfs.io/ipfs/Qm...",
  "metadata_uri": "https://ipfs.io/ipfs/Qm...",
  "creator": "CreatorWalletAddress...",
  "created_timestamp": 1700000000,
  "complete": false,
  "bonding_curve": "BondingCurveAddress...",
  "associated_bonding_curve": "AssociatedBondingCurveAddress...",
  "pump_swap_pool": null,
  "token_program": "TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb",
   
   
   
   
   
   
   
   
   

Field	Notes
complete	true when graduated off bonding curve
pump_swap_pool	AMM pool address when on pump swap
bonding_curve	Bonding curve PDA address
token_program	Do NOT trust this value — always verify on-chain (see below)

NEVER trust token_program from the HTTP API. The coins-v2 endpoint may return a stale or incorrect token_program. Always resolve it on-chain by fetching the mint account and reading its owner:

const mintAccountInfo = await connection.getAccountInfo(mintPublicKey);
const tokenProgram = mintAccountInfo.owner; // TOKEN_PROGRAM_ID or TOKEN_2022_PROGRAM_ID

The skill scripts already do this via tokenProgramIdFromMint() in scripts/lib/coin-resolve.mjs. Any custom integration must do the same.

Quote helpers (bonding curve)

Pure functions from @pump-fun/pump-sdk (see script source for usage):

• getBuyTokenAmountFromSolAmount
• getBuySolAmountFromTokenAmount
• getSellSolAmountFromTokenAmount

All need global, feeConfig (fetchFeeConfig()), mintSupply, and bondingCurve.

Error handling and troubleshooting

• complete === true but pump_swap_pool is null — migration window; retry later; do not use bonding instructions.
• Bonding curve account missing — wrong mint, wrong network, or uninitialized coin.
• Coin has graduated / AMM script errors on bonding-only coin — re-fetch coins-v2 and switch script path.
• Insufficient SOL — user cannot pay buy amount or fees; check nativeLamports before building.
• Slippage / simulation failures — increase slippage cautiously, check pool reserves, retry with fresh blockhash (re-run script).
• ATA missing — first buy may create ATA inside the same tx; if a custom flow fails, ensure ATA creation is included or pre-created.
• RPC errors — rate limits, missing getPriorityFeeEstimate, or send blocked; try another RPC; pass --priority-micro-lamports explicitly.

End-to-end flow

1. Confirm operation (buy or sell), mint address, and signer wallet; set SOLANA_RPC_URL. Ask if front-runner protection is desired.
2. Use POST /agents/swap — the API automatically determines coin state and builds the correct transaction. Only use scripts if the user explicitly requests them: fetch-coin (or HTTP) → check coin state (see decision tree) → choose bonding or AMM script → run the appropriate build-* script; capture transaction. Add --front-runner-protection (and optionally --tip-sol) if the user wants Jito-only submission.
3. Deserialize with @solana/web3.js VersionedTransaction.deserialize, have user sign.
4. Send the transaction: If frontRunnerProtection is true in the script output JSON, send only to Jito endpoints (see "Transaction assembly and send" above). Otherwise use sendRawTransaction + confirmTransaction.