Apply Darwin Legal formatting conventions when drafting or generating any contract, agreement, amendment, or legal document as a Word (.docx) file. Use this skill whenever Ryan asks to draft, generate, or format any agreement — including RSPAs, consulting agreements, amendments, board consents, side letters, or any other legal document — even if the request doesn't explicitly mention formatting. Also use when asked to reformat or clean up an existing contract. Always read this skill before producing any .docx legal document.
Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.
A direct command skips the review prompt. Inspect the source before running it.
Apply Darwin Legal formatting conventions when drafting or generating any contract, agreement, amendment, or legal document as a Word (.docx) file. Use this skill whenever Ryan asks to draft, generate, or format any agreement — including RSPAs, consulting agreements, amendments, board consents, side letters, or any other legal document — even if the request doesn't explicitly mention formatting. Also use when asked to reformat or clean up an existing contract. Always read this skill before producing any .docx legal document.
This skill governs how all Darwin Legal contracts and legal documents are formatted in Word. Apply these rules to every document generated as a .docx, regardless of agreement type.
Also read the docx SKILL.md at /mnt/skills/public/docx/SKILL.md for general Word document mechanics. This skill governs Darwin Legal-specific content and style choices.
The base template lives at: assets/Darwin_Legal_Base_Template.dotx
Document Generation Workflow
Always start from the template. Do not create a blank document. The template contains the Darwin Legal Numbering style, Normal style with correct font/spacing, and all numbering definitions.
# Step 1: Copy template as working docxcp assets/Darwin_Legal_Base_Template.dotx /tmp/output.docx
# Step 2: Unpack
python scripts/office/unpack.py /tmp/output.docx /tmp/unpacked/
# Step 3: Edit word/document.xml — replace body content, preserve structure# Step 4: Pack
python scripts/office/pack.py /tmp/unpacked/ /tmp/output.docx --original /tmp/output.docx
# Step 5: ALWAYS run post-processing fix (see below) before saving to workspace
Clear the existing body content in document.xml (the template contains test paragraphs) and replace with the contract content. Preserve the <w:body> wrapper and <w:sectPr> (section properties) at the end.
CRITICAL: Post-Processing Fix (Required After Every pack.py Run)
The .dotx base template causes two bugs that make Word refuse to open the output file. Both must be patched after pack.py runs, every time, without exception.
Bug 1 — Wrong content type. The template registers word/document.xml as wordprocessingml.template.main+xml in [Content_Types].xml. A .docx must use wordprocessingml.document.main+xml. pack.py preserves the template type and Word rejects the file.
Bug 2 — Missing standalone="yes". pack.py strips the standalone="yes" attribute from the XML declaration in word/document.xml. Some versions of Word reject files missing this attribute.
A reusable fix function lives at /sessions/funny-ecstatic-ride/mnt/.claude/fix_docx.py. Call it immediately after pack.py, before saving anywhere:
import sys
sys.path.insert(0, '/sessions/funny-ecstatic-ride/mnt/.claude')
from fix_docx import fix_docx
fix_docx('/tmp/output.docx', '/sessions/funny-ecstatic-ride/mnt/Drafts and Comments/FINAL_NAME.docx')
Do not save the raw pack.py output to the workspace — always run fix_docx first.
CRITICAL: Preserve <w:document> Opening Tag Verbatim
Never reconstruct the <w:document> opening tag from scratch. The tag declares many optional namespace prefixes (cx1–cx8, w16sdtdh, w16sdtfl, w16du, wp14, etc.) that must match the mc:Ignorable attribute exactly. If any declared prefix is missing or mismatched, Word rejects the file.
Always extract the header from the template itself:
import zipfile, re
with zipfile.ZipFile('/tmp/output.docx') as z:
orig = z.read('word/document.xml').decode()
m = re.match(r'(.*?<w:body>)', orig, re.DOTALL)
header = m.group(1) # use this verbatim as the opening of document.xml
Then build the new document.xml as header + body_content + sectPr + '</w:body></w:document>'.
w:pPr Element Ordering
OOXML schema requires this order inside <w:pPr> for numbered paragraphs:
Order must be: pStyle → numPr → spacing → contextualSpacing → jc. Any other order causes a schema validation error and may prevent the file from opening.
Font and Page Setup
These are already baked into the template's Normal style. Do not override them in paragraph-level XML unless correcting a specific paragraph.
Page numbers: plain Arabic numerals, centered footer, no decoration
Document Title and Date
Title: centered, all caps — use a plain Normal paragraph with <w:jc w:val="center"/> and a bold run
Effective date appears in the first sentence of the body, not in the signature block
Opening pattern: This [Agreement Name] (this "Agreement") is made as of [Date] by and between...
Numbering — Darwin Legal Numbering Style
The template defines a four-level multilevel list style. Reference it by setting numId="3" and the appropriate ilvl in each paragraph's <w:pPr>.
Level Reference Table
Level
Format
ilvl
Example
First
1.2.3.
0
1. Services.
Second
a.b.c.
1
a. Scope.
Third
i.ii.iii.
2
i. Deliverables.
Fourth
A.B.C.
3
A. Engineering.
Paragraph XML Pattern
<w:p><w:pPr><w:numPr><w:ilvlw:val="0"/><w:numIdw:val="3"/></w:numPr><w:jcw:val="both"/></w:pPr><w:r><w:txml:space="preserve">Services. The Consultant agrees to perform...</w:t></w:r></w:p>
For level 1, set <w:ilvl w:val="1"/>. For level 2, <w:ilvl w:val="2"/>. For level 3, <w:ilvl w:val="3"/>. The numId stays 3 at all levels.
Section Heading Style
The heading text runs inline with the body paragraph — there is no separate heading line. The section label (e.g., Services.) is plain text followed by two spaces and then the body text, all in the same paragraph.
Do not apply bold, underline, or italics to heading text.
Cross-References (Bookmarks + REF Fields)
Use Word bookmarks and REF fields for all cross-references so they auto-update on F9 after structural edits in Word.
Bookmark Naming Convention
Generate bookmark names from the section identifier, lowercased, with underscores:
Section
Bookmark Name
Section 1
sec_1
Section 2(a)
sec_2_a
Section 2(a)(i)
sec_2_a_i
Section 3(b)(ii)(A)
sec_3_b_ii_A
Step 1: Place Bookmark on Target Paragraph
Add bookmark start/end wrapping the section label text in the target paragraph:
<w:p><w:pPr><w:numPr><w:ilvlw:val="0"/><w:numIdw:val="3"/></w:numPr><w:jcw:val="both"/></w:pPr><w:bookmarkStartw:id="1"w:name="sec_2_a"/><w:r><w:txml:space="preserve">Scope. The services to be performed...</w:t></w:r><w:bookmarkEndw:id="1"/></w:p>
Bookmark IDs must be unique integers across the document. Start at 1 and increment.
Step 2: Insert REF Field at Cross-Reference Site
Replace plain cross-reference text (e.g., "Section 2(a)") with a REF field:
<w:r><w:txml:space="preserve">as set forth in </w:t></w:r><w:r><w:fldCharw:fldCharType="begin"/></w:r><w:r><w:instrTextxml:space="preserve"> REF sec_2_a \n \h </w:instrText></w:r><w:r><w:fldCharw:fldCharType="separate"/></w:r><w:r><w:t>Section 2(a)</w:t></w:r><w:r><w:fldCharw:fldCharType="end"/></w:r>
The text inside the separate/end block is the display value before Word recalculates. Set it to the correct current section reference — Word will update it on F9 or document open.
The \n flag tells Word to display the paragraph number (the section label). The \h flag makes it a hyperlink.
Field Update Note
Fields render correctly on first open in Word, which triggers automatic field recalculation. If a field shows the old number, Ctrl+A → F9 forces a full update.
Defined Terms
Quotes only on first definition — no bold, underline, or italics
Example: ...the shares purchased hereunder (the "Shares")...
Subsequent uses: capitalize, no quotes
Definitions Section
Include a standalone "Definitions" section only for documents approximately 5,000 words or longer
In shorter documents, define terms inline on first use
If used, Definitions is typically Section 1; terms listed alphabetically as (a), (b), (c) sub-items
Lists
Never use bullets
List-like content uses the next numbering tier: (i), (ii), (iii) or (A), (B), (C)
List item punctuation: semicolons on all items except second-to-last ("; and" or "; or") and last (period)
All-Caps Provisions
Use all caps (no additional formatting) for:
Limitation of liability clauses
Disclaimer of warranties
Indemnification caps
Section 83(b) notices
Securities legend text
Any provision where all-caps treatment is standard for enforceability or notice
Recitals
Case-by-case. Appropriate for commercial agreements; typically omitted from equity documents.
If used:
Centered plain-text "RECITALS" heading
WHEREAS clauses are unnumbered paragraphs beginning with "WHEREAS,"
Close with a "NOW, THEREFORE" paragraph
Signature Block
[PARTY NAME IN ALL CAPS]
[Entity name, if signing on behalf of entity]
By: _______________________________
Name:
Title:
