gum-tool-variable-references

name	gum-tool-variable-references
description	Gum variable references — Excel-like cross-instance/cross-element binding via Roslyn-parsed assignments. Triggers: VariableReferenceLogic, EvaluatedSyntax, ApplyVariableReferences, VariableChangedThroughReference, VariableReferences VariableListSave.

Variable References

Variable references are Gum's system for keeping variables in sync across instances and elements, like cell references in a spreadsheet. A user writes X = SomeOtherObject.X and the left side stays updated whenever the right side changes.

Storage

Variable references are stored as a VariableListSave<string> on a StateSave, with Name set to "VariableReferences" (or "InstanceName.VariableReferences" for instance-scoped references). Each string entry is one assignment line.

Syntax

LeftProperty = RightSide

• Left side: An unqualified property name on the owning instance/element (e.g. X, FontSize, Red).
• Right side: A variable path, which can be:
  • Local: OtherInstance.X (same element)
  • Cross-element: Components/MyComp.InstanceName.Width (slash-separated element path)
  • Expressions: OtherInstance.Width + 10, OtherInstance.Width * 2, !OtherInstance.Visible
  • Conditional/comparison/logical operators: ternary cond ? a : b, ==, !=, <, >, <=, >=, &&, ||, !
  • Category-state LHS: <CategoryName>State = "StateName" assigns the categorical state by name
  • Literals: X = 42
• Comments: Lines starting with // are skipped. Invalid lines are auto-commented on validation failure.
• Shorthand: Writing just OtherInstance.X (no left side) auto-expands to X = OtherInstance.X.
• Color expansion: Color = OtherInstance.Color auto-expands to separate Red, Green, Blue assignments.

Roslyn Parsing

The syntax is parsed as C# via Roslyn. Slashes in element paths are converted to global:: qualified names before parsing (Components/Foo becomes global::Components.Foo) and converted back after. The EvaluatedSyntax class handles conversion (ConvertToCSharpSyntax / ConvertToSlashSyntax) and recursive evaluation of the right-side expression tree.

Architecture

SetVariableLogic (variable change entry point)
  ├─ calls VariableReferenceLogic.DoVariableReferenceReaction()
  │    ├─ Validates lines (GetIndividualFailures)
  │    ├─ ElementSaveExtensions.ApplyVariableReferences() — writes hard values to StateSave
  │    ├─ Finds all elements that reference this element (via ObjectFinder.GetElementReferencesToThis)
  │    ├─ Applies references on those elements too (cascade)
  │    └─ DoVariableReferenceReactionOnInstanceVariableSet() — deep propagation for tunneled vars
  └─ calls VariableReferenceLogic.ReactIfChangedMemberIsVariableReference()
       └─ ModifyLines() — auto-expansion and qualification of newly entered references

Key Classes

Class	Location	Role
VariableReferenceLogic	Tools/Gum.Presentation/Plugins/InternalPlugins/VariableGrid/	Tool-side orchestration: validation, reaction to changes, line expansion
EvaluatedSyntax	Runtimes/GumExpressions/	Roslyn-based expression parser/evaluator (shared Gum.Expressions package); resolves right-side values via RecursiveVariableFinder, or via a live GraphicalUiElement for Absolute* identifiers (see below)
ElementSaveExtensions (partial)	GumRuntime/ElementSaveExtensions.GumRuntime.cs	ApplyVariableReferences — two overloads: one for ElementSave (save-class, tool-time), one for GraphicalUiElement (runtime)
MainVariableGridPlugin	Tools/Gum.Presentation/Plugins/InternalPlugins/VariableGrid/	Calls GumExpressionService.Initialize() so the tool uses Roslyn evaluation

Two Apply Paths

ApplyVariableReferences has two overloads:

1. ElementSave overload (tool-time): Iterates VariableListSave entries, evaluates right sides, writes hard values into the StateSave via SetValue. Fires VariableChangedThroughReference delegate when a value actually changes, which routes through PluginManager.Self.VariableSet — this triggers downstream reactions (font generation, etc.).

2. GraphicalUiElement overload (runtime): Similar iteration but calls referenceOwner.SetProperty(left, value) on the runtime object. Used for wireframe preview in the tool and at game runtime.

Right-Side Evaluation

GetRightSideValue resolves the right side of an assignment:

• In the tool: CustomEvaluateExpression is set by MainVariableGridPlugin to use EvaluatedSyntax (Roslyn parsing with full expression support).
• At runtime (no tool): Falls back to RecursiveVariableFinder with simple dot-path lookup — no expression support, just direct variable resolution.

Resolving Absolute* Identifiers (AbsoluteX/Y/Left/Top/Right/Bottom/Width/Height)

These exist only as computed properties on an already-laid-out GraphicalUiElement — never as authored StateSave data — so RecursiveVariableFinder can never resolve them. EvaluatedSyntax takes an optional liveRoot (a GraphicalUiElement) threaded all the way from the top of the apply chain; when the right side's final identifier is one of these names, it resolves against liveRoot.GetGraphicalUiElementByName(...) instead of falling through to state lookup. liveRoot is scoped to one element (mirrors how instance names are scoped), so a cross-element (Components/Foo...) reference never attempts this resolution.

Both apply paths supply liveRoot when a live tree is available: the tool passes IWireframeObjectManager.GetRepresentation(parentElement) (null when nothing is currently rendered for that element); the runtime passes the top-level GraphicalUiElement already being applied against. Validation (AddFailureForLine) needs the same liveRoot as the apply call, or a valid Absolute* reference gets auto-commented out before it's ever applied.

global::Localization.CurrentLanguage

Reserved identifier resolving the current language index — see the gum-runtime-variable-references skill for the resolution mechanism. Tool preview works because every property change already triggers a full wireframe rebuild (WireframeObjectManager.RefreshAll(forceLayout: true, ...)), which re-applies variable references; MainEditorTabPlugin.StartUp() wires CustomSetPropertyOnRenderable.LocalizationService to the DI ILocalizationService singleton so that re-apply sees the tool's actual current language.

Left-Side Type Coercion

Before the evaluated right side is written, it is coerced to the left variable's declared type via EvaluatedSyntax.CastTo(desiredType) (desiredType resolved from the existing state variable, else ObjectFinder.GetRootVariable). CastTo handles numeric widening/narrowing, ToString for string targets, and enum targets — a string (e.g. a ternary result "LeftToRightStack") is parsed via Enum.Parse, an int via Enum.ToObject. The boxed enum is required: typed consumers like GraphicalUiElement's ChildrenLayout setter and int-on-disk serialization reject a raw string. The enum CLR type is resolved by a cached reflection scan (EvaluatedSyntax.ResolveEnumType), overridable via the static EvaluatedSyntax.TypeResolver.

CastTo is the single coercion point shared by three callers: state-level apply (GetRightSideValue/GumExpressionService), grid validation (VariableReferenceLogic.AddFailureForLine, so a valid enum reference is not auto-commented), and the behavior tool-only applier (BehaviorToolOnlyReferencesApplier). The behavior applier evaluates the RHS directly rather than via GetRightSideValue, so it resolves the left type and calls CastTo itself — without that an enum-typed behavior reference would store a raw string.

Author-Time Materialization Is The Model

When the tool resolves a VariableReferences row — interactive edit, Make Default, the handful of ElementCommands paths — ApplyVariableReferences writes the evaluated right-hand-side as a hard scalar into the same StateSave's Variables. The references row and the materialized scalar are both persisted to disk. Lookup never re-evaluates the reference: scalar resolution finds the materialized value directly.

This is the load-bearing fact for reasoning about VariableReferences. A few consequences fall out of it:

• Files written by paths that bypass ApplyVariableReferences are inconsistent. AI-authored XML, hand edits, programmatic creation, and "delete the scalars to force a reapply" workflows all leave a state with a VariableReferences row but no materialized scalars. The Variables tab / scalar lookup then falls through to the default state instead of the reference's resolved value. Gum currently has no load-time repair for this; the only fix is to retrigger a path that runs ApplyVariableReferences (e.g. re-edit and re-save the reference).
• References are snapshots, not live bindings. Once materialized, the scalar is what every reader sees. If the right-hand side changes elsewhere, the snapshot stays stale until propagation runs again. The cascade in DoVariableReferenceReaction (described above) is what keeps snapshots fresh when authoring; nothing keeps them fresh on its own.
• Precedence is decided at author time, not at lookup time. The materialized scalar lives in state.Variables like any other authored value, so the normal "most specific wins" scalar walk decides who wins between a state-reference and a more-local explicit override. There is no separate evaluation pass that re-asserts the reference.
• Inheritance interacts naturally. Materialization happens on the element that authors the reference. Derived components and instances find the materialized scalar via the existing recursive state walk; they do not need their own copy. (The walk going up the instance type's BaseType chain was previously broken in StateSaveExtensionMethods.cs — see fix history on fix/variable-references-inheritance-display.)

When designing fixes in this area, the question is almost always "did ApplyVariableReferences run on the state that owns the reference?" — not "should the lookup do something smarter when it walks past a VariableReferences row?"

Hard Values — Runtime Implications

Variable references write hard values into the StateSave. This means at game runtime (where ApplyVariableReferences on the GraphicalUiElement runs once at load time), the referenced values are already baked into the save data. References are not dynamically re-evaluated at game runtime when the source value changes — they are a tool-time binding mechanism. The runtime ApplyVariableReferences(GraphicalUiElement) overload exists primarily for the tool's wireframe preview.

Cross-Element References and Cascading

When a variable changes, DoVariableReferenceReaction finds all elements that reference the changed element via ObjectFinder.GetElementReferencesToThis (filtered to ReferenceType.VariableReference). It then applies variable references on those elements too, creating a cascade. Modified elements are auto-saved.

Deep Propagation

DoVariableReferenceReactionOnInstanceVariableSet handles a subtler case: when an instance's base element has variable references internally, and the changed variable tunnels through. It walks the reference graph to find which inner-instance variables need updating and writes the values directly into the container's state.

Validation

GetIndividualFailures checks each line for:

• Parseable assignment syntax
• Forbidden left-side names (Name, BaseType, DefaultChildContainer)
• Left-side variable existence
• Right-side evaluability
• Type compatibility (with casting support for numeric types)
• Root variable matching for unit/alignment types (prevents mixing XUnits with YUnits, etc.)

Invalid lines are auto-commented with // prefix and a message is shown to the user.

Behavior-Sourced Tool-Only References

A separate variable-reference flavor lives on BehaviorSave.ToolOnlyVariableReferences (a List<string>, not a VariableListSave). Used by Forms property promotion (#2637 v2): a behavior declares e.g. ButtonCategoryState = IsEnabled ? "Enabled" : "Disabled" so the design-time wireframe reflects authored FormsProperty values. Strictly tool-only — applied by BehaviorToolOnlyReferencesApplier invoked from VariableReferenceLogic.DoVariableReferenceReaction immediately after the state-level apply. The runtime never traverses this list; the wrapped Forms control's setter (e.g. FrameworkElement.IsEnabled → UpdateState()) owns the visual at runtime, so applying the reference there would double-write. See gum-forms-behaviors for the property-promotion pipeline.

The applier passes a fallback resolver into EvaluatedSyntax.FromSyntaxNode so identifiers not authored on state fall back to the behavior's FormsProperty.Value declarations (mirrors WPF DependencyProperty default values). Plumbed through RecursiveVariableFinder.Fallback — any caller that needs the same "default-when-state-empty" shape can use it.

Evaluating "defaults-only" (footgun): To ask "what would this resolve to with nothing authored?", do not pass an empty StateSave to FromSyntaxNode — RecursiveVariableFinder resolves by name through ParentContainer, so an empty state owned by a real element still leaks that element's authored values (routes to its DefaultState). Call EvaluatedSyntax.FromSyntaxNodeUsingDefaultsOnly(node, fallback) instead; it owns the state with a throwaway empty element so every identifier falls through to the fallback. The applier uses this for the "skip if equal to resting wireframe" check (issue #3082).

Known Gaps

• Font generation: CollectRequiredFonts (in HeadlessFontGenerationService) and RecursiveVariableFinder do not resolve variable references. If a font property (Font, FontSize, etc.) is set via a variable reference, the font file may not be generated for that value. The tool-time path works because VariableChangedThroughReference fires PluginManager.VariableSet, but headless/CLI font generation could miss these. (See issue #2414)
• Runtime support: The Roslyn expression evaluator has been extracted into Runtimes/GumExpressions/ (Gum.Expressions NuGet). Games can opt in to expression support and use ApplyAllVariableReferences to propagate changes at runtime. See the gum-runtime-variable-references skill for details.