| name | scienceworld-heating-apparatus-setup |
| description | This skill positions a container with a substance onto a heating device (stove, oven) and activates the device. It should be triggered when a task requires melting, boiling, or heating a substance. The skill moves the prepared container to the heating element and turns it on. |
Instructions
Purpose
This skill automates the setup of a heating apparatus for scientific experiments involving melting, boiling, or heating a substance. It handles the positioning of a prepared container onto a heating element and the activation of the device.
Prerequisites
- Target Substance: The substance to be heated (e.g., chocolate, water) must be located and identified.
- Suitable Container: A compatible, heat-safe container (e.g., metal pot, beaker) must be available in the environment.
- Heating Device: A functional heating device (e.g., stove, oven) must be present and accessible.
- Location: The agent should be in the same room as the required items (kitchen, workshop, etc.).
Core Procedure
Follow this sequence to execute the skill. Use the bundled setup_heater.py script for reliable, error-prone steps (1-4).
-
Prepare the Substance: Ensure the target substance is placed into the chosen container.
- High Freedom Decision: Select the most appropriate container based on the substance and heating method.
- Action Pattern:
move <SUBSTANCE> to <CONTAINER>
-
Position the Container: Move the prepared container onto the heating device.
- Action Pattern:
move <CONTAINER> to <HEATING_DEVICE>
-
Activate the Heater: Turn on the heating device to begin the thermal process.
- Action Pattern:
activate <HEATING_DEVICE>
-
Verify Setup: Confirm the container is correctly positioned and the device is active.
- Action Pattern:
look at <HEATING_DEVICE>
- Expected Observation: The device is "turned on" and the container is listed as being on it.
Post-Setup & Monitoring
After the heating apparatus is active, proceed with the main experiment (e.g., temperature measurement). Use the bundled monitor_temperature.py script for consistent temperature checks.
- Monitor State: Regularly examine the substance (
examine <SUBSTANCE>) to observe phase changes (e.g., solid -> liquid).
- Measure Temperature: Use a thermometer (
use thermometer on <SUBSTANCE>) to track thermal progress.
Error Handling & Notes
- If the initial
look around does not reveal the necessary items, use teleport to <ROOM> to navigate to the correct location (e.g., kitchen).
- All containers are pre-opened. Do not use
open or close actions.
- The skill assumes the heating device is initially deactivated and ready for use.
- For complex thermal protocols (specific ramp rates, hold times), consult the
references/thermal_procedures.md guide.
