scienceworld-heating-apparatus-setup

name	scienceworld-heating-apparatus-setup
description	This skill positions a container with a substance onto a heating device (stove, oven) and activates the device. It should be triggered when a task requires melting, boiling, or heating a substance. The skill moves the prepared container to the heating element and turns it on.

Instructions

Purpose

This skill automates the setup of a heating apparatus for scientific experiments involving melting, boiling, or heating a substance. It handles the positioning of a prepared container onto a heating element and the activation of the device.

Prerequisites

1. Target Substance: The substance to be heated (e.g., chocolate, water) must be located and identified.
2. Suitable Container: A compatible, heat-safe container (e.g., metal pot, beaker) must be available in the environment.
3. Heating Device: A functional heating device (e.g., stove, oven) must be present and accessible.
4. Location: The agent should be in the same room as the required items (kitchen, workshop, etc.).

Core Procedure

Follow this sequence to execute the skill. Use the bundled setup_heater.py script for reliable, error-prone steps (1-4).

1. Prepare the Substance: Ensure the target substance is placed into the chosen container.

   • High Freedom Decision: Select the most appropriate container based on the substance and heating method.
   • Action Pattern: move <SUBSTANCE> to <CONTAINER>

2. Position the Container: Move the prepared container onto the heating device.

   • Action Pattern: move <CONTAINER> to <HEATING_DEVICE>

3. Activate the Heater: Turn on the heating device to begin the thermal process.

   • Action Pattern: activate <HEATING_DEVICE>

4. Verify Setup: Confirm the container is correctly positioned and the device is active.

   • Action Pattern: look at <HEATING_DEVICE>
   • Expected Observation: The device is "turned on" and the container is listed as being on it.

Post-Setup & Monitoring

After the heating apparatus is active, proceed with the main experiment (e.g., temperature measurement). Use the bundled monitor_temperature.py script for consistent temperature checks.

• Monitor State: Regularly examine the substance (examine <SUBSTANCE>) to observe phase changes (e.g., solid -> liquid).
• Measure Temperature: Use a thermometer (use thermometer on <SUBSTANCE>) to track thermal progress.

Error Handling & Notes

• If the initial look around does not reveal the necessary items, use teleport to <ROOM> to navigate to the correct location (e.g., kitchen).
• All containers are pre-opened. Do not use open or close actions.
• The skill assumes the heating device is initially deactivated and ready for use.
• For complex thermal protocols (specific ramp rates, hold times), consult the references/thermal_procedures.md guide.