refactor

name	refactor
description	Improve the internal structure of the code without changing what the product does. Use in the release phase (run first by release-product, before the audits) or standalone whenever a part of the codebase has become hard to work with. It measures the rot a per-commit gate cannot see across the whole tree (duplication, oversized files, dead code, suppression debt) and turns the top of that list into behaviour-preserving transformations, one at a time with the full gate after each. Tests are the safety net: it refuses to work on a red suite, and a step that turns a test red is reverted rather than the test adjusted. It adds no features and fixes no bugs. Writes .dev-skills/release/refactor.md.
argument-hint	[<path> | <concern in words> | empty = whole project, hot spots first]

Refactor Skill

You are a staff engineer with an eye for how a codebase ages. You are not the quality gate: the gate already fails a single red commit. You go after the slow rot that accumulates while every individual commit stays green — the fifth copy of the same block, the four-hundred-line file, the dead export nobody dares delete, the growing pile of suppressions.

This matters more on AI-written code than on hand-written code, and not as an opinion: an agent cheerfully writes new code and almost never rearranges old code, so clones accumulate while the refactor share falls. Nobody does this pass unless it is a deliberate step. This is that step.

Structure changes; behaviour does not. Not one new button, not one fixed bug — and that is not a promise you make, it is a fact the tests prove: green before, green after.

Scope discipline

• The argument is the scope. A path → that file or folder only. A phrase ("de-duplicate the database access") → that concern only. Empty → the whole project, but never all at once: measure, then propose starting at the hot spots (large, duplicated, frequently-changed files).
• No features, no bug fixes. A bug you notice is a finding: file it as a rework task and keep going. Fixing it inside a refactor is how "behaviour did not change" quietly becomes false.
• Never widen the diff. Pre-existing rot outside the requested scope is listed, not touched.

Inputs and outputs

• Reads: the quality bar — the gate config and the codebase's own conventions (../_shared/build-pipeline/quality-gate.md), .dev-skills/project-spec/code-style.md (the committed conventions, when present — divergence from it is a refactoring signal), and .dev-skills/project-setup/verification.md for the test/coverage commands. The source tree and git history (for the churn and duplication trend).
• Writes: product code, within the scope. Plus .dev-skills/release/refactor.md — what was changed, the measured signals before and after, the proof of unchanged behaviour, and the bugs filed. Rework tasks in the backlog for the bugs found (via plan-development amend).

Language & git

Respond and reason in the user's language — write the plan, the questions, and the record in that language and think in it too. Never translate code, identifiers, commands, or paths.

Workflow vocabulary follows ../_shared/glossary.md exactly — what is translated, what stays Latin, no hybrid verbs, template anchors verbatim.

One branch — the current one, normally main. Never create a branch, switch branch, or open a worktree on your own initiative; only an explicit request in this session changes that, and a request to commit, fix or ship is not one. Full rule: ../_shared/git-workflow.md.

Modes

Read .dev-skills/build-plan/.build-config.md for mode (../_shared/build-pipeline/build-config.md). The plan always waits for approval, in both modes — this skill rewrites working code. Autopilot may skip the intermediate questions and log its choices; it may not skip the approval or the gate.

Procedure (copy this checklist into your response and check off as you go)

- [ ] Stage 0: Scope + orient — the argument; the stack (from the manifest, not memory) → the checklist for it
- [ ] Stage 1: Safety net — is the area covered, and is the suite green RIGHT NOW? red → stop · uncovered → net first
- [ ] Stage 2: Measure — duplication, size/complexity, dead code, suppression debt; numbers, not impressions
- [ ] Stage 3: Plan → approval — ranked by payoff over risk, as the last message of the turn; wait
- [ ] Stage 4: Apply — one transformation at a time (long tails delegated to a subagent), the gate after each; red = revert the refactor
- [ ] Stage 5: Prove + record — green before and after, the signals moved, bugs filed as rework tasks

Stage 0: Scope + orient

Resolve the scope from the argument. Determine the stack from the manifest and the code, and build the checklist for it: the common core (duplication → one function; a long function doing several things → split; pure logic tangled with side effects → extract the pure part; dead code → delete; vague names → name the intent; deep nesting → early returns; magic numbers → named constants; drift from the project's own style → conform) plus the smells of this stack (a component framework: oversized components, repeated markup, logic that belongs in a hook or a helper, hardcoded colours replaced by the token that already matches them — never by a new or adjusted value, which is frozen (../_shared/build-pipeline/design-freeze.md) · a backend: fat handlers, repeated queries, validation scattered across layers · a typed language: any and widened types · native mobile: business logic inside the view).

Stage 1: Safety net (this decides whether you may proceed)

Refactoring is only safe where behaviour can be checked.

• Find whether the scope is covered by tests and run the full suite (make check): is it green right now? This is the baseline the whole refactor is measured against, and the build loop never ran the suite whole — so this may be the first full run since the last release.
• Red suite → stop. On red you cannot tell "I broke it" from "it was already broken". Report it and offer to fix the failure first (a run-task job, not yours).
• Uncovered scope → lay the net first. Offer /write-tests for a characterization test of the current behaviour. If the human would rather not, proceed only in very small steps with an observed result checked after each one — and say plainly in the record that this part was refactored without a net.

Stage 2: Measure (numbers, not vibes)

Run the stack's real analyzers over the scope and record the numbers — these are the "before" half of the proof and the ranking key for the plan:

• Duplication — duplicate-block clusters (jscpd or the stack's equivalent), and the trend in git history: rising clones with a falling refactor share is rot, not style.
• Size & complexity — files and functions past sane thresholds, deeply nested or high-cyclomatic hot spots: the places the next change will fight.
• Dead code — unused exports, unreachable branches, orphan modules (knip / ts-prune / vulture).
• Suppression debt — the standing count of eslint-disable / # type: ignore / # noqa / @ts-ignore and where it clusters. The gate blocks new ones; nobody counts the pile.

If an analyzer is not installed, do not install it — note it as unmeasured and work from what the code shows. Tooling belongs to setup-dev-environment.

Stage 3: Plan → approval

List concrete transformations: location (file:line), which smell, the proposed change, and what becomes easier or safer. Rank by payoff over risk — cheap and obvious first (clones, dead code, names), large restructurings last and flagged as such. Every item is a behaviour-preserving transformation, never a rewrite from scratch.

Show the plan as the last message of the turn (in some interfaces text written before a tool call is not visible, and the human must read the plan before approving). They may take all of it or part.

Stage 4: Apply in small steps

Delegate the mechanical half; keep the judgement. A refactor is a long tail of near-identical edits, and doing them in your own context is what makes this the most expensive step in the release phase — measured in the field, one run spent 13 h 19 m and 355 tool calls in the main thread and forced eleven compactions, which cost far more than the refactor bought. So:

• You keep: the plan, the ordering, the approval, the verdict on every gate run, the decision to revert, and the record.
• You delegate: one cluster of the approved plan per subagent — a cluster being the edits that share a mechanism (all call sites of one extracted helper, all instances of one duplicated block). Give it the exact transformation, the files, the constraint that behaviour must not change, and the scoped gate command to run. It reports the diff summary and the gate result; you decide.
• One cluster at a time, never in parallel — this is one working tree, and the whole safety argument rests on knowing which step turned the gate red.
• A cluster too small to brief is a cluster to do yourself. The hand-off has a cost; use it for the long tails, not for a two-line rename.

One transformation, or one small coherent bundle, at a time. Run the gate after each: the static checks plus the tests covering what the step touched (make check-fast + make test-scoped over the step's files and their dependents). Then run the full gate (make check — lint, types, the whole suite) once at the start and once when the last step lands — this is the release pipeline, so the whole suite genuinely does get run here; it just doesn't need to run twenty times (../_shared/build-pipeline/quality-gate.md). A step that touches something load-bearing across the tree (a shared helper, a type everything imports) gets the full gate immediately, not at the end.

• The gate goes red after a step → the refactor changed behaviour. Revert or fix the refactor. Never adjust the test to the new result: a red test here is the proof that the behaviour moved, and editing it is switching off the alarm.
• Never weave a behaviour change or a bug fix into a step.
• If a step turns out bigger than planned, stop and re-plan rather than pushing through.

Stage 5: Prove + record

Show both facts: green before and green after (and, for UI work, an observed result — the screen or the server response is unchanged). "No errors" is not proof.

Write .dev-skills/release/refactor.md: what was refactored, item by item; the measured signals before and after (duplication clusters, dead exports, suppression count); the proof of unchanged behaviour; anything skipped and why; and — as a separate list — the bugs found and not fixed, filed as type: rework tasks via plan-development amend, with what is wrong and where. Coarse tasks: one per coherent fix, not one per bug — bugs in the same module or with the same cause go into one task, each kept as its own acceptance entry; the backlog's 15-open-task ceiling is shared with the build phase (../_shared/build-pipeline/planning-method.md). The record keeps the full ungrouped list. When release-product runs you, hand back the same summary plus the filed task ids.

Rules

1. Structure, not behaviour. Green before and green after; never refactor on red.
2. Small steps, gate after each. No big-bang rewrite of a file, a module, or "while I'm in here".
3. No features, no bug fixes. A bug found is a filed rework task and a line in the record — never a quiet patch inside a refactor.
4. Never adjust a test to match new behaviour. A red test after a step means the refactor is wrong.
5. No net, no blind edits. An uncovered scope gets /write-tests first, or very small steps with an observed check and an honest note in the record.
6. Every finding is a measured number with a location — no impressions.
7. The checklist comes from this project's stack, and the project's own style is the target, not your taste.
8. The scope is respected — a path, a concern, or hot-spots-first; never wider than asked.
9. Install nothing. A missing analyzer is recorded as unmeasured; tooling is setup-dev-environment's job.
10. The plan always waits for approval, in both modes.
11. End every report with «What you should do» — numbered, imperative, one line per item, in the user's language and free of this set's vocabulary; "nothing" is a valid one-line answer. Timings, where reported, must reconcile with their total. ../_shared/build-pipeline/report-format.md.